Air-breathing hypersonic vehicle has great military and potential economic value due to its characteristics:high velocity,long range,quick response.Therefore,the development of hypersonic vehicle and its guidance and ...Air-breathing hypersonic vehicle has great military and potential economic value due to its characteristics:high velocity,long range,quick response.Therefore,the development of hypersonic vehicle and its guidance and control technology are reviewed in this paper.Firstly,the development and classification of hypersonic vehicles around the world are summarized,and the geometric configuration and mission profile of typical air-breathing hypersonic vehicle are given.Secondly,the control difficulties of air-breathing hypersonic vehicle are introduced,including integrated design of engine and fuselage,static instability,strong nonlinearity,uncertain aerodynamic parameters,etc.According to its control requirements,the control methods considering external disturbance,fault-tolerant control methods,anti-saturation methods,and prescribed performance control methods considering transient performance constraints are summarized respectively.The classification and comparison of various control methods are given,and the frontiers of theoretical development are analyzed.Finally,considering the effects of composite disturbances,the design of terminal guidance law under multiple constraints is overviewed,including guidance law with angle constraint,velocity constraint,acceleration constraint and time constraint.Similarly,the classification of guidance law design methods under different constraints,their advantages as well as the future development trend and requirements are introduced.展开更多
Automatically formed roadway(AFR)by roof cutting with bolt grouting(RCBG)is a new deep coal mining technology.By using this technology,the broken roadway roof is strengthened,and roof cutting is applied to cut off str...Automatically formed roadway(AFR)by roof cutting with bolt grouting(RCBG)is a new deep coal mining technology.By using this technology,the broken roadway roof is strengthened,and roof cutting is applied to cut off stress transfer between the roadway and gob to ensure the collapse of the overlying strata.The roadway is automatically formed owing to the broken expansion characteristics of the collapsed strata and mining pressure.Taking the Suncun Coal Mine as the engineering background,the control effect of this new technology on roadways was studied.To compare the law of stress evolution and the surrounding rock control mechanisms between AFR and traditional gob-side entry driving,a comparative study of geomechanical model tests on the above methods was carried out.The results showed that the new technology of AFR by RCBG effectively reduced the stress concentration of the roadway compared with gob-side entry driving.The side abutment pressure peak of the solid coal side was reduced by 24.3%,which showed an obvious pressure-releasing effect.Moreover,the position of the side abutment pressure peak was far from the solid coal side,making it more beneficial for roadway stability.The deformation of AFR surrounding rock was also smaller than the deformation of the gob-side entry driving by the overload test.The former was more beneficial for roadway stability than the latter under higher stress conditions.Field application tests showed that the new technology can effectively control roadway deformation.Moreover,the technology reduced roadway excavation and avoided resource waste caused by reserved coal pillars.展开更多
The occurrence of osteoarthritis(OA)is highly associated with the reduced lubrication property of the joint,where a progressive and irreversible damage of the articular cartilage and consecutive inflammatory response ...The occurrence of osteoarthritis(OA)is highly associated with the reduced lubrication property of the joint,where a progressive and irreversible damage of the articular cartilage and consecutive inflammatory response dominate the mechanism.In this study,bioinspired by the super-lubrication property of cartilage and catecholamine chemistry of mussel,we successfully developed injectable hydrogel microspheres with enhanced lubrication and controllable drug release for OA treatment.Particularly,the lubricating microspheres(GelMA@DMA-MPC)were fabricated by dip coating a self-adhesive polymer(DMA-MPC,synthesized by free radical copolymerization)on superficial surface of photo-crosslinked methacrylate gelatin hydrogel microspheres(GelMA,prepared via microfluidic technology),and encapsulated with an anti-inflammatory drug of diclofenac sodium(DS)to achieve the dual-functional performance.The tribological test and drug release test showed the enhanced lubrication and sustained drug release of the GelMA@DMA-MPC microspheres.In addition,the functionalized microspheres were intra-articularly injected into the rat knee joint with an OA model,and the biological tests including qRT-PCR,immunofluorescence staining assay,X-ray radiography and histological staining assay all revealed that the biocompatible microspheres provided significant therapeutic effect against the development of OA.In summary,the injectable hydrogel microspheres developed herein greatly improved lubrication and achieved sustained local drug release,therefore representing a facile and promising technique for the treatment of OA.展开更多
Ni3Al-based superalloy IC10 is widely used in high temperature components of aeroengines because of its superior mechanical properties.In this paper,the creep feed grinding properties of IC10 were investigated experim...Ni3Al-based superalloy IC10 is widely used in high temperature components of aeroengines because of its superior mechanical properties.In this paper,the creep feed grinding properties of IC10 were investigated experimentally.The effects of grinding parameters on the grinding forces and temperature were examined.Moreover,the influences of surface roughness and hardening on the high-cycle fatigue life of IC10 specimens were studied.To control the creep feed grinding parameters and enhance the fatigue life of IC10 components,the experimental results were summarized to offer a useful reference point.It is concluded that,the grinding depth is the most important factor which influencing the grinding forces and temperature;the surface roughness is the main and unfavorable factor on the fatigue life of IC10,while the surface hardening has a positive influence on the fatigue life;to obtain a better surface quality and improve the fatigue life of IC 10,the recommended grinding parameter domain involves wheel speed 2[15,20]m/s,feed rate∈[150,200]mm/min,and grinding depth∈[0.4,0.5]mm.展开更多
Digital twin is currently undergoing a significant transformation from the conceptual and theoretical research phase to the implementation and application phase.However,a universally adaptable research and development...Digital twin is currently undergoing a significant transformation from the conceptual and theoretical research phase to the implementation and application phase.However,a universally adaptable research and development platform for digital twin is critically needed to meet the development requirements.Specifically,a publicly accessible simulation,testing,and validation platform which can support digital twin model building,data processing,algorithm design,configuration,etc.,is urgently required for researchers.Furthermore,for developers from the industry,a lowcode development platform that can offer a customizable suite of functions such as model creation,data management,protocol configuration,and visualization is urgently needed.Meanwhile,for enterprise users,there is a lack of an application management platform that can be configured and migrated for various application scenarios,functions,and modes.Therefore,based on the system research of digital twin theories and key technologies by the authors(such as the five-dimension digital twin model,digital twin modeling and digital twin data theory,digital twin standards,and so on),a digital twin software platform reference architecture,namely make Twin,is proposed and designed,as well as its ten core functions.The workflow of the make Twin and the interaction mechanisms among its core functions are described.Finally,a digital twin application system for a chemical fiber textile shop floor(CFTS)which was developed according to make Twin,is introduced,which validates the proposed reference architecture.展开更多
Metal additive manufacturing(AM)has been extensively studied in recent decades.Despite the significant progress achieved in manufacturing complex shapes and structures,challenges such as severe cracking when using exi...Metal additive manufacturing(AM)has been extensively studied in recent decades.Despite the significant progress achieved in manufacturing complex shapes and structures,challenges such as severe cracking when using existing alloys for laser powder bed fusion(L-PBF)AM have persisted.These challenges arise because commercial alloys are primarily designed for conventional casting or forging processes,overlooking the fast cooling rates,steep temperature gradients and multiple thermal cycles of L-PBF.To address this,there is an urgent need to develop novel alloys specifically tailored for L-PBF technologies.This review provides a comprehensive summary of the strategies employed in alloy design for L-PBF.It aims to guide future research on designing novel alloys dedicated to L-PBF instead of adapting existing alloys.The review begins by discussing the features of the L-PBF processes,focusing on rapid solidification and intrinsic heat treatment.Next,the printability of the four main existing alloys(Fe-,Ni-,Al-and Ti-based alloys)is critically assessed,with a comparison of their conventional weldability.It was found that the weldability criteria are not always applicable in estimating printability.Furthermore,the review presents recent advances in alloy development and associated strategies,categorizing them into crack mitigation-oriented,microstructure manipulation-oriented and machine learning-assisted approaches.Lastly,an outlook and suggestions are given to highlight the issues that need to be addressed in future work.展开更多
In order to estimate the residual stresses in Ti2AlNb alloy jointed by electron beam welding (EBW), a computational approach based on finite element method was developed. Meanwhile, experiments were carried out to ver...In order to estimate the residual stresses in Ti2AlNb alloy jointed by electron beam welding (EBW), a computational approach based on finite element method was developed. Meanwhile, experiments were carried out to verify the numerical results. The comparison between the simulation results and measurements suggests that the developed computational approach has sufficient accuracy to predict the welding residual stress distributions. The results show that the central area of the fusion zone suffers tensile stresses in three directions. When the other parameters remain unchanged, the focus current has great impact on the weld shape and size, and then affects the residual stress level significantly. Moreover, the thick plate full-penetrated EBW weld suffers near 1000 MPa tensile stress of Z-direction in the center of the fusion zone. The wider weld has lower tensile stress in Z-direction, resulting in lower risk for cracking.展开更多
Presents information on a study which discussed the inverse eigenvalue problem used in engineering. Solvability conditions and general form of the solutions in real number field; Theorems; Expression of solution.
In order to clarify the characteristics and formation mechanism of the reheat cracking in Ti2AlNb weldments,a series of heat treatment conditions were performed to the circular joints welded by electron beam,and then ...In order to clarify the characteristics and formation mechanism of the reheat cracking in Ti2AlNb weldments,a series of heat treatment conditions were performed to the circular joints welded by electron beam,and then the macrostructures and microstructures were investigated using optical microscopy,scanning electron microscopy,X-ray diffractometry,and transmission electron microscopy.The results show that the reheat cracking occurs primarily along the grain boundaries in the weld when the Ti2AlNb circular welded joints are heated up to about 700℃.During the heat treatment,an almost complete transformation of B2→O happens while the temperature goes up through the O single-phase region.Then,O→B2+O phase transformation occurs primarily along the grain boundaries as the weld metal continues to heat up to the B2+O dual-phase region.Under the high tension stress consisting of welding residual stress and phase transformation stress,reheat cracking occurs at the interface between the B2+O dual-phase layer and the O-phase matrix.展开更多
By deploying the ubiquitous and reliable coverage of low Earth orbit(LEO)satellite networks using optical inter satel-lite link(OISL),computation offloading services can be provided for any users without proximal serv...By deploying the ubiquitous and reliable coverage of low Earth orbit(LEO)satellite networks using optical inter satel-lite link(OISL),computation offloading services can be provided for any users without proximal servers,while the resource limita-tion of both computation and storage on satellites is the impor-tant factor affecting the maximum task completion time.In this paper,we study a delay-optimal multi-satellite collaborative computation offloading scheme that allows satellites to actively migrate tasks among themselves by employing the high-speed OISLs,such that tasks with long queuing delay will be served as quickly as possible by utilizing idle computation resources in the neighborhood.To satisfy the delay requirement of delay-sensi-tive task,we first propose a deadline-aware task scheduling scheme in which a priority model is constructed to sort the order of tasks being served based on its deadline,and then a delay-optimal collaborative offloading scheme is derived such that the tasks which cannot be completed locally can be migrated to other idle satellites.Simulation results demonstrate the effective-ness of our multi-satellite collaborative computation offloading strategy in reducing task complement time and improving resource utilization of the LEO satellite network.展开更多
The majority of the projectiles used in the hypersonic penetration study are solid flat-nosed cylindrical projectiles with a diameter of less than 20 mm.This study aims to fill the gap in the experimental and analytic...The majority of the projectiles used in the hypersonic penetration study are solid flat-nosed cylindrical projectiles with a diameter of less than 20 mm.This study aims to fill the gap in the experimental and analytical study of the evolution of the nose shape of larger hollow projectiles under hypersonic penetration.In the hypersonic penetration test,eight ogive-nose AerMet100 steel projectiles with a diameter of 40 mm were launched to hit concrete targets with impact velocities that ranged from 1351 to 1877 m/s.Severe erosion of the projectiles was observed during high-speed penetration of heterogeneous targets,and apparent localized mushrooming occurred in the front nose of recovered projectiles.By examining the damage to projectiles,a linear relationship was found between the relative length reduction rate and the initial kinetic energy of projectiles in different penetration tests.Furthermore,microscopic analysis revealed the forming mechanism of the localized mushrooming phenomenon for eroding penetration,i.e.,material spall erosion abrasion mechanism,material flow and redistribution abrasion mechanism and localized radial upsetting deformation mechanism.Finally,a model of highspeed penetration that included erosion was established on the basis of a model of the evolution of the projectile nose that considers radial upsetting;the model was validated by test data from the literature and the present study.Depending upon the impact velocity,v0,the projectile nose may behave as undistorted,radially distorted or hemispherical.Due to the effects of abrasion of the projectile and enhancement of radial upsetting on the duration and amplitude of the secondary rising segment in the pulse shape of projectile deceleration,the predicted DOP had an upper limit.展开更多
The identification of intercepted radio fuze modulation types is a prerequisite for decision-making in interference systems.However,the electromagnetic environment of modern battlefields is complex,and the signal-to-n...The identification of intercepted radio fuze modulation types is a prerequisite for decision-making in interference systems.However,the electromagnetic environment of modern battlefields is complex,and the signal-to-noise ratio(SNR)of such environments is usually low,which makes it difficult to implement accurate recognition of radio fuzes.To solve the above problem,a radio fuze automatic modulation recognition(AMR)method for low-SNR environments is proposed.First,an adaptive denoising algorithm based on data rearrangement and the two-dimensional(2D)fast Fourier transform(FFT)(DR2D)is used to reduce the noise of the intercepted radio fuze intermediate frequency(IF)signal.Then,the textural features of the denoised IF signal rearranged data matrix are extracted from the statistical indicator vectors of gray-level cooccurrence matrices(GLCMs),and support vector machines(SVMs)are used for classification.The DR2D-based adaptive denoising algorithm achieves an average correlation coefficient of more than 0.76 for ten fuze types under SNRs of-10 d B and above,which is higher than that of other typical algorithms.The trained SVM classification model achieves an average recognition accuracy of more than 96%on seven modulation types and recognition accuracies of more than 94%on each modulation type under SNRs of-12 d B and above,which represents a good AMR performance of radio fuzes under low SNRs.展开更多
We simulate the gas-atomization process of a close-coupled annular nozzle for vacuum induction gas atomization at a three-dimensional scale.Moreover,the relationship between the simulated droplet type and experimental...We simulate the gas-atomization process of a close-coupled annular nozzle for vacuum induction gas atomization at a three-dimensional scale.Moreover,the relationship between the simulated droplet type and experimentally metallic powder is established by comparing the morphology of droplets with powders.Herein,the primary atomization process is described by the volume-of-fluid(VOF)approach,whereas the prediction of powder diameter after secondary atomization is realized by the VOF-Lagrangian method.In addition,to completely reflect the breaking and deformation process of the metallic flow,we employ the VOF model to simulate the secondary atomization process of a single ellipsoidal droplet.The results show that the primary atomization process includes the formation of surface liquid film,appearance of serrated ligaments,and shredding of ligaments.Further,gas recirculation zone plays an important role in formation of the umbrella-shaped liquid film.The secondary atomization process is divided into droplet convergence and dispersion stages,and the predicted powder diameter is basically consistent with the experiment.In general,the four main powder shapes are formed by the interaction of five different typical droplets.展开更多
We investigated the asymmetric tension-compression(T-C)behavior of ZA21 bars with bimodal and uniform structures through axial tension and compression tests.The results show that the yield strengths of bars having bim...We investigated the asymmetric tension-compression(T-C)behavior of ZA21 bars with bimodal and uniform structures through axial tension and compression tests.The results show that the yield strengths of bars having bimodal structure are 206.42 and 140.28 MPa under tension and compression,respectively,which are higher than those of bars having uniform structure with tensile and compressive yield strength of 183.71 and 102.86 MPa,respectively.Prismatic slip and extension twinning under tension and basal slip and extension twinning under compression dominate the yield behavior and induce the T-C asymmetry.However,due to the basal slip activated in fine grains under tension and the inhibition of extension twinning by fine grains under compression,the bimodal structure possesses a lower T-C asymmetry(0.68)compared to the uniform structure(0.56).Multiple extension twins occur during deformation,and the selection of twin variants depends on the Schmid factor of the six variants activated by parent grains.Furthermore,the strengthening effect of the bimodal structure depends on the grain size and the ratio of coarse and fine grains.展开更多
Taking CL-20(Hexanitrohexaazaisowurtzitane)-based aluminized explosives with high gurney energy as the research object, this research experimentally investigates the work capability of different aluminized explosive f...Taking CL-20(Hexanitrohexaazaisowurtzitane)-based aluminized explosives with high gurney energy as the research object, this research experimentally investigates the work capability of different aluminized explosive formulations when driving metal flyer plates in the denotation wave propagation direction.The research results showed that the formulations with 43 μm aluminum(Al) powder particles(The particle sizes of Al powder were in the range of 2~43 μm) exhibited the optimal performance in driving flyer plates along the denotation wave propagation direction. Compared to the formulations with Al powder 13 μm, the formulations with Al powder 2 μm delivered better performance in accelerating metal flyer plates in the early stage, which, however, turned to be poor in the later stage. The CL-20-based explosives containing 25% Al far under-performed those containing 15% Al. Based on the proposed quasi-isentropic hypothesis, relevant isentropy theories, and the functional relationship between detonation parameters and entropy as well as Al reaction degree, the characteristic lines of aluminized explosives in accelerating flyer plates were theoretically studied, a quasi-isentropic theoretical model for the aluminized explosive driving the flyer plate was built and the calculation methods for the variations of flyer plate velocity, Al reaction degree, and detonation product parameters with time and axial positions were developed. The theoretical model built is verified by the experimental results of the CL-20-based aluminized explosive driving flyer plate. It was found that the model built could accurately calculate the variations of flyer plate velocity and Al reaction degree over time. In addition, how physical parameters including detonation product pressure and temperature varied with time and axial positions was identified. The action time of the positive pressure after the detonation of aluminized explosives was found prolonged and the downtrend of the temperature was slowed down and even reversed to a slight r展开更多
Experimental analysis was conducted to study the impact of fuel-air mixing and dilution jet on the temperature distribution in a small gas turbine combustor using various optical diagnostic techniques.The strength and...Experimental analysis was conducted to study the impact of fuel-air mixing and dilution jet on the temperature distribution in a small gas turbine combustor using various optical diagnostic techniques.The strength and velocity of the swirler at the venturi exit were adjusted to modify the fuel-air mixture,which is presumed to dominate the heat release of the main combustion zone.Additionally,the dilution hole configuration,including the number and size of the holes,was varied to investigate the dilution effect on outlet temperature distribution.Various optical diagnostic techniques,such as particle image velocimetry,planar Mie scattering,and OH~*chemiluminescence,were used to measure the flow field,fuel spray distribution,and flame structure,respectively.A reduction in swirling strength led to a decrease in the average flow rate in the throat,which improved the structure and symmetry of the axial vortex system in the sleeve,enhanced the mixing of fuel and gas in the dome swirling air,and ultimately,improved the temperature uniformity of the heat release zone.Compared to larger and sparse dilution jets,smaller and dense dilution jets tended to generate hot spots shifted towards the radial middle area.展开更多
The mathematical model of conical involute gears is developed based on the theory of gearing and the generating mechanism. Tooth contact analysis （TCA） is performed to examine the meshing and bearing contact of the ...The mathematical model of conical involute gears is developed based on the theory of gearing and the generating mechanism. Tooth contact analysis （TCA） is performed to examine the meshing and bearing contact of the conical involute gear pairs with intersected and crossed axes. In addition, the principal directions and curvatures of the gear surfaces are investigated and the contact ellipses of the mating tooth surfaces are also studied. Finally, the numerical illustrative examples are provided to demonstrate the computational results, test gears are made for tooth-bearing tests, and the conclusion is verified that the theory has the applicability.展开更多
The advance in communication technology has triggered worldwide concern on electromagnetic wave pollution.To cope with this challenge,exploring high-performance electromagnetic(EM)wave absorbing materials with dielect...The advance in communication technology has triggered worldwide concern on electromagnetic wave pollution.To cope with this challenge,exploring high-performance electromagnetic(EM)wave absorbing materials with dielectric and magnetic losses coupling is urgently required.Of the EM wave absorbers,transition metal diborides(TMB2)possess excellent dielectric loss capability.However,akin to other single dielectric materials,poor impedance match leads to inferior performance.High-entropy engineering is expected to be effective in tailoring the balance between dielectric and magnetic losses through compositional design.Herein,three HE TMB2 powders with nominal equimolar TM including HE TMB2-I(TM=Zr,Hf,Nb,Ta),HE TMB2-2(TM=Ti,Zr,Hf,Nb,Ta),and HE TMB2-3(TM=Cr,Zr,Hf,Nb,Ta)have been designed and prepared by one-step boro/carbothermal reduction.As a result of synergistic effects of strong attenuation capability and impedance match,HE TMB2-1 shows much improved performance with the optimal minimum reflection loss(RL_(min))of-59.6 dB(8.48 GHz,2.68 mm)and effective absorption bandwidth(EAB)of 7.6 GHz(2.3 mm).Most impressively,incorporating Cr in HE TMB2-3 greatly improves the impedance match over 1-18 GHz,thus achieving the RLmin of-56.2 dB(8.48 GHz,2.63 mm)and the EAB of 11.0 GHz(2.2 mm),which is superior to most other EM wave absorbing materials.This work reveals that constructing high-entropy compounds,especially by incorporating magnetic elements,is effectual in tailoring the impedance match for highly conductive compounds,i.e.,tuning electrical conductivity and boosting magnetic loss to realize highly efficient and broadband EM wave absorption with dielectric and magnetic coupling in single-phase materials.展开更多
Recurrent oral ulcer is a painful oral mucosal disorder that affects 20%of the world’s population.The lack of a radical cure due to its unknown underlying cause calls for innovative symptomatic treatments.This work r...Recurrent oral ulcer is a painful oral mucosal disorder that affects 20%of the world’s population.The lack of a radical cure due to its unknown underlying cause calls for innovative symptomatic treatments.This work reports a hyaluronic acid-based dissolvablemicroneedle patch(ROUMNpatch,short for recurrent oral ulcer microneedle)loaded with dexamethasone acetate,vitamin C and tetracaine hydrochloride for the treatment of recurrent oral ulcers.The ROUMN patch shows enhancement in both the anti-inflammatory effect elicited by dexamethasone and the pro-proliferation effect of vitamin C.In vitro experiments show that ROUMN has a higher efficiency in suppressing lipopolysaccharide(LPS)-induced interleukin-6(IL-6)expression than dexamethasone alone.Cell proliferation and migrationwere also significantly promoted byROUMNcompared to vitamin C alone.The healing-promoting effect of ROUMN was also verified in vivo using an acetic acid-cauterized oral ulcer model in rats.ROUMN as a treatment accelerated the healing process of oral ulcers,shortening the total healing time to 5 days compared with the 7 days required by treatment using watermelon frost,a commonly used over-the-counter(OTC)drug for oral ulcers.The rapid dissolution of the hyaluronic acid-based microneedles and the superior healing-promoting effect of the drug combination could lead to a broad application prospect of the ROUMN patch in the treatment of recurrent oral ulcers.展开更多
基金co-supported by the National Natural Science Foundation of China(No.12102343)the Key Program of the National Natural Science Foundation of China(No.U2013206)+1 种基金Shanghai Space Science and Technology Innovation Fund,China(No.SAST2020-072)the Fundamental Research Funds for the Central Universities,China(No.D5000210833)。
文摘Air-breathing hypersonic vehicle has great military and potential economic value due to its characteristics:high velocity,long range,quick response.Therefore,the development of hypersonic vehicle and its guidance and control technology are reviewed in this paper.Firstly,the development and classification of hypersonic vehicles around the world are summarized,and the geometric configuration and mission profile of typical air-breathing hypersonic vehicle are given.Secondly,the control difficulties of air-breathing hypersonic vehicle are introduced,including integrated design of engine and fuselage,static instability,strong nonlinearity,uncertain aerodynamic parameters,etc.According to its control requirements,the control methods considering external disturbance,fault-tolerant control methods,anti-saturation methods,and prescribed performance control methods considering transient performance constraints are summarized respectively.The classification and comparison of various control methods are given,and the frontiers of theoretical development are analyzed.Finally,considering the effects of composite disturbances,the design of terminal guidance law under multiple constraints is overviewed,including guidance law with angle constraint,velocity constraint,acceleration constraint and time constraint.Similarly,the classification of guidance law design methods under different constraints,their advantages as well as the future development trend and requirements are introduced.
基金This work was supported by the National Natural Science Foundation of China(Nos.51874188,52074164,42077267,and 51927807)the Natural Science Foundation of Shandong Province,China(Nos.2019SDZY04 and ZR2020JQ23)the Project of Shandong Province Higher Educational Youth Innovation Science and Technology Program,China(No.2019KJG013).
文摘Automatically formed roadway(AFR)by roof cutting with bolt grouting(RCBG)is a new deep coal mining technology.By using this technology,the broken roadway roof is strengthened,and roof cutting is applied to cut off stress transfer between the roadway and gob to ensure the collapse of the overlying strata.The roadway is automatically formed owing to the broken expansion characteristics of the collapsed strata and mining pressure.Taking the Suncun Coal Mine as the engineering background,the control effect of this new technology on roadways was studied.To compare the law of stress evolution and the surrounding rock control mechanisms between AFR and traditional gob-side entry driving,a comparative study of geomechanical model tests on the above methods was carried out.The results showed that the new technology of AFR by RCBG effectively reduced the stress concentration of the roadway compared with gob-side entry driving.The side abutment pressure peak of the solid coal side was reduced by 24.3%,which showed an obvious pressure-releasing effect.Moreover,the position of the side abutment pressure peak was far from the solid coal side,making it more beneficial for roadway stability.The deformation of AFR surrounding rock was also smaller than the deformation of the gob-side entry driving by the overload test.The former was more beneficial for roadway stability than the latter under higher stress conditions.Field application tests showed that the new technology can effectively control roadway deformation.Moreover,the technology reduced roadway excavation and avoided resource waste caused by reserved coal pillars.
基金This study was financially supported by National Natural Science Foundation of China(52022043 and 81930051)Tsinghua University-Peking Union Medical College Hospital Initiative Scientific Research Program(20191080593)+3 种基金Precision Medicine Foundation,Tsinghua University,China(10001020107)Shanghai Jiao Tong University“Medical and Research”Program(ZH2018ZDA04)Science and Technology Commission of Shanghai Municipality(18ZR1434200,18140901500 and 19440760400)Research Fund of State Key Laboratory of Tribology,Tsinghua University,China(SKLT2020C11).
文摘The occurrence of osteoarthritis(OA)is highly associated with the reduced lubrication property of the joint,where a progressive and irreversible damage of the articular cartilage and consecutive inflammatory response dominate the mechanism.In this study,bioinspired by the super-lubrication property of cartilage and catecholamine chemistry of mussel,we successfully developed injectable hydrogel microspheres with enhanced lubrication and controllable drug release for OA treatment.Particularly,the lubricating microspheres(GelMA@DMA-MPC)were fabricated by dip coating a self-adhesive polymer(DMA-MPC,synthesized by free radical copolymerization)on superficial surface of photo-crosslinked methacrylate gelatin hydrogel microspheres(GelMA,prepared via microfluidic technology),and encapsulated with an anti-inflammatory drug of diclofenac sodium(DS)to achieve the dual-functional performance.The tribological test and drug release test showed the enhanced lubrication and sustained drug release of the GelMA@DMA-MPC microspheres.In addition,the functionalized microspheres were intra-articularly injected into the rat knee joint with an OA model,and the biological tests including qRT-PCR,immunofluorescence staining assay,X-ray radiography and histological staining assay all revealed that the biocompatible microspheres provided significant therapeutic effect against the development of OA.In summary,the injectable hydrogel microspheres developed herein greatly improved lubrication and achieved sustained local drug release,therefore representing a facile and promising technique for the treatment of OA.
基金supported by NSAF(No.U1830122)the National Natural Science Foundation of China(No.51775443)。
文摘Ni3Al-based superalloy IC10 is widely used in high temperature components of aeroengines because of its superior mechanical properties.In this paper,the creep feed grinding properties of IC10 were investigated experimentally.The effects of grinding parameters on the grinding forces and temperature were examined.Moreover,the influences of surface roughness and hardening on the high-cycle fatigue life of IC10 specimens were studied.To control the creep feed grinding parameters and enhance the fatigue life of IC10 components,the experimental results were summarized to offer a useful reference point.It is concluded that,the grinding depth is the most important factor which influencing the grinding forces and temperature;the surface roughness is the main and unfavorable factor on the fatigue life of IC10,while the surface hardening has a positive influence on the fatigue life;to obtain a better surface quality and improve the fatigue life of IC 10,the recommended grinding parameter domain involves wheel speed 2[15,20]m/s,feed rate∈[150,200]mm/min,and grinding depth∈[0.4,0.5]mm.
基金financially supported in part by the National Key Research and Development Program of China under Grant 2020YFB1708400the National Natural Science Foundation of China(NSFC)under Grant 52120105008 and Grants 52005026。
文摘Digital twin is currently undergoing a significant transformation from the conceptual and theoretical research phase to the implementation and application phase.However,a universally adaptable research and development platform for digital twin is critically needed to meet the development requirements.Specifically,a publicly accessible simulation,testing,and validation platform which can support digital twin model building,data processing,algorithm design,configuration,etc.,is urgently required for researchers.Furthermore,for developers from the industry,a lowcode development platform that can offer a customizable suite of functions such as model creation,data management,protocol configuration,and visualization is urgently needed.Meanwhile,for enterprise users,there is a lack of an application management platform that can be configured and migrated for various application scenarios,functions,and modes.Therefore,based on the system research of digital twin theories and key technologies by the authors(such as the five-dimension digital twin model,digital twin modeling and digital twin data theory,digital twin standards,and so on),a digital twin software platform reference architecture,namely make Twin,is proposed and designed,as well as its ten core functions.The workflow of the make Twin and the interaction mechanisms among its core functions are described.Finally,a digital twin application system for a chemical fiber textile shop floor(CFTS)which was developed according to make Twin,is introduced,which validates the proposed reference architecture.
基金financially supported by the National Key Research and Development Program of China(2022YFB4600302)National Natural Science Foundation of China(52090041)+1 种基金National Natural Science Foundation of China(52104368)National Major Science and Technology Projects of China(J2019-VII-0010-0150)。
文摘Metal additive manufacturing(AM)has been extensively studied in recent decades.Despite the significant progress achieved in manufacturing complex shapes and structures,challenges such as severe cracking when using existing alloys for laser powder bed fusion(L-PBF)AM have persisted.These challenges arise because commercial alloys are primarily designed for conventional casting or forging processes,overlooking the fast cooling rates,steep temperature gradients and multiple thermal cycles of L-PBF.To address this,there is an urgent need to develop novel alloys specifically tailored for L-PBF technologies.This review provides a comprehensive summary of the strategies employed in alloy design for L-PBF.It aims to guide future research on designing novel alloys dedicated to L-PBF instead of adapting existing alloys.The review begins by discussing the features of the L-PBF processes,focusing on rapid solidification and intrinsic heat treatment.Next,the printability of the four main existing alloys(Fe-,Ni-,Al-and Ti-based alloys)is critically assessed,with a comparison of their conventional weldability.It was found that the weldability criteria are not always applicable in estimating printability.Furthermore,the review presents recent advances in alloy development and associated strategies,categorizing them into crack mitigation-oriented,microstructure manipulation-oriented and machine learning-assisted approaches.Lastly,an outlook and suggestions are given to highlight the issues that need to be addressed in future work.
基金Project(CALT201309)supported by Joint Innovation Fund for China Academy of Launch Vehicle Technology and Colleges
文摘In order to estimate the residual stresses in Ti2AlNb alloy jointed by electron beam welding (EBW), a computational approach based on finite element method was developed. Meanwhile, experiments were carried out to verify the numerical results. The comparison between the simulation results and measurements suggests that the developed computational approach has sufficient accuracy to predict the welding residual stress distributions. The results show that the central area of the fusion zone suffers tensile stresses in three directions. When the other parameters remain unchanged, the focus current has great impact on the weld shape and size, and then affects the residual stress level significantly. Moreover, the thick plate full-penetrated EBW weld suffers near 1000 MPa tensile stress of Z-direction in the center of the fusion zone. The wider weld has lower tensile stress in Z-direction, resulting in lower risk for cracking.
基金Supported by the National Nature Science Fundation of China.
文摘Presents information on a study which discussed the inverse eigenvalue problem used in engineering. Solvability conditions and general form of the solutions in real number field; Theorems; Expression of solution.
文摘In order to clarify the characteristics and formation mechanism of the reheat cracking in Ti2AlNb weldments,a series of heat treatment conditions were performed to the circular joints welded by electron beam,and then the macrostructures and microstructures were investigated using optical microscopy,scanning electron microscopy,X-ray diffractometry,and transmission electron microscopy.The results show that the reheat cracking occurs primarily along the grain boundaries in the weld when the Ti2AlNb circular welded joints are heated up to about 700℃.During the heat treatment,an almost complete transformation of B2→O happens while the temperature goes up through the O single-phase region.Then,O→B2+O phase transformation occurs primarily along the grain boundaries as the weld metal continues to heat up to the B2+O dual-phase region.Under the high tension stress consisting of welding residual stress and phase transformation stress,reheat cracking occurs at the interface between the B2+O dual-phase layer and the O-phase matrix.
基金This work was supported by the National Key Research and Development Program of China(2021YFB2900600)the National Natural Science Foundation of China(61971041+2 种基金62001027)the Beijing Natural Science Foundation(M22001)the Technological Innovation Program of Beijing Institute of Technology(2022CX01027).
文摘By deploying the ubiquitous and reliable coverage of low Earth orbit(LEO)satellite networks using optical inter satel-lite link(OISL),computation offloading services can be provided for any users without proximal servers,while the resource limita-tion of both computation and storage on satellites is the impor-tant factor affecting the maximum task completion time.In this paper,we study a delay-optimal multi-satellite collaborative computation offloading scheme that allows satellites to actively migrate tasks among themselves by employing the high-speed OISLs,such that tasks with long queuing delay will be served as quickly as possible by utilizing idle computation resources in the neighborhood.To satisfy the delay requirement of delay-sensi-tive task,we first propose a deadline-aware task scheduling scheme in which a priority model is constructed to sort the order of tasks being served based on its deadline,and then a delay-optimal collaborative offloading scheme is derived such that the tasks which cannot be completed locally can be migrated to other idle satellites.Simulation results demonstrate the effective-ness of our multi-satellite collaborative computation offloading strategy in reducing task complement time and improving resource utilization of the LEO satellite network.
基金the National Natural Science Foundation of China(Grant No.12102050)the Open Fund of State Key Laboratory of Explosion Science and Technology(Grant No.SKLEST-ZZ-21-18).
文摘The majority of the projectiles used in the hypersonic penetration study are solid flat-nosed cylindrical projectiles with a diameter of less than 20 mm.This study aims to fill the gap in the experimental and analytical study of the evolution of the nose shape of larger hollow projectiles under hypersonic penetration.In the hypersonic penetration test,eight ogive-nose AerMet100 steel projectiles with a diameter of 40 mm were launched to hit concrete targets with impact velocities that ranged from 1351 to 1877 m/s.Severe erosion of the projectiles was observed during high-speed penetration of heterogeneous targets,and apparent localized mushrooming occurred in the front nose of recovered projectiles.By examining the damage to projectiles,a linear relationship was found between the relative length reduction rate and the initial kinetic energy of projectiles in different penetration tests.Furthermore,microscopic analysis revealed the forming mechanism of the localized mushrooming phenomenon for eroding penetration,i.e.,material spall erosion abrasion mechanism,material flow and redistribution abrasion mechanism and localized radial upsetting deformation mechanism.Finally,a model of highspeed penetration that included erosion was established on the basis of a model of the evolution of the projectile nose that considers radial upsetting;the model was validated by test data from the literature and the present study.Depending upon the impact velocity,v0,the projectile nose may behave as undistorted,radially distorted or hemispherical.Due to the effects of abrasion of the projectile and enhancement of radial upsetting on the duration and amplitude of the secondary rising segment in the pulse shape of projectile deceleration,the predicted DOP had an upper limit.
基金National Natural Science Foundation of China under Grant No.61973037China Postdoctoral Science Foundation 2022M720419 to provide fund for conducting experiments。
文摘The identification of intercepted radio fuze modulation types is a prerequisite for decision-making in interference systems.However,the electromagnetic environment of modern battlefields is complex,and the signal-to-noise ratio(SNR)of such environments is usually low,which makes it difficult to implement accurate recognition of radio fuzes.To solve the above problem,a radio fuze automatic modulation recognition(AMR)method for low-SNR environments is proposed.First,an adaptive denoising algorithm based on data rearrangement and the two-dimensional(2D)fast Fourier transform(FFT)(DR2D)is used to reduce the noise of the intercepted radio fuze intermediate frequency(IF)signal.Then,the textural features of the denoised IF signal rearranged data matrix are extracted from the statistical indicator vectors of gray-level cooccurrence matrices(GLCMs),and support vector machines(SVMs)are used for classification.The DR2D-based adaptive denoising algorithm achieves an average correlation coefficient of more than 0.76 for ten fuze types under SNRs of-10 d B and above,which is higher than that of other typical algorithms.The trained SVM classification model achieves an average recognition accuracy of more than 96%on seven modulation types and recognition accuracies of more than 94%on each modulation type under SNRs of-12 d B and above,which represents a good AMR performance of radio fuzes under low SNRs.
基金Project supported by the National Natural Science Foundation of China(Grant No.51975240)the Open Fund of State Key Laboratory of Advanced Forming Technology and Equipment(Grant No.SKL2019006)。
文摘We simulate the gas-atomization process of a close-coupled annular nozzle for vacuum induction gas atomization at a three-dimensional scale.Moreover,the relationship between the simulated droplet type and experimentally metallic powder is established by comparing the morphology of droplets with powders.Herein,the primary atomization process is described by the volume-of-fluid(VOF)approach,whereas the prediction of powder diameter after secondary atomization is realized by the VOF-Lagrangian method.In addition,to completely reflect the breaking and deformation process of the metallic flow,we employ the VOF model to simulate the secondary atomization process of a single ellipsoidal droplet.The results show that the primary atomization process includes the formation of surface liquid film,appearance of serrated ligaments,and shredding of ligaments.Further,gas recirculation zone plays an important role in formation of the umbrella-shaped liquid film.The secondary atomization process is divided into droplet convergence and dispersion stages,and the predicted powder diameter is basically consistent with the experiment.In general,the four main powder shapes are formed by the interaction of five different typical droplets.
基金financially supported by the National Natural Science Foundation of China (No. 52275305)the Fundamental Research Funds for the Central Universities (No. FRF-IC-20-10)the China Postdoctoral Science Foundation (No. 2021M700378)
文摘We investigated the asymmetric tension-compression(T-C)behavior of ZA21 bars with bimodal and uniform structures through axial tension and compression tests.The results show that the yield strengths of bars having bimodal structure are 206.42 and 140.28 MPa under tension and compression,respectively,which are higher than those of bars having uniform structure with tensile and compressive yield strength of 183.71 and 102.86 MPa,respectively.Prismatic slip and extension twinning under tension and basal slip and extension twinning under compression dominate the yield behavior and induce the T-C asymmetry.However,due to the basal slip activated in fine grains under tension and the inhibition of extension twinning by fine grains under compression,the bimodal structure possesses a lower T-C asymmetry(0.68)compared to the uniform structure(0.56).Multiple extension twins occur during deformation,and the selection of twin variants depends on the Schmid factor of the six variants activated by parent grains.Furthermore,the strengthening effect of the bimodal structure depends on the grain size and the ratio of coarse and fine grains.
基金National Natural Science Foundation of China(Grant No.11872120).
文摘Taking CL-20(Hexanitrohexaazaisowurtzitane)-based aluminized explosives with high gurney energy as the research object, this research experimentally investigates the work capability of different aluminized explosive formulations when driving metal flyer plates in the denotation wave propagation direction.The research results showed that the formulations with 43 μm aluminum(Al) powder particles(The particle sizes of Al powder were in the range of 2~43 μm) exhibited the optimal performance in driving flyer plates along the denotation wave propagation direction. Compared to the formulations with Al powder 13 μm, the formulations with Al powder 2 μm delivered better performance in accelerating metal flyer plates in the early stage, which, however, turned to be poor in the later stage. The CL-20-based explosives containing 25% Al far under-performed those containing 15% Al. Based on the proposed quasi-isentropic hypothesis, relevant isentropy theories, and the functional relationship between detonation parameters and entropy as well as Al reaction degree, the characteristic lines of aluminized explosives in accelerating flyer plates were theoretically studied, a quasi-isentropic theoretical model for the aluminized explosive driving the flyer plate was built and the calculation methods for the variations of flyer plate velocity, Al reaction degree, and detonation product parameters with time and axial positions were developed. The theoretical model built is verified by the experimental results of the CL-20-based aluminized explosive driving flyer plate. It was found that the model built could accurately calculate the variations of flyer plate velocity and Al reaction degree over time. In addition, how physical parameters including detonation product pressure and temperature varied with time and axial positions was identified. The action time of the positive pressure after the detonation of aluminized explosives was found prolonged and the downtrend of the temperature was slowed down and even reversed to a slight r
基金financially supported by the National Science and Technology Major Project(J2019-Ⅲ-0014-0057)the National Natural Science Foundation of China(92041001)。
文摘Experimental analysis was conducted to study the impact of fuel-air mixing and dilution jet on the temperature distribution in a small gas turbine combustor using various optical diagnostic techniques.The strength and velocity of the swirler at the venturi exit were adjusted to modify the fuel-air mixture,which is presumed to dominate the heat release of the main combustion zone.Additionally,the dilution hole configuration,including the number and size of the holes,was varied to investigate the dilution effect on outlet temperature distribution.Various optical diagnostic techniques,such as particle image velocimetry,planar Mie scattering,and OH~*chemiluminescence,were used to measure the flow field,fuel spray distribution,and flame structure,respectively.A reduction in swirling strength led to a decrease in the average flow rate in the throat,which improved the structure and symmetry of the axial vortex system in the sleeve,enhanced the mixing of fuel and gas in the dome swirling air,and ultimately,improved the temperature uniformity of the heat release zone.Compared to larger and sparse dilution jets,smaller and dense dilution jets tended to generate hot spots shifted towards the radial middle area.
文摘The mathematical model of conical involute gears is developed based on the theory of gearing and the generating mechanism. Tooth contact analysis （TCA） is performed to examine the meshing and bearing contact of the conical involute gear pairs with intersected and crossed axes. In addition, the principal directions and curvatures of the gear surfaces are investigated and the contact ellipses of the mating tooth surfaces are also studied. Finally, the numerical illustrative examples are provided to demonstrate the computational results, test gears are made for tooth-bearing tests, and the conclusion is verified that the theory has the applicability.
基金supports from the National Natural Science Foundation of China(Grant Nos.51972089,51672064,and U1435206).
文摘The advance in communication technology has triggered worldwide concern on electromagnetic wave pollution.To cope with this challenge,exploring high-performance electromagnetic(EM)wave absorbing materials with dielectric and magnetic losses coupling is urgently required.Of the EM wave absorbers,transition metal diborides(TMB2)possess excellent dielectric loss capability.However,akin to other single dielectric materials,poor impedance match leads to inferior performance.High-entropy engineering is expected to be effective in tailoring the balance between dielectric and magnetic losses through compositional design.Herein,three HE TMB2 powders with nominal equimolar TM including HE TMB2-I(TM=Zr,Hf,Nb,Ta),HE TMB2-2(TM=Ti,Zr,Hf,Nb,Ta),and HE TMB2-3(TM=Cr,Zr,Hf,Nb,Ta)have been designed and prepared by one-step boro/carbothermal reduction.As a result of synergistic effects of strong attenuation capability and impedance match,HE TMB2-1 shows much improved performance with the optimal minimum reflection loss(RL_(min))of-59.6 dB(8.48 GHz,2.68 mm)and effective absorption bandwidth(EAB)of 7.6 GHz(2.3 mm).Most impressively,incorporating Cr in HE TMB2-3 greatly improves the impedance match over 1-18 GHz,thus achieving the RLmin of-56.2 dB(8.48 GHz,2.63 mm)and the EAB of 11.0 GHz(2.2 mm),which is superior to most other EM wave absorbing materials.This work reveals that constructing high-entropy compounds,especially by incorporating magnetic elements,is effectual in tailoring the impedance match for highly conductive compounds,i.e.,tuning electrical conductivity and boosting magnetic loss to realize highly efficient and broadband EM wave absorption with dielectric and magnetic coupling in single-phase materials.
基金the National Natural Science Foundation of China(Nos.62003023,32071407,52073138,52003018 and 52003019)Beijing Natural Science Foundation(No.7212204)Beijing Advanced Innovation Center for Biomedical Engineering and Beihang University.
文摘Recurrent oral ulcer is a painful oral mucosal disorder that affects 20%of the world’s population.The lack of a radical cure due to its unknown underlying cause calls for innovative symptomatic treatments.This work reports a hyaluronic acid-based dissolvablemicroneedle patch(ROUMNpatch,short for recurrent oral ulcer microneedle)loaded with dexamethasone acetate,vitamin C and tetracaine hydrochloride for the treatment of recurrent oral ulcers.The ROUMN patch shows enhancement in both the anti-inflammatory effect elicited by dexamethasone and the pro-proliferation effect of vitamin C.In vitro experiments show that ROUMN has a higher efficiency in suppressing lipopolysaccharide(LPS)-induced interleukin-6(IL-6)expression than dexamethasone alone.Cell proliferation and migrationwere also significantly promoted byROUMNcompared to vitamin C alone.The healing-promoting effect of ROUMN was also verified in vivo using an acetic acid-cauterized oral ulcer model in rats.ROUMN as a treatment accelerated the healing process of oral ulcers,shortening the total healing time to 5 days compared with the 7 days required by treatment using watermelon frost,a commonly used over-the-counter(OTC)drug for oral ulcers.The rapid dissolution of the hyaluronic acid-based microneedles and the superior healing-promoting effect of the drug combination could lead to a broad application prospect of the ROUMN patch in the treatment of recurrent oral ulcers.
