Two-dimensional(2D)transition metal chalcogenides(TMC)and their heterostructures are appealing as building blocks in a wide range of electronic and optoelectronic devices,particularly futuristic memristive and synapti...Two-dimensional(2D)transition metal chalcogenides(TMC)and their heterostructures are appealing as building blocks in a wide range of electronic and optoelectronic devices,particularly futuristic memristive and synaptic devices for brain-inspired neuromorphic computing systems.The distinct properties such as high durability,electrical and optical tunability,clean surface,flexibility,and LEGO-staking capability enable simple fabrication with high integration density,energy-efficient operation,and high scalability.This review provides a thorough examination of high-performance memristors based on 2D TMCs for neuromorphic computing applications,including the promise of 2D TMC materials and heterostructures,as well as the state-of-the-art demonstration of memristive devices.The challenges and future prospects for the development of these emerging materials and devices are also discussed.The purpose of this review is to provide an outlook on the fabrication and characterization of neuromorphic memristors based on 2D TMCs.展开更多
The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in orde...The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in order to provide ultimate wear resistance based on the laser-irradiation-induced inclusion of N_(2) gas during laser powder bed fusion.This is substantialized based on both the thermal diffusion-and chemical reactionbased metallurgy of the Mg_(2)Si–SiC/nitride hybrid composite.This study also proposes a functional platform for systematically modulating a functionally graded structure and modeling build-direction-dependent architectonics during additive manufacturing.This strategy enables the development of a compositional gradient from the center to the edge of each melt pool of the Mg_(2)Si–SiC/nitride hybrid composite.Consequently,the coefficient of friction of the hybrid composite exhibits a 309.3%decrease to–1.67 compared to–0.54 for the conventional nonreinforced Mg_(2)Si structure,while the tensile strength exhibits a 171.3%increase to 831.5 MPa compared to 485.3 MPa for the conventional structure.This outstanding mechanical behavior is due to the(1)the complementary and synergistic reinforcement effects of the SiC and nitride compounds,each of which possesses an intrinsically high hardness,and(2)the strong adhesion of these compounds to the Mg_(2)Si matrix despite their small sizes and low concentrations.展开更多
Individuals who are unable to walk independently spend most of the day in a wheelchair.This population is at high risk for developing pressure injuries caused by sitting.However,early diagnosis and prevention of these...Individuals who are unable to walk independently spend most of the day in a wheelchair.This population is at high risk for developing pressure injuries caused by sitting.However,early diagnosis and prevention of these injuries still remain challenging.Herein,we introduce battery-free,wireless,multimodal sensors and a movable system for continuous measurement of pressure,temperature,and hydration at skin interfaces.The device design includes a crack-activated pressure sensor with nanoscale encapsulations for enhanced sensitivity,a temperature sensor for measuring skin temperature,and a galvanic skin response sensor for measuring skin hydration levels.The movable system enables power harvesting,and data communication to multiple wireless devices mounted at skin-cushion interfaces of wheelchair users over full body coverage.Experimental evaluations and numerical simulations of the devices,together with clinical trials for wheelchair patients,demonstrate the feasibility and stability of the sensor system for preventing pressure injuries caused by sitting.展开更多
The exfoliation of bulk graphitic carbon nitride(g-C_(3)N_(4))into monolayer has been intensively studied to induce maximum sur-face area for fundamental studies,but ended in failure to realize chemi-cally and physica...The exfoliation of bulk graphitic carbon nitride(g-C_(3)N_(4))into monolayer has been intensively studied to induce maximum sur-face area for fundamental studies,but ended in failure to realize chemi-cally and physically well-defined monolayer of g-C_(3)N_(4)mostly due to the difficulty in reducing the layer thickness down to an atomic level.It has,therefore,remained as a challenging issue in two-dimensional(2D)chemistry and physics communities.In this study,an“atomic monolayer of g-C_(3)N_(4)with perfect two-dimensional limit”was successfully prepared by the chemically well-defined two-step routes.The atomically resolved monolayer of g-C_(3)N_(4)was also confirmed by spectroscopic and micro-scopic analyses.In addition,the experimental Cs-HRTEM image was collected,for the first time,which was in excellent agreement with the theoretically simulated;the evidence of monolayer of g-C_(3)N_(4)in the perfect 2D limit becomes now clear from the HRTEM image of orderly hexagonal symmetry with a cavity formed by encirclement of three adjacent heptazine units.Compared to bulk g-C_(3)N_(4),the present g-C_(3)N_(4)monolayer showed significantly higher photocatalytic gen-eration of H2O2 and H2,and electrocatalytic oxygen reduction reaction.In addition,its photocatalytic efficiency for H2O2 production was found to be the best for any known g-C_(3)N_(4)nanomaterials,underscoring the remarkable advantage of monolayer formation in optimizing the catalyst performance of g-C_(3)N_(4).展开更多
Recently,artificial synapses involving an electrochemical reaction of Li-ion have been attributed to have remarkable synaptic properties.Three-terminal synaptic transistors utilizing Li-ion intercalation exhibits reli...Recently,artificial synapses involving an electrochemical reaction of Li-ion have been attributed to have remarkable synaptic properties.Three-terminal synaptic transistors utilizing Li-ion intercalation exhibits reliable synaptic characteristics by exploiting the advantage of nondistributed weight updates owing to stable ion migrations.However,the three-terminal configurations with large and complex structures impede the crossbar array implementation required for hardware neuromorphic systems.Meanwhile,achieving adequate synaptic performances through effective Li-ion intercalation in vertical two-terminal synaptic devices for array integration remains challenging.Here,two-terminal Au/LixCoO_(2)/Pt artificial synapses are proposed with the potential for practical implementation of hardware neural networks.The Au/LixCoO_(2)/Pt devices demonstrated extraordinary neuromorphic behaviors based on a progressive dearth of Li in LixCoO_(2)films.The intercalation and deintercalation of Li-ion inside the films are precisely controlled over the weight control spike,resulting in improved weight control functionality.Various types of synaptic plasticity were imitated and assessed in terms of key factors such as nonlinearity,symmetricity,and dynamic range.Notably,the LixCoO_(2)-based neuromorphic system outperformed three-terminal synaptic transistors in simulations of convolutional neural networks and multilayer perceptrons due to the high linearity and low programming error.These impressive performances suggest the vertical two-terminal Au/LixCoO_(2)/Pt artificial synapses as promising candidates for hardware neural networks.展开更多
Micro-light-emitting diodes(μLEDs)have gained significant interest as an activation source for gas sensors owing to their advantages,including room temperature operation and low power consumption.However,despite thes...Micro-light-emitting diodes(μLEDs)have gained significant interest as an activation source for gas sensors owing to their advantages,including room temperature operation and low power consumption.However,despite these benefits,challenges still exist such as a limited range of detectable gases and slow response.In this study,we present a blueμLED-integrated light-activated gas sensor array based on SnO_(2)nanoparticles(NPs)that exhibit excellent sensitivity,tunable selectivity,and rapid detection with micro-watt level power consumption.The optimal power forμLED is observed at the highest gas response,supported by finite-difference time-domain simulation.Additionally,we first report the visible light-activated selective detection of reducing gases using noble metal-decorated SnO_(2)NPs.The noble metals induce catalytic interaction with reducing gases,clearly distinguishing NH3,H2,and C2H5OH.Real-time gas monitoring based on a fully hardwareimplemented light-activated sensing array was demonstrated,opening up new avenues for advancements in light-activated electronic nose technologies.展开更多
Metal-organic frameworks(MOFs)have been extensively considered as one of the most promising types of porous and crystalline organic-inorganic materials,thanks to their large specific surface area,high porosity,tailora...Metal-organic frameworks(MOFs)have been extensively considered as one of the most promising types of porous and crystalline organic-inorganic materials,thanks to their large specific surface area,high porosity,tailorable structures and compositions,diverse functionalities,and well-controlled pore/size distribution.However,most developed MOFs are in powder forms,which still have some technical challenges,including abrasion,dustiness,low packing densities,clogging,mass/heat transfer limitation,environmental pollution,and mechanical instability during the packing process,that restrict their applicability in industrial applications.Therefore,in recent years,attention has focused on techniques to convert MOF powders into macroscopic materials like beads,membranes,monoliths,gel/sponges,and nanofibers to overcome these challenges.Three-dimensional(3D)printing technology has achieved much interest because it can produce many high-resolution macroscopic frameworks with complex shapes and geometries from digital models.Therefore,this review summarizes the combination of different 3D printing strategies with MOFs and MOF-based materials for fabricating 3D-printed MOF monoliths and their environmental applications,emphasizing water treatment and gas adsorption/separation applications.Herein,the various strategies for the fabrication of 3D-printed MOF monoliths,such as direct ink writing,seed-assisted in-situ growth,coordination replication from solid precursors,matrix incorporation,selective laser sintering,and digital light processing,are described with the relevant examples.Finally,future directions and challenges of 3D-printed MOF monoliths are also presented to better plan future trajectories in the shaping of MOF materials with improved control over the structure,composition,and textural properties of 3D-printed MOF monoliths.展开更多
Porous 2D materials with high conductivity and large surface area have been proposed for potential electromagnetic interference(EMI)shielding materials in future mobility and wearable applications to prevent signal no...Porous 2D materials with high conductivity and large surface area have been proposed for potential electromagnetic interference(EMI)shielding materials in future mobility and wearable applications to prevent signal noise,transmission inaccuracy,system malfunction,and health hazards.Here,we report on the synthesis of lightweight and flexible flash-induced porous graphene(FPG)with excellent EMI shielding performance.The broad spectrum of pulsed flashlight induces photo-chemical and photo-thermal reactions in polyimide films,forming 5×10 cm^(2)-size porous graphene with a hollow pillar structure in a few milliseconds.The resulting material demonstrated low density(0.0354 g cm^(−3))and outstanding absolute EMI shielding effectiveness of 1.12×10^(5) dB cm^(2) g^(−1).The FPG was characterized via thorough material analyses,and its mechanical durability and flexibility were confirmed by a bending cycle test.Finally,the FPG was utilized in drone and wearable applications,showing effective EMI shielding performance for internal/external EMI in a drone radar system and reducing the specific absorption rate in the human body.展开更多
Polymer solar cells(PSCs)with high power conversion efficiency(PCE)and environment-friendly fabrication are the main requirements enabling their production in industrial scale.While the use of non-halogenated solvent ...Polymer solar cells(PSCs)with high power conversion efficiency(PCE)and environment-friendly fabrication are the main requirements enabling their production in industrial scale.While the use of non-halogenated solvent processing is inevitable for the PSC fabrication,it significantly reduces the processability of polymer donors(PDS)and small-molecule acceptors(SMAs).This often results in unoptimized blend morphology and limits the device performance.To address this issue,hydrophilic oligoethylene glycol(OEG)side-chains are introduced into a PD(2EG)to enhance the molecular compatibility between the PD and L8-BO SMA.The 2EG PD induces higher crystallinity and alleviates phase separation with the SMA compared to the reference PD(PM7)with hydrocarbon side-chains.Consequently,the 2EG-based PSCs exhibit a higher PCE(15.8%)than the PM7-based PSCs(PCE=14.4%)in the ortho-xylene based processing.Importantly,benefitted from the reduced phase separation and increased crystallinity of 2EG PDS,the 2EG-based PSCs show enhanced thermal stability(84%of initial PCE after 120 h heating)compared to that of the PM7-based PSCs(60%of initial PCE after 120 h heating).This study demonstrates the potential of OEG side-chain-incorporated materials in developing efficient,stable,and eco-friendly PSCs.展开更多
Artificial defect engineering in transition metal oxides is of important terms for numerous applications.In the present work,we proposed an in-situ gas reduction strategy to introduce ordered defects into titanium nio...Artificial defect engineering in transition metal oxides is of important terms for numerous applications.In the present work,we proposed an in-situ gas reduction strategy to introduce ordered defects into titanium niobium oxide embedding on vapor grew carbon fibers(Ti_(2)Nb_(10)O_(29-x)@VGCFs).High-resolution transmission electron microscopy(HRTEM)and fast Fourier transform(FFT)simulation indicate that the ordered oxygen defects locate at interval layers,which leads to a new superstructure in Ti_(2)Nb_(10)O_(29).The ordered defects could provide extra active sites for lithium-ion storage and modulate ionic migration,resulting an enhanced pseudocapacitive performance.In addition,the excellent structural stability of the superstructure was proved by in-situ HRTEM under a harsh electrochemical process.Our work provides a directly observation of orderly defective superstructure in transition metal oxide,and its functionality on electrochemistry was revealed.展开更多
Photoelectrochemical(PEC)H_(2)O_(2)production through water oxidation reaction(WOR)is a promising strategy,however,designing highly efficient and selective photoanode materials remains challenging due to competitive r...Photoelectrochemical(PEC)H_(2)O_(2)production through water oxidation reaction(WOR)is a promising strategy,however,designing highly efficient and selective photoanode materials remains challenging due to competitive reaction pathways.Here,for highly enhanced PEC H_(2)O_(2)production,we present a conformal amorphous titanyl phosphate(a-TP)overlayer on nanoparticulate TiO_(2)surfaces,achieved via lysozyme-molded in-situ surface reforming.The a-TP overlayer modulates surface adsorption energies for reaction intermediates,favoring WOR for H_(2)O_(2)production over the competing O_(2)evolution reaction.Our density functional theory calculations reveal that a-TP/TiO_(2)exhibits a substantial energy uphill for the O·*formation pathway,which disfavors O_(2)evolution but promotes H_(2)O_(2)production.Additionally,the a-TP overlayer strengthens the built-in electric field,resulting in favorable kinetics.Consequently,a-TP/TiO_(2)exhibits 3.7-fold higher Faraday efficiency(FE)of 63%at 1.76 V vs.reversible hydrogen electrode(RHE)under 1 sun illumination,compared to bare TiO_(2)(17%),representing the highest FE among TiO_(2)-based WOR H_(2)O_(2)production systems.Employing the a-TP overlayer constitutes a promising strategy for controlling reaction pathways and achieving efficient solar-to-chemical energy conversion.展开更多
The development of new heterostructures with high photoactivity is a breakthrough for the limitation of solar-driven water splitting.Here,we first introduce indium oxide(In_(2)O_(3))nanorods(NRs)as a novel electron tr...The development of new heterostructures with high photoactivity is a breakthrough for the limitation of solar-driven water splitting.Here,we first introduce indium oxide(In_(2)O_(3))nanorods(NRs)as a novel electron transport layer for bismuth vanadate(BiVO_(4))with a short charge diffusion length.In_(2)O_(3)NRs reinforce the electron transport and hole blocking of BiVO_(4),surpassing the state-of-the-art photoelectrochemical performances of BiVO_(4)-based photoanodes.Also,a tannin-nickel-iron complex(TANF)is used as an oxygen evolution catalyst to speed up the reaction kinetics.The final TANF/BiVO_(4)/In_(2)O_(3)NR photoanode generates photocurrent densities of 7.1 mAcm^(−2) in sulfite oxidation and 4.2 mA cm^(−2) in water oxidation at 1.23 V versus the reversible hydrogen electrode.Furthermore,the“artificial leaf,”which is a tandem cell with a perovskite/silicon solar cell,shows a solar-to-hydrogen conversion efficiency of 6.2%for unbiased solar water splitting.We reveal significant advances in the photoactivity of TANF/BiVO_(4)/In_(2)O_(3)NRs from the tailored nanostructure and band structure for charge dynamics.展开更多
Although bismuth vanadate(BiVO4)has been promising as photoanode material for photoelectrochemical water splitting,its charge recombination issue by short charge diffusion length has led to various studies about heter...Although bismuth vanadate(BiVO4)has been promising as photoanode material for photoelectrochemical water splitting,its charge recombination issue by short charge diffusion length has led to various studies about heterostructure photoanodes.As a hole blocking layer of BiVO4,titanium dioxide(TiO_(2)) has been considered unsuitable because of its relatively positive valence band edge and low electrical conductivity.Herein,a crystal facet engineering of TiO_(2) nanostructures is proposed to control band structures for the hole blocking layer of BiVO4 nanodots.We design two types of TiO_(2) nanostructures,which are nanorods(NRs)and nanoflowers(NFs)with different(001)and(110)crystal facets,respectively,and fabricate BiVO4/TiO_(2) heterostructure photoanodes.The BiVO4/TiO_(2) NFs showed 4.8 times higher photocurrent density than the BiVO4/TiO_(2) NRs.Transient decay time analysis and time-resolved photoluminescence reveal the enhancement is attributed to the reduced charge recombination,which is originated from the formation of type II band alignment between BiVO4 nanodots and TiO_(2) NFs.This work provides not only new insights into the interplay between crystal facets and band structures but also important steps for the design of highly efficient photoelectrodes.展开更多
Monitoring taste-inducing ions and molecules continuously in liquids or solutions is of great considerable matter for the realization of the electronic tongue(E-tongue).Particularly from the five major tastes,the high...Monitoring taste-inducing ions and molecules continuously in liquids or solutions is of great considerable matter for the realization of the electronic tongue(E-tongue).Particularly from the five major tastes,the highly selective,sensitive detection of Na^(+)in real-time is prioritized.Prioritization is due to the saltiness of food is the key ingredient in most meals.Nevertheless,existing Na^(+)detecting devices have relatively low performances of selectivity,sensitivity,and lack of on–off functions.Additionally,conventional devices significantly deteriorate in capac-ity due to repetitive usage or lifetime shortage by degradation of the sensing mate-rial.Herein,a graphene-based channel was rationally designed by the facile decoration of Calix[4]arene and Nafion to address this issue.They act as a receptor and a molecular sieve,respectively,to enhance selectivity and sensitivity and elon-gate the life expectancy of the device.This device was merged with a microfluidic channel to control the injection and withdrawal of solutions to fulfill dynamic on–off functions.The fabricated device has highly selective,sensitive Na^(+)detection properties compared to other 10 molecule/ionic species.Dynamic on–off functions of the device were available,also possesses a long lifespan of at least 220 days.Additionally,it can precisely discriminate real beverages containing Na^(+),which can be observed by principal component analysis plot.These features offer the possibility of ascending to a platform for E-tongues in near future.展开更多
Lead sulfide(PbS),a typical functional semiconductor material,has attracted serious attention due to its great potential in optoelectronics applications.However,controllable growth of PbS single-crystal film still rem...Lead sulfide(PbS),a typical functional semiconductor material,has attracted serious attention due to its great potential in optoelectronics applications.However,controllable growth of PbS single-crystal film still remains a great challenge.Here,we report heteroepitaxial growth of large-scale highly crystalline PbS films on alkali salt(NaCl and KCl)substrates via chemical vapor deposition(CVD).Structural characterizations demonstrate that the as-grown PbS films exhibit an atomically sharp interface with the underlying substrates.The epitaxial relationships between the epilayers and substrates were determined to be PbS(100)//NaCl(100)or KCl(100),PbS[010]//NaCl[010]or KCl[010].Owing to the high solubility of alkali salt,the epitaxial PbS films can be rapidly released from the underlying substrates and transferred to other substrates of interest while maintaining good integrity and crystallinity,the process of which is particularly attractive in the fields of electronics and optoelectronics.Furthermore,photodetectors based on the transferred PbS films were fabricated,exhibiting a high photoresponsivity of 7.5 A/W,a detectivity of 1.44×10^(12)Jones,and a rapid response time of approximately 0.25 s.This work sheds light on the batch production,green transfer,and optoelectronic application of PbS films.展开更多
Epitaxially grown III-nitride alloys are tightly bonded materials with mixed covalent-ionic bonds.This tight bonding presents tremendous challenges in developing III-nitride membranes,even though semiconductor membran...Epitaxially grown III-nitride alloys are tightly bonded materials with mixed covalent-ionic bonds.This tight bonding presents tremendous challenges in developing III-nitride membranes,even though semiconductor membranes can provide numerous advantages by removing thick,inflexible,and costly substrates.Herein,cavities with various sizes were introduced by overgrowing target layers,such as undoped GaN and green LEDs,on nanoporous templates prepared by electrochemical etching of n-type GaN.The large primary interfacial toughness was effectively reduced according to the design of the cavity density,and the overgrown target layers were then conveniently exfoliated by engineering tensile-stressed Ni layers.The resulting III-nitride membranes maintained high crystal quality even after exfoliation due to the use of GaN-based nanoporous templates with the same lattice constant.The microcavity-assisted crack propagation process developed for the current III-nitride membranes forms a universal process for developing various kinds of large-scale and high-quality semiconductor membranes.展开更多
Rationally designed hierarchical structures and heteroatomic doping of carbon are effective strategies to enhance the stability and electrical conductivity of materials.Herein,SnSe_(2)flakes were generated in the doub...Rationally designed hierarchical structures and heteroatomic doping of carbon are effective strategies to enhance the stability and electrical conductivity of materials.Herein,SnSe_(2)flakes were generated in the double-walled hollow carbon spheres(DWHCSs),in which N and Se atoms were doped in the carbon walls,to construct SnSe_(2)@N,Se-DWHCSs by confined growth and in-situ derivatization.The N and Sedoped DWHCSs can effectively limit the size increase of SnSe_(2),promote ion diffusion kinetics,and buffer volume expansion,which can be proved by electron microscope observation and density functional theory calculation.Consequently,the SnSe_(2)@N,Se-DWHCSs as an anode material for sodium ion batteries(SIBs)demonstrated a distinguished reversible capacity of 322.8 mAh g^(-1)at 5 A g^(-1)after 1000 cycles and a superior rate ability of 235.3 m Ah g^(-1)at an ultrahigh rate of 15 A g^(-1).Furthermore,the structure evolution and electrochemical reaction processes of SnSe2@N,Se-DWHCSs in SIBs were analyzed by exsitu methods,which confirmed the consecutive hybrid mechanism and the phase transition process.展开更多
We examined a new method for visualization of the primo vascular system in the rat brain involving lateral ventricle injection of trypan blue. Results showed that the primo vascular system in the lateral ventricles an...We examined a new method for visualization of the primo vascular system in the rat brain involving lateral ventricle injection of trypan blue. Results showed that the primo vascular system in the lateral ventricles and arachnoid mater of the brain were preferentially stained relative to blood vessels and fascia. The primo-vessels along blood vessels in the brain were clearly exhibited. In addition, the primo vascular system was evident between the fourth ventricle and the quadrigeminal cistern. Our experimental findings indicate that this new technique of lateral ventricle injection of trypan blue can visualize the primo vascular system in lateral ventricles and arachnoid mater of rats in situ.展开更多
The original version of this article,unfortunately,contained some mistakes and unintentional wrong description of Fig.6 and the caption of Figs.9,10.The correct version of Fig.6 is below.The mentioned figure name for ...The original version of this article,unfortunately,contained some mistakes and unintentional wrong description of Fig.6 and the caption of Figs.9,10.The correct version of Fig.6 is below.The mentioned figure name for the Fig.6 on the manuscript should be updated.In 2D vdW synaptic devices,the length of the tunneling barrier can be increased or decreased on the trapped or detrapped electrons.Kumar et al.reported memristive and neuromorphic devices composed of vertically grown WS2 layer and ZnO(Fig.6e)[149].The interlayer separation between WS2 and ZnO layers serves as an effective porous medium allowing the ZnO to grow with defects.The interfacial region of ZnO,the very contiguous to WS2 layer.展开更多
Developing sustainable and clean energy technology is critial to address the current energy and environmental crisis.As an energy carrier,hydrogen has been getting attention due to its abundance,high energy density,an...Developing sustainable and clean energy technology is critial to address the current energy and environmental crisis.As an energy carrier,hydrogen has been getting attention due to its abundance,high energy density,and zero carbon emission.Due to the difficulty of hydrogen storage and transport,the electro-oxidation of ammonia shows great potential for renewable energy since it satisfies both energy supply and environmental protection as a carbon-free fuel with high hydrogen content.However,ammonia electro-oxidation is a sluggish reaction and shows low durability.Understanding the complicated mechanism and intermediates is conducive to developing efficient electrocatalysts with high catalytic activity and durability.This review begins with the ammonia oxidation technologies and their principles.The two typical mechanisms for ammonia electro-oxidation,Oswin-Salomon mechanism and Gerischer-Mauerer mechanism,are discussed,and attention to the poisoning species is included.Then,the electrocatalysts for ammonia reaction are classified into Pt-based catalysts and non-noble metal-based catalysts,and their performances are reviewed with various strategies.Based on the progress on the electrochemical ammonia oxidation catalysts,the challenges and future insight on ammonia oxidation reaction are discussed and proposed.展开更多
基金supported by the Characterization platform for advanced materials funded by the Korea Research Institute of Standards and Science(KRISS-2021-GP2021-0011)supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government MSIT(2021M3D1A20396541).
文摘Two-dimensional(2D)transition metal chalcogenides(TMC)and their heterostructures are appealing as building blocks in a wide range of electronic and optoelectronic devices,particularly futuristic memristive and synaptic devices for brain-inspired neuromorphic computing systems.The distinct properties such as high durability,electrical and optical tunability,clean surface,flexibility,and LEGO-staking capability enable simple fabrication with high integration density,energy-efficient operation,and high scalability.This review provides a thorough examination of high-performance memristors based on 2D TMCs for neuromorphic computing applications,including the promise of 2D TMC materials and heterostructures,as well as the state-of-the-art demonstration of memristive devices.The challenges and future prospects for the development of these emerging materials and devices are also discussed.The purpose of this review is to provide an outlook on the fabrication and characterization of neuromorphic memristors based on 2D TMCs.
基金supported by the Learning & Academic Research Institution for Master’s and Ph.D. Students and Postdocs (LAMP) Program of the National Research Foundation of Korea (NRF) grant funded by the Ministry of Education (No. RS-2023-00285353)supported by the National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIP) (NRF-2021R1A2C3006662, NRF-2022R1A5A1030054, and 2021R1A2C1091301)+3 种基金the support from Natural Sciences and Engineering Research Council of Canada (NSERC)Canada Foundation for Innovation (CFI)Atlantic Canada Opportunities Agency (ACOA)the New Brunswick Innovation Foundation (NBIF)
文摘The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in order to provide ultimate wear resistance based on the laser-irradiation-induced inclusion of N_(2) gas during laser powder bed fusion.This is substantialized based on both the thermal diffusion-and chemical reactionbased metallurgy of the Mg_(2)Si–SiC/nitride hybrid composite.This study also proposes a functional platform for systematically modulating a functionally graded structure and modeling build-direction-dependent architectonics during additive manufacturing.This strategy enables the development of a compositional gradient from the center to the edge of each melt pool of the Mg_(2)Si–SiC/nitride hybrid composite.Consequently,the coefficient of friction of the hybrid composite exhibits a 309.3%decrease to–1.67 compared to–0.54 for the conventional nonreinforced Mg_(2)Si structure,while the tensile strength exhibits a 171.3%increase to 831.5 MPa compared to 485.3 MPa for the conventional structure.This outstanding mechanical behavior is due to the(1)the complementary and synergistic reinforcement effects of the SiC and nitride compounds,each of which possesses an intrinsically high hardness,and(2)the strong adhesion of these compounds to the Mg_(2)Si matrix despite their small sizes and low concentrations.
基金supported by the Technology Innovation Program(00144157,Development of Heterogeneous Multi-Sensor Micro-System Platform)funded By the Ministry of Trade,Industry&Energy(MOTIE,korea)and the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(no.2021R1A2C3008742)supported by the MSIT(Ministry of Science and ICT),Korea,under the Grand Information Technology Research Center support program(IITP-2022-2016-0-00318)supervised by the IITP(Institute for Information&communications Technology Planning&Evaluation)Z.X.acknowledges the support from the National Natural Science Foundation of China(Grant No.12072057).
文摘Individuals who are unable to walk independently spend most of the day in a wheelchair.This population is at high risk for developing pressure injuries caused by sitting.However,early diagnosis and prevention of these injuries still remain challenging.Herein,we introduce battery-free,wireless,multimodal sensors and a movable system for continuous measurement of pressure,temperature,and hydration at skin interfaces.The device design includes a crack-activated pressure sensor with nanoscale encapsulations for enhanced sensitivity,a temperature sensor for measuring skin temperature,and a galvanic skin response sensor for measuring skin hydration levels.The movable system enables power harvesting,and data communication to multiple wireless devices mounted at skin-cushion interfaces of wheelchair users over full body coverage.Experimental evaluations and numerical simulations of the devices,together with clinical trials for wheelchair patients,demonstrate the feasibility and stability of the sensor system for preventing pressure injuries caused by sitting.
基金supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(No.2020R1I1A1A01072161)and under the framework of the International Cooperation Program managed by NRF(No.2017K2A9A2A10013104)supported by the NRF grant funded by the Korea government(MSIP)(No.NRF-2020R1A2C3008671).
文摘The exfoliation of bulk graphitic carbon nitride(g-C_(3)N_(4))into monolayer has been intensively studied to induce maximum sur-face area for fundamental studies,but ended in failure to realize chemi-cally and physically well-defined monolayer of g-C_(3)N_(4)mostly due to the difficulty in reducing the layer thickness down to an atomic level.It has,therefore,remained as a challenging issue in two-dimensional(2D)chemistry and physics communities.In this study,an“atomic monolayer of g-C_(3)N_(4)with perfect two-dimensional limit”was successfully prepared by the chemically well-defined two-step routes.The atomically resolved monolayer of g-C_(3)N_(4)was also confirmed by spectroscopic and micro-scopic analyses.In addition,the experimental Cs-HRTEM image was collected,for the first time,which was in excellent agreement with the theoretically simulated;the evidence of monolayer of g-C_(3)N_(4)in the perfect 2D limit becomes now clear from the HRTEM image of orderly hexagonal symmetry with a cavity formed by encirclement of three adjacent heptazine units.Compared to bulk g-C_(3)N_(4),the present g-C_(3)N_(4)monolayer showed significantly higher photocatalytic gen-eration of H2O2 and H2,and electrocatalytic oxygen reduction reaction.In addition,its photocatalytic efficiency for H2O2 production was found to be the best for any known g-C_(3)N_(4)nanomaterials,underscoring the remarkable advantage of monolayer formation in optimizing the catalyst performance of g-C_(3)N_(4).
基金financially supported by National R&D Program(2018M3D1A1058793,2021M3H4A3A02086430)through NRF(National Research Foundation of Korea)funded by the Ministry of Science and ICTsupported by SAIT,Samsung Electronics Co.,Ltd。
文摘Recently,artificial synapses involving an electrochemical reaction of Li-ion have been attributed to have remarkable synaptic properties.Three-terminal synaptic transistors utilizing Li-ion intercalation exhibits reliable synaptic characteristics by exploiting the advantage of nondistributed weight updates owing to stable ion migrations.However,the three-terminal configurations with large and complex structures impede the crossbar array implementation required for hardware neuromorphic systems.Meanwhile,achieving adequate synaptic performances through effective Li-ion intercalation in vertical two-terminal synaptic devices for array integration remains challenging.Here,two-terminal Au/LixCoO_(2)/Pt artificial synapses are proposed with the potential for practical implementation of hardware neural networks.The Au/LixCoO_(2)/Pt devices demonstrated extraordinary neuromorphic behaviors based on a progressive dearth of Li in LixCoO_(2)films.The intercalation and deintercalation of Li-ion inside the films are precisely controlled over the weight control spike,resulting in improved weight control functionality.Various types of synaptic plasticity were imitated and assessed in terms of key factors such as nonlinearity,symmetricity,and dynamic range.Notably,the LixCoO_(2)-based neuromorphic system outperformed three-terminal synaptic transistors in simulations of convolutional neural networks and multilayer perceptrons due to the high linearity and low programming error.These impressive performances suggest the vertical two-terminal Au/LixCoO_(2)/Pt artificial synapses as promising candidates for hardware neural networks.
基金supported by the Nano&Material Technology Development Program through the National Research Foundation of Korea(NRF)funded by Ministry of Science and ICT(RS-2024-00405016)supported by“Cooperative Research Program for Agriculture Science and Technology Development(Project No.PJ01706703)”Rural Development Administration,Republic of Korea.The Inter-University Semiconductor Research Center and Institute of Engineering Research at Seoul National University provided research facilities for this work.
文摘Micro-light-emitting diodes(μLEDs)have gained significant interest as an activation source for gas sensors owing to their advantages,including room temperature operation and low power consumption.However,despite these benefits,challenges still exist such as a limited range of detectable gases and slow response.In this study,we present a blueμLED-integrated light-activated gas sensor array based on SnO_(2)nanoparticles(NPs)that exhibit excellent sensitivity,tunable selectivity,and rapid detection with micro-watt level power consumption.The optimal power forμLED is observed at the highest gas response,supported by finite-difference time-domain simulation.Additionally,we first report the visible light-activated selective detection of reducing gases using noble metal-decorated SnO_(2)NPs.The noble metals induce catalytic interaction with reducing gases,clearly distinguishing NH3,H2,and C2H5OH.Real-time gas monitoring based on a fully hardwareimplemented light-activated sensing array was demonstrated,opening up new avenues for advancements in light-activated electronic nose technologies.
文摘Metal-organic frameworks(MOFs)have been extensively considered as one of the most promising types of porous and crystalline organic-inorganic materials,thanks to their large specific surface area,high porosity,tailorable structures and compositions,diverse functionalities,and well-controlled pore/size distribution.However,most developed MOFs are in powder forms,which still have some technical challenges,including abrasion,dustiness,low packing densities,clogging,mass/heat transfer limitation,environmental pollution,and mechanical instability during the packing process,that restrict their applicability in industrial applications.Therefore,in recent years,attention has focused on techniques to convert MOF powders into macroscopic materials like beads,membranes,monoliths,gel/sponges,and nanofibers to overcome these challenges.Three-dimensional(3D)printing technology has achieved much interest because it can produce many high-resolution macroscopic frameworks with complex shapes and geometries from digital models.Therefore,this review summarizes the combination of different 3D printing strategies with MOFs and MOF-based materials for fabricating 3D-printed MOF monoliths and their environmental applications,emphasizing water treatment and gas adsorption/separation applications.Herein,the various strategies for the fabrication of 3D-printed MOF monoliths,such as direct ink writing,seed-assisted in-situ growth,coordination replication from solid precursors,matrix incorporation,selective laser sintering,and digital light processing,are described with the relevant examples.Finally,future directions and challenges of 3D-printed MOF monoliths are also presented to better plan future trajectories in the shaping of MOF materials with improved control over the structure,composition,and textural properties of 3D-printed MOF monoliths.
基金supported by the Technology Development Program of MSS (S3207363)supported by the Wearable Platform Materials Technology Center (WMC) (NRF-2022R1A5A6000846)+3 种基金National Research Foundation of Korea (NRF) grant funded by the Korea government (MSITMinistry of Science and ICT) (No. NRF-2020M3C1B8081519)supported by the MSIT, Korea, under the ITRC (Information Technology Research Center) support program (IITP-2020-0-01778)supervised by the IITP (Institute of Information & Communications Technology Planning & Evaluation).
文摘Porous 2D materials with high conductivity and large surface area have been proposed for potential electromagnetic interference(EMI)shielding materials in future mobility and wearable applications to prevent signal noise,transmission inaccuracy,system malfunction,and health hazards.Here,we report on the synthesis of lightweight and flexible flash-induced porous graphene(FPG)with excellent EMI shielding performance.The broad spectrum of pulsed flashlight induces photo-chemical and photo-thermal reactions in polyimide films,forming 5×10 cm^(2)-size porous graphene with a hollow pillar structure in a few milliseconds.The resulting material demonstrated low density(0.0354 g cm^(−3))and outstanding absolute EMI shielding effectiveness of 1.12×10^(5) dB cm^(2) g^(−1).The FPG was characterized via thorough material analyses,and its mechanical durability and flexibility were confirmed by a bending cycle test.Finally,the FPG was utilized in drone and wearable applications,showing effective EMI shielding performance for internal/external EMI in a drone radar system and reducing the specific absorption rate in the human body.
基金Korea Institute of Energy Technology Evaluation and Planning(KETEP)grant(20214000000650)National Research Foundation(NRF)grant(2022R1A2B5B03001761)funded by the Korea government.
文摘Polymer solar cells(PSCs)with high power conversion efficiency(PCE)and environment-friendly fabrication are the main requirements enabling their production in industrial scale.While the use of non-halogenated solvent processing is inevitable for the PSC fabrication,it significantly reduces the processability of polymer donors(PDS)and small-molecule acceptors(SMAs).This often results in unoptimized blend morphology and limits the device performance.To address this issue,hydrophilic oligoethylene glycol(OEG)side-chains are introduced into a PD(2EG)to enhance the molecular compatibility between the PD and L8-BO SMA.The 2EG PD induces higher crystallinity and alleviates phase separation with the SMA compared to the reference PD(PM7)with hydrocarbon side-chains.Consequently,the 2EG-based PSCs exhibit a higher PCE(15.8%)than the PM7-based PSCs(PCE=14.4%)in the ortho-xylene based processing.Importantly,benefitted from the reduced phase separation and increased crystallinity of 2EG PDS,the 2EG-based PSCs show enhanced thermal stability(84%of initial PCE after 120 h heating)compared to that of the PM7-based PSCs(60%of initial PCE after 120 h heating).This study demonstrates the potential of OEG side-chain-incorporated materials in developing efficient,stable,and eco-friendly PSCs.
基金supported by the National Key R&D Program of China(No.2018YFB1304902)the National Natural Science Foundation of China(Nos.21975025,21203008,and 11904372)the Beijing Natural Science Foundation(No.2172051)。
文摘Artificial defect engineering in transition metal oxides is of important terms for numerous applications.In the present work,we proposed an in-situ gas reduction strategy to introduce ordered defects into titanium niobium oxide embedding on vapor grew carbon fibers(Ti_(2)Nb_(10)O_(29-x)@VGCFs).High-resolution transmission electron microscopy(HRTEM)and fast Fourier transform(FFT)simulation indicate that the ordered oxygen defects locate at interval layers,which leads to a new superstructure in Ti_(2)Nb_(10)O_(29).The ordered defects could provide extra active sites for lithium-ion storage and modulate ionic migration,resulting an enhanced pseudocapacitive performance.In addition,the excellent structural stability of the superstructure was proved by in-situ HRTEM under a harsh electrochemical process.Our work provides a directly observation of orderly defective superstructure in transition metal oxide,and its functionality on electrochemistry was revealed.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government,Ministry of Science and ICT(MSIT)(NRF-2020M3D1A2102837)the Korea Institute of Energy Technology Evaluation and Planning(KETEP)grant funded by the Korea government(MOTIE)(20214000000500,training program of CCUS for the green growth)。
文摘Photoelectrochemical(PEC)H_(2)O_(2)production through water oxidation reaction(WOR)is a promising strategy,however,designing highly efficient and selective photoanode materials remains challenging due to competitive reaction pathways.Here,for highly enhanced PEC H_(2)O_(2)production,we present a conformal amorphous titanyl phosphate(a-TP)overlayer on nanoparticulate TiO_(2)surfaces,achieved via lysozyme-molded in-situ surface reforming.The a-TP overlayer modulates surface adsorption energies for reaction intermediates,favoring WOR for H_(2)O_(2)production over the competing O_(2)evolution reaction.Our density functional theory calculations reveal that a-TP/TiO_(2)exhibits a substantial energy uphill for the O·*formation pathway,which disfavors O_(2)evolution but promotes H_(2)O_(2)production.Additionally,the a-TP overlayer strengthens the built-in electric field,resulting in favorable kinetics.Consequently,a-TP/TiO_(2)exhibits 3.7-fold higher Faraday efficiency(FE)of 63%at 1.76 V vs.reversible hydrogen electrode(RHE)under 1 sun illumination,compared to bare TiO_(2)(17%),representing the highest FE among TiO_(2)-based WOR H_(2)O_(2)production systems.Employing the a-TP overlayer constitutes a promising strategy for controlling reaction pathways and achieving efficient solar-to-chemical energy conversion.
基金National Research Foundation of Korea,Grant/Award Numbers:2021M3H4A1A03057403,2021R1A6A3A03039988,2021R1A6A3A13046700,2021R1A2B5B03001851。
文摘The development of new heterostructures with high photoactivity is a breakthrough for the limitation of solar-driven water splitting.Here,we first introduce indium oxide(In_(2)O_(3))nanorods(NRs)as a novel electron transport layer for bismuth vanadate(BiVO_(4))with a short charge diffusion length.In_(2)O_(3)NRs reinforce the electron transport and hole blocking of BiVO_(4),surpassing the state-of-the-art photoelectrochemical performances of BiVO_(4)-based photoanodes.Also,a tannin-nickel-iron complex(TANF)is used as an oxygen evolution catalyst to speed up the reaction kinetics.The final TANF/BiVO_(4)/In_(2)O_(3)NR photoanode generates photocurrent densities of 7.1 mAcm^(−2) in sulfite oxidation and 4.2 mA cm^(−2) in water oxidation at 1.23 V versus the reversible hydrogen electrode.Furthermore,the“artificial leaf,”which is a tandem cell with a perovskite/silicon solar cell,shows a solar-to-hydrogen conversion efficiency of 6.2%for unbiased solar water splitting.We reveal significant advances in the photoactivity of TANF/BiVO_(4)/In_(2)O_(3)NRs from the tailored nanostructure and band structure for charge dynamics.
基金supported by the Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICT(MSIT)(2021R1A2B5B03001851)the NRF Grant funded by the Korean government MSIT(2021M3H4A1A03057403).M.G.L.acknowledges the Basic Science Research Program through the NRF funded by the Ministry of Education(2021R1A6A3A03039988).J.W.Y.acknowledges the Basic Science Research Program through the NRF funded by the Ministry of Education(2021R1A6A3A13046700).
文摘Although bismuth vanadate(BiVO4)has been promising as photoanode material for photoelectrochemical water splitting,its charge recombination issue by short charge diffusion length has led to various studies about heterostructure photoanodes.As a hole blocking layer of BiVO4,titanium dioxide(TiO_(2)) has been considered unsuitable because of its relatively positive valence band edge and low electrical conductivity.Herein,a crystal facet engineering of TiO_(2) nanostructures is proposed to control band structures for the hole blocking layer of BiVO4 nanodots.We design two types of TiO_(2) nanostructures,which are nanorods(NRs)and nanoflowers(NFs)with different(001)and(110)crystal facets,respectively,and fabricate BiVO4/TiO_(2) heterostructure photoanodes.The BiVO4/TiO_(2) NFs showed 4.8 times higher photocurrent density than the BiVO4/TiO_(2) NRs.Transient decay time analysis and time-resolved photoluminescence reveal the enhancement is attributed to the reduced charge recombination,which is originated from the formation of type II band alignment between BiVO4 nanodots and TiO_(2) NFs.This work provides not only new insights into the interplay between crystal facets and band structures but also important steps for the design of highly efficient photoelectrodes.
基金National R&D Program,Grant/Award Number:2021M3H4A3A02086430Nano Material Technology Development Program,Grant/Award Number:2022M3H4A1A01011993+3 种基金Ministry of Science and ICT,South KoreaResearch Institute of Advanced Materials(RIAM)Inter University Semiconductor Research Center(ISRC)National Instrumentation Center for Environmental Management(NICEM)。
文摘Monitoring taste-inducing ions and molecules continuously in liquids or solutions is of great considerable matter for the realization of the electronic tongue(E-tongue).Particularly from the five major tastes,the highly selective,sensitive detection of Na^(+)in real-time is prioritized.Prioritization is due to the saltiness of food is the key ingredient in most meals.Nevertheless,existing Na^(+)detecting devices have relatively low performances of selectivity,sensitivity,and lack of on–off functions.Additionally,conventional devices significantly deteriorate in capac-ity due to repetitive usage or lifetime shortage by degradation of the sensing mate-rial.Herein,a graphene-based channel was rationally designed by the facile decoration of Calix[4]arene and Nafion to address this issue.They act as a receptor and a molecular sieve,respectively,to enhance selectivity and sensitivity and elon-gate the life expectancy of the device.This device was merged with a microfluidic channel to control the injection and withdrawal of solutions to fulfill dynamic on–off functions.The fabricated device has highly selective,sensitive Na^(+)detection properties compared to other 10 molecule/ionic species.Dynamic on–off functions of the device were available,also possesses a long lifespan of at least 220 days.Additionally,it can precisely discriminate real beverages containing Na^(+),which can be observed by principal component analysis plot.These features offer the possibility of ascending to a platform for E-tongues in near future.
基金The authors gratefully acknowledge Beijing Advanced Innovation Center for Intelligent Robots and Systems in Beijing Institute of Technology for the use of FIB and TEM.Financial support was provided by the National Natural Science Foundation of China(No.11704389)the Scientific Equipment Development Project and Youth Innovation Promotion Association Project of Chinese Academy of Sciences.
文摘Lead sulfide(PbS),a typical functional semiconductor material,has attracted serious attention due to its great potential in optoelectronics applications.However,controllable growth of PbS single-crystal film still remains a great challenge.Here,we report heteroepitaxial growth of large-scale highly crystalline PbS films on alkali salt(NaCl and KCl)substrates via chemical vapor deposition(CVD).Structural characterizations demonstrate that the as-grown PbS films exhibit an atomically sharp interface with the underlying substrates.The epitaxial relationships between the epilayers and substrates were determined to be PbS(100)//NaCl(100)or KCl(100),PbS[010]//NaCl[010]or KCl[010].Owing to the high solubility of alkali salt,the epitaxial PbS films can be rapidly released from the underlying substrates and transferred to other substrates of interest while maintaining good integrity and crystallinity,the process of which is particularly attractive in the fields of electronics and optoelectronics.Furthermore,photodetectors based on the transferred PbS films were fabricated,exhibiting a high photoresponsivity of 7.5 A/W,a detectivity of 1.44×10^(12)Jones,and a rapid response time of approximately 0.25 s.This work sheds light on the batch production,green transfer,and optoelectronic application of PbS films.
基金The work was supported by King Abdullah University of Science and Technology(KAUST)baseline funding BAS/1/1614-01-01 and King Abdulaziz City for Science and Technology(Grant No.KACST TIC R2-FP-008)This work was also supported by Korea Photonics Technology Institute(Project No.193300029).
文摘Epitaxially grown III-nitride alloys are tightly bonded materials with mixed covalent-ionic bonds.This tight bonding presents tremendous challenges in developing III-nitride membranes,even though semiconductor membranes can provide numerous advantages by removing thick,inflexible,and costly substrates.Herein,cavities with various sizes were introduced by overgrowing target layers,such as undoped GaN and green LEDs,on nanoporous templates prepared by electrochemical etching of n-type GaN.The large primary interfacial toughness was effectively reduced according to the design of the cavity density,and the overgrown target layers were then conveniently exfoliated by engineering tensile-stressed Ni layers.The resulting III-nitride membranes maintained high crystal quality even after exfoliation due to the use of GaN-based nanoporous templates with the same lattice constant.The microcavity-assisted crack propagation process developed for the current III-nitride membranes forms a universal process for developing various kinds of large-scale and high-quality semiconductor membranes.
基金The funding support from the Natural Science Research Project of Jiangsu Higher Education Institutions(Grant No.21KJA530004)the 2021 Young Scientist Exchange Program between the Republic of Korea and the People’s Republic of Chinaa Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions。
文摘Rationally designed hierarchical structures and heteroatomic doping of carbon are effective strategies to enhance the stability and electrical conductivity of materials.Herein,SnSe_(2)flakes were generated in the double-walled hollow carbon spheres(DWHCSs),in which N and Se atoms were doped in the carbon walls,to construct SnSe_(2)@N,Se-DWHCSs by confined growth and in-situ derivatization.The N and Sedoped DWHCSs can effectively limit the size increase of SnSe_(2),promote ion diffusion kinetics,and buffer volume expansion,which can be proved by electron microscope observation and density functional theory calculation.Consequently,the SnSe_(2)@N,Se-DWHCSs as an anode material for sodium ion batteries(SIBs)demonstrated a distinguished reversible capacity of 322.8 mAh g^(-1)at 5 A g^(-1)after 1000 cycles and a superior rate ability of 235.3 m Ah g^(-1)at an ultrahigh rate of 15 A g^(-1).Furthermore,the structure evolution and electrochemical reaction processes of SnSe2@N,Se-DWHCSs in SIBs were analyzed by exsitu methods,which confirmed the consecutive hybrid mechanism and the phase transition process.
基金the National Natural Science Foundation of China for Youths (General Program),No.30801464the National Basic Research Program of China (973 Program),No.2007CB512705the GIST Systems Biology Program of Korea in 2010
文摘We examined a new method for visualization of the primo vascular system in the rat brain involving lateral ventricle injection of trypan blue. Results showed that the primo vascular system in the lateral ventricles and arachnoid mater of the brain were preferentially stained relative to blood vessels and fascia. The primo-vessels along blood vessels in the brain were clearly exhibited. In addition, the primo vascular system was evident between the fourth ventricle and the quadrigeminal cistern. Our experimental findings indicate that this new technique of lateral ventricle injection of trypan blue can visualize the primo vascular system in lateral ventricles and arachnoid mater of rats in situ.
文摘The original version of this article,unfortunately,contained some mistakes and unintentional wrong description of Fig.6 and the caption of Figs.9,10.The correct version of Fig.6 is below.The mentioned figure name for the Fig.6 on the manuscript should be updated.In 2D vdW synaptic devices,the length of the tunneling barrier can be increased or decreased on the trapped or detrapped electrons.Kumar et al.reported memristive and neuromorphic devices composed of vertically grown WS2 layer and ZnO(Fig.6e)[149].The interlayer separation between WS2 and ZnO layers serves as an effective porous medium allowing the ZnO to grow with defects.The interfacial region of ZnO,the very contiguous to WS2 layer.
基金Lotte Chemical Corporation(R-21-E013)the National Research Foundation(NRF)of Korea grant funded by the Korean Government MSIT(2021R1C1C2006142)Lee MG acknowledges the Basic Science Research Program of the NRF of Korea funded by the Ministry of Education(2021R1A6A3A03039988).
文摘Developing sustainable and clean energy technology is critial to address the current energy and environmental crisis.As an energy carrier,hydrogen has been getting attention due to its abundance,high energy density,and zero carbon emission.Due to the difficulty of hydrogen storage and transport,the electro-oxidation of ammonia shows great potential for renewable energy since it satisfies both energy supply and environmental protection as a carbon-free fuel with high hydrogen content.However,ammonia electro-oxidation is a sluggish reaction and shows low durability.Understanding the complicated mechanism and intermediates is conducive to developing efficient electrocatalysts with high catalytic activity and durability.This review begins with the ammonia oxidation technologies and their principles.The two typical mechanisms for ammonia electro-oxidation,Oswin-Salomon mechanism and Gerischer-Mauerer mechanism,are discussed,and attention to the poisoning species is included.Then,the electrocatalysts for ammonia reaction are classified into Pt-based catalysts and non-noble metal-based catalysts,and their performances are reviewed with various strategies.Based on the progress on the electrochemical ammonia oxidation catalysts,the challenges and future insight on ammonia oxidation reaction are discussed and proposed.
