基金supported by the National Natural Science Foundation of China(Nos.51922004,51874037)State Key Lab of Advanced Metals and Materials,University of Science and Technology Beijing,China(Nos.2019Z-14,2020Z-04,2021Z-03)+7 种基金Fundamental Research Funds for the Central Universities,China(Nos.FRF-TP-19005C1Z,06500236)Interdisciplinary Research Project for Young Teachers of USTB,China(Fundamental Research Funds for the Central Universities,FRF-IDRY-20-023)Postdoctor Research Foundation of Shunde Graduate School of University of Science and Technology Beijing,China(No.2022BH001)the China Postdoctoral Science Foundation(No.2021M700377)the Beijing Natural Science Foundation,China(No.2212035)the support from the European Commission via the H2020 MSCA RISE BAMOS program(No.734156)Innovate UK via Newton Fund(No.102872)Engineering and Physical Science Research Council(EPSRC)via DTP case programme(No.EP/T517793/1)。
文摘针对连铸小方坯的中心疏松等质量缺陷,建立了凝固传热数学模型,以研究二冷强度对连铸小方坯凝固过程的影响规律,优化二冷制度,改善铸坯质量.本文基于射钉和测温实验所建立的小方坯凝固传热模型精细度较高,用此模型深入研究二冷喷嘴的数量和喷射范围对小方坯凝固传热的影响;经验证,模拟结果与实测结果误差在1.7%以内.利用该模型定量分析了二冷强度对铸坯温度,凝固坯壳厚度和凝固终点的影响规律.结果表明,随着二冷强度的增大,二冷区内的铸坯表面中心温度降低,而进入空冷区后则逐渐趋于一致.二冷强度每增加10%,足辊段出口处温度平均降低8℃,二冷一段出口处温度平均降低10.75℃,二冷二段出口处温度平均降低10.75℃,二冷三段出口处温度平均降低9.75℃,铸坯凝固终点缩短约0.168 m.
