During the development of hot dry rock,the research on thermal fatigue damage caused by thermal shock of cold and heat cycles is the basis that ensures the long-term utilization of geothermal resources,but there are n...During the development of hot dry rock,the research on thermal fatigue damage caused by thermal shock of cold and heat cycles is the basis that ensures the long-term utilization of geothermal resources,but there are not enough relevant studies at present.Based on this,the thermal damage tests of granite at different temperatures(250,350,450°C)and quenching cycles(1,5,10,15 cycles)were carried out.Preliminary reveals the damage mechanism and heat transfer law of the quenching cycle effect on hot dry rock.The results show that with the increase of temperature and cycles,the uneven thermal expansion of minerals and the thermal shock caused by quenching promote the crack development of granite,resulting in the decrease of P-wave velocity,thermal conductivity and uniaxial compressive strength of granite.Meanwhile,the COMSOL was used to simulate the heat transfer of hot dry rock under different heat treatment conditions.It concluded that the increase in the number of quenching cycles reduced the heat transfer capacity of the granite,especially more than 10 quenching cycles,which also reflects that the thermal fatigue damage leads to a longer time for the temperature recovery of the hot dry rock mass.In addition,the three-dimensional nonlinear fitting relationship among thermal conductivity,temperature and cycle number was established for the first time,which can better reveal the change rule of thermal conductivity after quenching thermal fatigue effect of hot dry rock.The research results provide theoretical support for hot dry rock reservoir reconstruction and production efficiency evaluation.展开更多
The characteristics of the energy structure of rich coal,less oil and less gas,coupling with a high external dependence on oil and natural gas and the emphasis on the efficient and clean utilisation of coal,have broug...The characteristics of the energy structure of rich coal,less oil and less gas,coupling with a high external dependence on oil and natural gas and the emphasis on the efficient and clean utilisation of coal,have brought opportunities for coal chemical industry.However,with the large-scale popularisation of coal gasification technology,the production and resulting storage of coal gasification slag continue to increase,which not only result in serious environmental pollution and a waste of terrestrial resources,but also seriously affect the sustainable development of coal chemical enterprises.Hence,the treatment of coal gasification slag is extremely important.In this paper,the production,composition,morphology,particle size structure and water holding characteristics of coal gasification slag are introduced,and the methods of carbon ash separation of gasification slag,both domestically and abroad,are summarised.In addition,the paper also summarises the research progress on gasification slag in building materials,ecological restoration,residual carbon utilisation and other high-value utilisation,and ultimately puts forward the idea of the comprehensive utilisation of gasification slag.For large-scale consumption to solve the environmental problems of enterprises and achieve high-value utilisation to increase the economic benefits of enterprises,it is urgent to zealously design a reasonable and comprehensive utilisation technologies with simple operational processes,strong adaptability and economic benefits.展开更多
Accurate characterization and visualization of the complex inner structure and stress distribution of rocks are of vital significance to solve a variety of underground engineering problems. In this paper, we incorpora...Accurate characterization and visualization of the complex inner structure and stress distribution of rocks are of vital significance to solve a variety of underground engineering problems. In this paper, we incorporate several advanced technologies, such as CT scan, three-dimensional(3D) reconstruction, and 3D printing, to produce a physical model representing the natural coal rock that inherently contains complex fractures or joints. We employ 3D frozen stress and photoelastic technologies to characterize and visualize the stress distribution within the fractured rock under uniaxial compression. The 3D printed model presents the fracture structures identical to those of the natural prototype. The mechanical properties of the printed model,including uniaxial compression strength, elastic modulus,and Poisson's ratio, are testified to be similar to those of the prototype coal rock. The frozen stress and photoelastic tests show that the location of stress concentration and the stress gradient around the discontinuous fractures are in good agreement with the numerical predictions of the real coalsample. The proposed method appears to be capable of visually quantifying the influences of discontinuous,irregular fractures on the strength, deformation, and stress concentration of coal rock. The method of incorporating3 D printing and frozen stress technologies shows a promising way to quantify and visualize the complex fracture structures and their influences on 3D stress distribution of underground rocks, which can also be used to verify numerical simulations.展开更多
The macromolecular structure of tectonically deformed coals(TDC)may be determined by the deformation mechanisms of coal.Alterations of the macromolecular structure change the pore structure of TDC and thereby impact p...The macromolecular structure of tectonically deformed coals(TDC)may be determined by the deformation mechanisms of coal.Alterations of the macromolecular structure change the pore structure of TDC and thereby impact physical properties such as porosity and permeability.This study focuses on structure and properties of TDC from the Huaibei and Huainan coal mining areas of southern North China.Relationships between the macromolecular structure and the pore structure of TDC were analyzed using techniques such as X-ray diffraction,high-resolution transmission electron microcopy,and the low-temperature nitrogen adsorption.The results indicated that the directional stress condition can cause the arrangement of basic structural units(BSU)more serious and closer.And,the orientation is stronger in ductile deformed coal than in brittle deformed coal.Tectonic deformation directly influences the macromolecular structure of coal and consequently results in dynamic metamorphism.Because the size of BSU in brittle deformed coal increases more slowly than in ductile deformed coal,frictional heating and stress-chemistry of shearing areas might play a more important role,locally altering coal structure under stress,in brittle deformed coal.Strain energy is more significant in increasing the ductile deformation of coal.Furthermore,mesopores account for larger percentage of the nano-scale pore volume in brittle deformed coals,while mesopores volume in ductile deformed coal diminishes rapidly along with an increase in the proportion of micropores and sub-micropores.This research also approved that the deformations of macromolecular structures change nano-scale pore structures,which are very important for gas adsorption and pervasion space for gas.Therefore,the exploration and development potential of coal bed methane is promising for reservoirs that are subjected to a certain degree of brittle deformation(such as schistose structure coal,mortar structure coal and cataclastic structure coal).It also holds promise for TDC resulting from展开更多
There is a more consanguineous relation be-tween nano-scale deformation of coal structure and meta-morphic-deformed environment. In different metamor-phic-deformed environments, deformation in the coal struc-ture can ...There is a more consanguineous relation be-tween nano-scale deformation of coal structure and meta-morphic-deformed environment. In different metamor-phic-deformed environments, deformation in the coal struc-ture can occur not only at micro-scale, but also at nano-scale, and even leads to the change of molecular structure and nano-scale pore (<100 nm) structure. The latter is the main space absorbing coalbed methane. Through X-ray diffraction (XRD) and liquid–nitrogen absorption methods, the charac-teristics of macromolecular and nano-scale pore structures of coals in different metamorphic-deformed environments and deformational series of coals have been studied. By combin-ing with high-resolution transmission electron microcopy (HRTEM), the macromolecular and nano-scale pore struc-tures are also directly observed. These results demonstrate that the stacking Lc of the macromolecular BSU in tectonic coals increases quickly from the metamorphic-deformed environment of low rank coals to that of high rank coals. For different deformed tectonic coals, in the same metamor-phic-deformed environment, the difference of Lc is obvious. These changes reflect chiefly the difference of different tem-perature and stress effect of nano-scale deformation in tec-tonic coals. The factor of temperature plays a greater role in the increase of macromolecular structure parameters Lc, the influence of stress factor is also important. With the stress strengthening, Lc shows an increasing trend, and La /Lc shows a decreasing trend. Therefore, Lc and La /Lc can be used as the indicator of nano-scale deformation degree of tectonic coals. With increasing temperature and pressure, especially oriented stress, the orientation of molecular structure be-comes stronger, and ordering degree of C-nets and the ar-rangement of BSU are obviously enhanced. For the deforma-tion of nano-scale pore structure, in the same metamor-phic-deformed environment, along with the strengthening of stress, the ratio of mesopores to its total pores volume of tec-toni展开更多
The Upper Paleozoic(Carboniferous to Permian) succession in the east margin of the Ordos Basin in the North China Craton has a potential to contain significant hydrocarbon resources, though attention have been mainly ...The Upper Paleozoic(Carboniferous to Permian) succession in the east margin of the Ordos Basin in the North China Craton has a potential to contain significant hydrocarbon resources, though attention have been mainly attracted for its successful development of coalbed methane(CBM). To improve the previous resource estimates and evaluate the hydrocarbon play possibilities, this study incorporated new discoveries of hydrocarbon units and their stratigraphic relation with source rocks, hydrocarbon migration and trapping configurations. Continuous hydrocarbon accumulation units were identified within the Upper Paleozoic, including the Taiyuan, Shanxi and Xiashihezi formations with great tight gas potential, and the Taiyuan and Shanxi formations also containing shale gas and CBM. Different strata combinations are identified with coal deposition and favour for continuous gas accumulations, including the tidal flat, deltaic and fluvial systems distributed in most of the study areas. Methane was not only generated from the thick coal seams in the Taiyuan and Shanxi formations, but also from shale and dark mudstones. The coal, shale and tight sandstones are proved of remarkable gas content and hydrocarbon indications, and the gas saturation of tight sandstones decreases upward. The stacked deposit combinations vary isochronally in different areas, while the coal seams were developed stably showing good gas sources. Two key stages control the hydrocarbon enrichment, the continuous subsidence from coal forming to Late Triassic and the anomalous paleo-geothermal event happened in Early Cretaceous, as indicated by the fluid inclusions evidence. Extensive areas show good hydrocarbon development potential presently, and more works should be focused on the evaluation and selection of good reservoir combinations.展开更多
With the development on high-speed integrated circuit,fast high resolution sampling ADC and digital signal processors are replacing analog shaping amplifier circuit.This paper firstly presents the numerical analysis a...With the development on high-speed integrated circuit,fast high resolution sampling ADC and digital signal processors are replacing analog shaping amplifier circuit.This paper firstly presents the numerical analysis and simulation on R-C shaping circuit model and C-R shaping circuit model.Mathematic models are established based on 1st order digital differential method and Kirchhoff Current Law in time domain,and a simulation and error evaluation experiment on an ideal digital signal are carried out with Excel VBA.A digital shaping test for a semiconductor X-ray detector in real time is also presented.Then a numerical analysis for Sallen-Key(S-K) low-pass filter circuit model is implemented based on the analysis of digital R-C and digital C-R shaping methods.By applying the 2nd order non-homogeneous differential equation,the authors implement a digital Gaussian filter model for a standard exponential-decaying signal and a nuclear pulse signal.Finally,computer simulations and experimental tests are carried out and the results show the possibility of the digital pulse processing algorithms.展开更多
In recent few years, significant improvement has been made in developing largescale 3 D printer to accommodate the need of industrial-scale 3 D printing. Cementitious materials that are compatible with 3 D printing pr...In recent few years, significant improvement has been made in developing largescale 3 D printer to accommodate the need of industrial-scale 3 D printing. Cementitious materials that are compatible with 3 D printing promote rapid application of this innovative technique in the construction field with advantages of cost effective, high efficiency, design flexibility and environmental friendly. This paper firstly reviews existing 3 D printing techniques that are currently being used in commercial3 D printers. It then summarizes three latest development of largescale 3 D printing systems and identifies their relationships and limiting factors. Thereafter, critical factors that are used to evaluate the workability and printable performance of cementitious materials are specified. Easy-extrusive, easy-flowing, well-buildable, and proper setting time are significant for cementitious material to meet the critical requirements of a freeform construction process. Finally, main advantages, potential applications and the prospects of future research of 3 D printing in construction technology are suggested. The objective of this work is to review current design methodologies and operational constraints of largescale 3 D printing system and provide references for optimizing the performance of cementitious material and promote its responsible use with largescale 3 D printing technology.展开更多
According to the deficiency of experiment system for gas adsorption and desorption in coal mass, a large scale experiment system is developed independently by researchers. This experiment system is composed of primary...According to the deficiency of experiment system for gas adsorption and desorption in coal mass, a large scale experiment system is developed independently by researchers. This experiment system is composed of primary and auxiliary boxes, power transmission system, mining system, loading system, gas charging system, data monitoring and intelligent acquisition system. The maximum experiment coal consumption is 1200 kg, the mining system is developed to conduct experiment for gas desorption under excavating disturbance, and the plane-charging cribriform ventilation device is developed to realize uniform ventilation for experiment coal sample, which is accord with the actual gas source situation of coal bed. The desorption characteristics of gas in coal are experimentally studied under the conditions of nature and mining using the experiment system. The results show that, compare with nature condition, the permeability of coal and the velocity of gas desorption could significantly increase under the influence of coal pressure relief and destruction caused by mining, and the degree of gas desorption could somewhat increase too. Finally, pressure relief gas extraction of current seam and adjacent seams after mining in a certain coal mine of Yangquan mining area are introduced, and the gas desorption experiment results is verified by analyzing the effect of gas extraction.展开更多
The physical and chemical texture of tectonically deformed coals produced by various formational mechanisms are different from those of primary coals,thus resulting in major differences among the physical properties o...The physical and chemical texture of tectonically deformed coals produced by various formational mechanisms are different from those of primary coals,thus resulting in major differences among the physical properties of the reservoirs of these coals. We have studied the adsorption/desorption be-havior of tectonically deformed coals by the use of isothermal adsorption/desorption experiments un-der equilibrium moisture condition. Experiments of isothermal adsorption/desorption of methane or multi-component gases have indicated that,the adsorption curves of coals with a low degree of tec-tonic deformation conform to the type of isothermal adsorption curve described by the Langmuir equation; the methane adsorption curves of coals with strong tectonic deformation cannot be de-scribed by the Langmuir equation. The adsorption/desorption process of methane and multi-compo-nent gases in the deformed coals is not consistent with primary coals,which form an effect of hys-teresis in different kinds of tectonically deformed coals. With the change of pore structure of tectoni-cally deformed coals at reservoir condition,the added adsorbed CH4 in the experiments is desorbed on the pore surface of coals during the pressure reduction process. Thus,the result shows that the ad-sorption volume in the process of desorbing is greater than that in adsorbing. Because of the defor-mation,structural change,and transformation of the adsorption potential field of coals,it is essential to form a new kind of isothermal adsorption curve and the hysteresis effect of the desorption process.展开更多
As shallow resources are increasingly depleted,the mechanics'theory and testing technology of deep insitu rock has become urgent.Traditional coring technologies obtain rock samples without retaining the in-situ en...As shallow resources are increasingly depleted,the mechanics'theory and testing technology of deep insitu rock has become urgent.Traditional coring technologies obtain rock samples without retaining the in-situ environmental conditions,leading to distortion of the measured parameters.Herein,a coring and testing systems retaining in-situ geological conditions is presented:the coring system that obtains in-situ rock samples,and the transfer and testing system that stores and analyzes the rocks under a reconstructed environment.The ICP-Coring system mainly consists of the pressure controller,active insulated core reactor and insulation layer and sealing film.The ultimate bearing strength of 100 MPa for pressurepreservation,temperature control accuracy of 0.97%for temperature-retained are realized.CH_(4)and CO permeability of the optimized sealing film are as low as 3.85 and 0.33 ppm/min.The average tensile elongation of the film is 152.4%and the light transmittance is reduced to 0%.Additionally,the pressure and steady-state temperature accuracy for reconstructing the in-situ environment of transfer and storage system up to 1%and±0.2 is achieved.The error recorded of the noncontact sensor ring made of lowdensity polymer is less than 6%than that of the contact test.The system can provide technical support for the deep in-situ rock mechanics research,improving deep resource acquisition capabilities and further clarifying deep-earth processes.展开更多
Rockburst is becoming a huge challenge for the utilization of deep underground space.Extensive efforts have been devoted to investigating the rockburst behavior and mechanism experimentally,theoretically,and numerical...Rockburst is becoming a huge challenge for the utilization of deep underground space.Extensive efforts have been devoted to investigating the rockburst behavior and mechanism experimentally,theoretically,and numerically.The aim of this review is to discuss the novel development and the state-of-the-art in experimental techniques,theories,and numerical approaches proposed for rockburst.The definition and classification of rockburst are first summarized with an in-depth comparison among them.Then,the available laboratory experimental technologies for rockburst are reviewed in terms of indirect and direct approaches,with the highlight of monitoring technologies and data analysis methods.Some key rockburst influencing factors(i.e.size and shape,rock types,stress state,water content,and temperature)are analyzed and discussed based on collected data.After that,rockburst theories and mechanisms are discussed and evaluated,as well as the microscopic observation.The simulation approaches of rockburst are also summarized with the highlight of optional novel numerical methods.The accuracy,stability,and reliability of different experimental,theoretical and numerical approaches are also compared and assessed in each part.Finally,a summary and some aspects of prospective research are presented.展开更多
Anionic surfactant sodium dodecyl benzene sulfonate(SDBS)at varying concentrations was selected to investigate the influence on the wettability of Zhaozhuang Coal by molecular dynamics simulation.Six groups of water/s...Anionic surfactant sodium dodecyl benzene sulfonate(SDBS)at varying concentrations was selected to investigate the influence on the wettability of Zhaozhuang Coal by molecular dynamics simulation.Six groups of water/surfactant/coal systems with different concentrations were constructed.The influence of surfactant with different concentrations on the wettability of coal was concluded by analyzing various properties from the energetic behaviors to the dynamic characteristics.The results show that the interfacial tension decreases sharply and then rises slowly with the increase of SDBS surfactant concentration,obtaining that surfactants can obviously reduce the interfacial tension.The surfactant molecules could be detected at the water/coal interface through analyzing the system’s relative concentration distribution.In addition,the difference in the wettability of surfactants on coal surfaces is caused by the spatial distribution differences of alkyl chains and the benzene ring of the surfactant molecules.And the negative interaction energy between SDBS and the coal surface indicates that adsorption process is spontaneous.Furthermore,it is of great practical significance for improving the dust reduction effect and reducing the disaster of coal dust by exploring the effects of surfactant molecules on the wettability of coal.展开更多
This study mainly investigates the mechanical mechanism of overlying strata breaking and the development of fractured zones during close-distance coal seam group mining in the Gaojialiang coal mine.First,a mechanical ...This study mainly investigates the mechanical mechanism of overlying strata breaking and the development of fractured zones during close-distance coal seam group mining in the Gaojialiang coal mine.First,a mechanical model for the second"activation"of broken overlying strata is established,and the related mechanical"activation"conditions are obtained.A recursive formula for calculating the separation distance of overlying strata is deduced.Second,a height determining method for predicting the height of fractured zones during close-distance coal seam group mining is proposed based on two values,namely,the separation distance and ultimate subsidence value of overlying strata.This method is applied to calculate the fractured zone heights in nos.20107 and 20307 mining faces.The calculated results are almost equal to the field observation results.Third,a modified formula for calculating the height of a waterflowing fractured zone is proposed.A comparison of the calculated and observed results shows that the errors are small.The height determining method and modified formula not only build a theoretical foundation for water conservation mining at the Gaojialiang coal mine,but also provide a reference for estimating the height of water-flowing fractured zones in other coal mines with similar conditions.展开更多
Coal and gas outburst is an extremely complex dynamic disaster in coal mine production process which will damage casualties and equipment facilities, and disorder the ventilation system by suddenly ejecting a great am...Coal and gas outburst is an extremely complex dynamic disaster in coal mine production process which will damage casualties and equipment facilities, and disorder the ventilation system by suddenly ejecting a great amount of coal and gas into roadway or working face. This paper analyzed the interaction among the three essential elements of coal and gas outburst dynamic system. A stress-seepage-damage coupling model was established which can be used to simulate the evolution of the dynamical system, and then the size scale of coal and gas outburst dynamical system was investigated. Results show that the dynam- ical system is consisted of three essential elements, coal-gas medium （material basis）, geology dynamic environment （internal motivation） and mining disturbance （external motivation）. On the case of CI 3 coal seam in Panyi Mine, the dynamical system exists in the range of 8-12 m in front of advancing face. The size scale will be larger where there are large geologic structures. This research plays an important guid- ing role for developing measures of coal and gas outburst prediction and prevention.展开更多
The effect of sodium butyl xanthate (NaBX) and dodecylamine (DDA) as combined collector on the sulphidizing flotation of copper oxide was investigated by flotation test, fluorescent pyrene probe, zeta potential, and i...The effect of sodium butyl xanthate (NaBX) and dodecylamine (DDA) as combined collector on the sulphidizing flotation of copper oxide was investigated by flotation test, fluorescent pyrene probe, zeta potential, and infrared spectroscopy analyses. The micro-flotation results show that combined use of NaBX+DDA yields better effect than using NaBX at pH 7-11 only, and the optimal molar ratio of NaBX to DDA is 2: 1. The actual ores flotation shows that when the dosage of NaBX+DDA is (100+54) g/t, the copper concentrate grade and recovery are 15.93% and 76.73%, respectively. The fluorescent pyrene probe test demonstrates that the NaBX+DDA can reduce the micelle concentration in the pulp. The zeta potential and the infrared spectroscopy analyses indicate that chemical adsorption, hydrogen-bonding and electrostatic interaction can help to adsorb NaBX+DDA on the surface of malachite. Meantime, copper xanthate and copper-amine complexes may be generated during the adsorption process.展开更多
Gas outbursts from "three-soft" coal seams (soft roof,soft floor and soft coal) constitute a very serious prob-lem in the Ludian gliding structure area in western Henan. By means of theories and methods of g...Gas outbursts from "three-soft" coal seams (soft roof,soft floor and soft coal) constitute a very serious prob-lem in the Ludian gliding structure area in western Henan. By means of theories and methods of gas geology,structural geology,coal petrology and rock tests,we have discussed the effect of control of several physical properties of soft roof on gas preservation and proposed a new method of forecasting gas geological hazards under open structural conditions. The result shows that the areas with type Ⅲ or Ⅳ soft roofs are the most dangerous areas where gas outburst most likely can take place. Therefore,countermeasures should be taken in these areas to prevent gas outbursts.展开更多
The effects of adding a bulking agent and chemically pretreating municipal kitchen waste before aerobic composting were studied using a laboratory-scale system. The system used20-L reactors and each test lasted 28 day...The effects of adding a bulking agent and chemically pretreating municipal kitchen waste before aerobic composting were studied using a laboratory-scale system. The system used20-L reactors and each test lasted 28 days. The objective was to decrease NH3 and H2S emissions during composting. The bulking agent, dry cornstalks, was mixed with the kitchen waste to give a mixture containing 15%（wet weight） bulking agent. A combined treatment was also conducted, in which kitchen waste mixed with the bulking agent was pretreated with ferric chloride（FeC l3）. Less leachate was produced by the composted kitchen waste mixed with bulking agent than by the kitchen waste alone, when the materials had reached the required maturity. The presence of cornstalks also caused less H2 S to be emitted, but had little impact on the amount of NH3 emitted. The FeC l3 was found to act as an effective chemical flocculant,and its presence significantly decreased the amounts of NH3 and H2S emitted. Kitchen waste mixed with cornstalks and treated with FeC l3 emitted 42% less NH3 and 76% less H2 S during composting than did pure kitchen waste.展开更多
To improve the effectiveness of control of surrounding rock and the stability of supports on longwall topcoal caving faces in steeply inclined coal seams, the stability of the roof structure and hydraulic supports was...To improve the effectiveness of control of surrounding rock and the stability of supports on longwall topcoal caving faces in steeply inclined coal seams, the stability of the roof structure and hydraulic supports was studied with physical simulation and theoretical analysis. The results show that roof strata in the vicinity of the tail gate subside extensively with small cutting height, while roof subsidence near the main gate is relatively assuasive. With increase of the mining space, the caving angle of the roof strata above the main gate increases. The characteristics of the vertical and horizontal displacement of the roof strata demonstrate that caved blocks rotate around the lower hinged point of the roof structure, which may lead to sliding instability. Large dip angle of the coal seam makes sliding instability of the roof structure easier.A three-hinged arch can be easily formed above both the tail and main gates in steeply inclined coal seams. With the growth in the dip angle, subsidence of the arch foot formed above the main gate decreases significantly, which reduces the probability of the roof structure becoming unstable as a result of large deformation, while the potential of the roof structure's sliding instability above the tail gate increases dramatically.展开更多
基金financially supported by National Natural Science Foundation of China(Nos.U2013603,52004167,52078477,51827901,and U1965203)Sichuan International Technological innovation Cooperation Project(No.2018HH0159)。
文摘During the development of hot dry rock,the research on thermal fatigue damage caused by thermal shock of cold and heat cycles is the basis that ensures the long-term utilization of geothermal resources,but there are not enough relevant studies at present.Based on this,the thermal damage tests of granite at different temperatures(250,350,450°C)and quenching cycles(1,5,10,15 cycles)were carried out.Preliminary reveals the damage mechanism and heat transfer law of the quenching cycle effect on hot dry rock.The results show that with the increase of temperature and cycles,the uneven thermal expansion of minerals and the thermal shock caused by quenching promote the crack development of granite,resulting in the decrease of P-wave velocity,thermal conductivity and uniaxial compressive strength of granite.Meanwhile,the COMSOL was used to simulate the heat transfer of hot dry rock under different heat treatment conditions.It concluded that the increase in the number of quenching cycles reduced the heat transfer capacity of the granite,especially more than 10 quenching cycles,which also reflects that the thermal fatigue damage leads to a longer time for the temperature recovery of the hot dry rock mass.In addition,the three-dimensional nonlinear fitting relationship among thermal conductivity,temperature and cycle number was established for the first time,which can better reveal the change rule of thermal conductivity after quenching thermal fatigue effect of hot dry rock.The research results provide theoretical support for hot dry rock reservoir reconstruction and production efficiency evaluation.
基金financially supported by the National Key Research and Development Program of China(2019YFC1904302)Foundation of State Key Laboratory of High-efficiency Utilisation of Coal and Green Chemical Engineering(2021-K81)the Technology of Coal-to-liquids Research Institute of National Energy Group([2020]010)。
文摘The characteristics of the energy structure of rich coal,less oil and less gas,coupling with a high external dependence on oil and natural gas and the emphasis on the efficient and clean utilisation of coal,have brought opportunities for coal chemical industry.However,with the large-scale popularisation of coal gasification technology,the production and resulting storage of coal gasification slag continue to increase,which not only result in serious environmental pollution and a waste of terrestrial resources,but also seriously affect the sustainable development of coal chemical enterprises.Hence,the treatment of coal gasification slag is extremely important.In this paper,the production,composition,morphology,particle size structure and water holding characteristics of coal gasification slag are introduced,and the methods of carbon ash separation of gasification slag,both domestically and abroad,are summarised.In addition,the paper also summarises the research progress on gasification slag in building materials,ecological restoration,residual carbon utilisation and other high-value utilisation,and ultimately puts forward the idea of the comprehensive utilisation of gasification slag.For large-scale consumption to solve the environmental problems of enterprises and achieve high-value utilisation to increase the economic benefits of enterprises,it is urgent to zealously design a reasonable and comprehensive utilisation technologies with simple operational processes,strong adaptability and economic benefits.
基金supported by the National Natural Science Foundation for Distinguished Young Scholars of China(51125017)the National Natural Science Foundation of China(51374213)the National Basic Research Program of China(2010CB226804,2011CB201201)
文摘Accurate characterization and visualization of the complex inner structure and stress distribution of rocks are of vital significance to solve a variety of underground engineering problems. In this paper, we incorporate several advanced technologies, such as CT scan, three-dimensional(3D) reconstruction, and 3D printing, to produce a physical model representing the natural coal rock that inherently contains complex fractures or joints. We employ 3D frozen stress and photoelastic technologies to characterize and visualize the stress distribution within the fractured rock under uniaxial compression. The 3D printed model presents the fracture structures identical to those of the natural prototype. The mechanical properties of the printed model,including uniaxial compression strength, elastic modulus,and Poisson's ratio, are testified to be similar to those of the prototype coal rock. The frozen stress and photoelastic tests show that the location of stress concentration and the stress gradient around the discontinuous fractures are in good agreement with the numerical predictions of the real coalsample. The proposed method appears to be capable of visually quantifying the influences of discontinuous,irregular fractures on the strength, deformation, and stress concentration of coal rock. The method of incorporating3 D printing and frozen stress technologies shows a promising way to quantify and visualize the complex fracture structures and their influences on 3D stress distribution of underground rocks, which can also be used to verify numerical simulations.
基金supported by the National Natural Science Foundation of China(Grant No.40772135,4097213141030422)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(XDA05030100)National Science and Technology Major Project(No.2011ZX05060-005).
文摘The macromolecular structure of tectonically deformed coals(TDC)may be determined by the deformation mechanisms of coal.Alterations of the macromolecular structure change the pore structure of TDC and thereby impact physical properties such as porosity and permeability.This study focuses on structure and properties of TDC from the Huaibei and Huainan coal mining areas of southern North China.Relationships between the macromolecular structure and the pore structure of TDC were analyzed using techniques such as X-ray diffraction,high-resolution transmission electron microcopy,and the low-temperature nitrogen adsorption.The results indicated that the directional stress condition can cause the arrangement of basic structural units(BSU)more serious and closer.And,the orientation is stronger in ductile deformed coal than in brittle deformed coal.Tectonic deformation directly influences the macromolecular structure of coal and consequently results in dynamic metamorphism.Because the size of BSU in brittle deformed coal increases more slowly than in ductile deformed coal,frictional heating and stress-chemistry of shearing areas might play a more important role,locally altering coal structure under stress,in brittle deformed coal.Strain energy is more significant in increasing the ductile deformation of coal.Furthermore,mesopores account for larger percentage of the nano-scale pore volume in brittle deformed coals,while mesopores volume in ductile deformed coal diminishes rapidly along with an increase in the proportion of micropores and sub-micropores.This research also approved that the deformations of macromolecular structures change nano-scale pore structures,which are very important for gas adsorption and pervasion space for gas.Therefore,the exploration and development potential of coal bed methane is promising for reservoirs that are subjected to a certain degree of brittle deformation(such as schistose structure coal,mortar structure coal and cataclastic structure coal).It also holds promise for TDC resulting from
基金This work was supported by the National Key Development Plan Project of Basic Research(973 Plan)(Grant No.2002CB211704)the National N atural Science Foundation of China(Grant No.40172058)+1 种基金China Postdoctoral Science Foundation(Grant No.200403508)Kuancheng Wang Post-doctoral Research Award Fund of Chinese Academy of Sciences.
文摘There is a more consanguineous relation be-tween nano-scale deformation of coal structure and meta-morphic-deformed environment. In different metamor-phic-deformed environments, deformation in the coal struc-ture can occur not only at micro-scale, but also at nano-scale, and even leads to the change of molecular structure and nano-scale pore (<100 nm) structure. The latter is the main space absorbing coalbed methane. Through X-ray diffraction (XRD) and liquid–nitrogen absorption methods, the charac-teristics of macromolecular and nano-scale pore structures of coals in different metamorphic-deformed environments and deformational series of coals have been studied. By combin-ing with high-resolution transmission electron microcopy (HRTEM), the macromolecular and nano-scale pore struc-tures are also directly observed. These results demonstrate that the stacking Lc of the macromolecular BSU in tectonic coals increases quickly from the metamorphic-deformed environment of low rank coals to that of high rank coals. For different deformed tectonic coals, in the same metamor-phic-deformed environment, the difference of Lc is obvious. These changes reflect chiefly the difference of different tem-perature and stress effect of nano-scale deformation in tec-tonic coals. The factor of temperature plays a greater role in the increase of macromolecular structure parameters Lc, the influence of stress factor is also important. With the stress strengthening, Lc shows an increasing trend, and La /Lc shows a decreasing trend. Therefore, Lc and La /Lc can be used as the indicator of nano-scale deformation degree of tectonic coals. With increasing temperature and pressure, especially oriented stress, the orientation of molecular structure be-comes stronger, and ordering degree of C-nets and the ar-rangement of BSU are obviously enhanced. For the deforma-tion of nano-scale pore structure, in the same metamor-phic-deformed environment, along with the strengthening of stress, the ratio of mesopores to its total pores volume of tec-toni
基金supported by the Natural Science Foundation of China(grant No.41702171)the Beijing Municipal Excellent Talents Foundation(grant No.2017000020124G107)+1 种基金2017 Open Project Fund of State Key Laboratory of Coal Resources and Safe Mining(grant No.SKLCRSM17KFA12)the Joint Research Fund for Overseas Chinese Scholars and Scholars in HongKong and Macao(grant No.41728005)
文摘The Upper Paleozoic(Carboniferous to Permian) succession in the east margin of the Ordos Basin in the North China Craton has a potential to contain significant hydrocarbon resources, though attention have been mainly attracted for its successful development of coalbed methane(CBM). To improve the previous resource estimates and evaluate the hydrocarbon play possibilities, this study incorporated new discoveries of hydrocarbon units and their stratigraphic relation with source rocks, hydrocarbon migration and trapping configurations. Continuous hydrocarbon accumulation units were identified within the Upper Paleozoic, including the Taiyuan, Shanxi and Xiashihezi formations with great tight gas potential, and the Taiyuan and Shanxi formations also containing shale gas and CBM. Different strata combinations are identified with coal deposition and favour for continuous gas accumulations, including the tidal flat, deltaic and fluvial systems distributed in most of the study areas. Methane was not only generated from the thick coal seams in the Taiyuan and Shanxi formations, but also from shale and dark mudstones. The coal, shale and tight sandstones are proved of remarkable gas content and hydrocarbon indications, and the gas saturation of tight sandstones decreases upward. The stacked deposit combinations vary isochronally in different areas, while the coal seams were developed stably showing good gas sources. Two key stages control the hydrocarbon enrichment, the continuous subsidence from coal forming to Late Triassic and the anomalous paleo-geothermal event happened in Early Cretaceous, as indicated by the fluid inclusions evidence. Extensive areas show good hydrocarbon development potential presently, and more works should be focused on the evaluation and selection of good reservoir combinations.
基金Supported by Shanghai Synchrotron Radiation Facility project
文摘With the development on high-speed integrated circuit,fast high resolution sampling ADC and digital signal processors are replacing analog shaping amplifier circuit.This paper firstly presents the numerical analysis and simulation on R-C shaping circuit model and C-R shaping circuit model.Mathematic models are established based on 1st order digital differential method and Kirchhoff Current Law in time domain,and a simulation and error evaluation experiment on an ideal digital signal are carried out with Excel VBA.A digital shaping test for a semiconductor X-ray detector in real time is also presented.Then a numerical analysis for Sallen-Key(S-K) low-pass filter circuit model is implemented based on the analysis of digital R-C and digital C-R shaping methods.By applying the 2nd order non-homogeneous differential equation,the authors implement a digital Gaussian filter model for a standard exponential-decaying signal and a nuclear pulse signal.Finally,computer simulations and experimental tests are carried out and the results show the possibility of the digital pulse processing algorithms.
基金supported by the National Major Research Instrument Development Project of the National Natural Science Foundation of China(51627812)the opening project of State Key Laboratory of Explosion Science and Technology(Beijing Institute of Technology,KFJJ13-11M)
文摘In recent few years, significant improvement has been made in developing largescale 3 D printer to accommodate the need of industrial-scale 3 D printing. Cementitious materials that are compatible with 3 D printing promote rapid application of this innovative technique in the construction field with advantages of cost effective, high efficiency, design flexibility and environmental friendly. This paper firstly reviews existing 3 D printing techniques that are currently being used in commercial3 D printers. It then summarizes three latest development of largescale 3 D printing systems and identifies their relationships and limiting factors. Thereafter, critical factors that are used to evaluate the workability and printable performance of cementitious materials are specified. Easy-extrusive, easy-flowing, well-buildable, and proper setting time are significant for cementitious material to meet the critical requirements of a freeform construction process. Finally, main advantages, potential applications and the prospects of future research of 3 D printing in construction technology are suggested. The objective of this work is to review current design methodologies and operational constraints of largescale 3 D printing system and provide references for optimizing the performance of cementitious material and promote its responsible use with largescale 3 D printing technology.
基金Acknowledgments This work is supported by the National Key Basic Research Program of China （2013CB227903） and the National Natural Science Foundation of China （U1361209）.
文摘According to the deficiency of experiment system for gas adsorption and desorption in coal mass, a large scale experiment system is developed independently by researchers. This experiment system is composed of primary and auxiliary boxes, power transmission system, mining system, loading system, gas charging system, data monitoring and intelligent acquisition system. The maximum experiment coal consumption is 1200 kg, the mining system is developed to conduct experiment for gas desorption under excavating disturbance, and the plane-charging cribriform ventilation device is developed to realize uniform ventilation for experiment coal sample, which is accord with the actual gas source situation of coal bed. The desorption characteristics of gas in coal are experimentally studied under the conditions of nature and mining using the experiment system. The results show that, compare with nature condition, the permeability of coal and the velocity of gas desorption could significantly increase under the influence of coal pressure relief and destruction caused by mining, and the degree of gas desorption could somewhat increase too. Finally, pressure relief gas extraction of current seam and adjacent seams after mining in a certain coal mine of Yangquan mining area are introduced, and the gas desorption experiment results is verified by analyzing the effect of gas extraction.
基金Supported by National Basic Research Program of China (Grant Nos.2006CB202201 and 2009CB219601)National Natural Science Foundation of China (Grant Nos.40772135,40642013 and 40172058)
文摘The physical and chemical texture of tectonically deformed coals produced by various formational mechanisms are different from those of primary coals,thus resulting in major differences among the physical properties of the reservoirs of these coals. We have studied the adsorption/desorption be-havior of tectonically deformed coals by the use of isothermal adsorption/desorption experiments un-der equilibrium moisture condition. Experiments of isothermal adsorption/desorption of methane or multi-component gases have indicated that,the adsorption curves of coals with a low degree of tec-tonic deformation conform to the type of isothermal adsorption curve described by the Langmuir equation; the methane adsorption curves of coals with strong tectonic deformation cannot be de-scribed by the Langmuir equation. The adsorption/desorption process of methane and multi-compo-nent gases in the deformed coals is not consistent with primary coals,which form an effect of hys-teresis in different kinds of tectonically deformed coals. With the change of pore structure of tectoni-cally deformed coals at reservoir condition,the added adsorbed CH4 in the experiments is desorbed on the pore surface of coals during the pressure reduction process. Thus,the result shows that the ad-sorption volume in the process of desorbing is greater than that in adsorbing. Because of the defor-mation,structural change,and transformation of the adsorption potential field of coals,it is essential to form a new kind of isothermal adsorption curve and the hysteresis effect of the desorption process.
基金supported by the Program for Guangdong Introducing Innovative and Enterpreneurial Teams(No.2019ZT08G315)National Natural Science Foundation of China(No.51827901,U2013603,and 52004166)。
文摘As shallow resources are increasingly depleted,the mechanics'theory and testing technology of deep insitu rock has become urgent.Traditional coring technologies obtain rock samples without retaining the in-situ environmental conditions,leading to distortion of the measured parameters.Herein,a coring and testing systems retaining in-situ geological conditions is presented:the coring system that obtains in-situ rock samples,and the transfer and testing system that stores and analyzes the rocks under a reconstructed environment.The ICP-Coring system mainly consists of the pressure controller,active insulated core reactor and insulation layer and sealing film.The ultimate bearing strength of 100 MPa for pressurepreservation,temperature control accuracy of 0.97%for temperature-retained are realized.CH_(4)and CO permeability of the optimized sealing film are as low as 3.85 and 0.33 ppm/min.The average tensile elongation of the film is 152.4%and the light transmittance is reduced to 0%.Additionally,the pressure and steady-state temperature accuracy for reconstructing the in-situ environment of transfer and storage system up to 1%and±0.2 is achieved.The error recorded of the noncontact sensor ring made of lowdensity polymer is less than 6%than that of the contact test.The system can provide technical support for the deep in-situ rock mechanics research,improving deep resource acquisition capabilities and further clarifying deep-earth processes.
基金supported by the National Natural Science Foundation of China(Grant No.41941018)Key Technology Research on Water Diversion Project for Central Area of Yunnan Province,China.All the supports are gratefully acknowledged.
文摘Rockburst is becoming a huge challenge for the utilization of deep underground space.Extensive efforts have been devoted to investigating the rockburst behavior and mechanism experimentally,theoretically,and numerically.The aim of this review is to discuss the novel development and the state-of-the-art in experimental techniques,theories,and numerical approaches proposed for rockburst.The definition and classification of rockburst are first summarized with an in-depth comparison among them.Then,the available laboratory experimental technologies for rockburst are reviewed in terms of indirect and direct approaches,with the highlight of monitoring technologies and data analysis methods.Some key rockburst influencing factors(i.e.size and shape,rock types,stress state,water content,and temperature)are analyzed and discussed based on collected data.After that,rockburst theories and mechanisms are discussed and evaluated,as well as the microscopic observation.The simulation approaches of rockburst are also summarized with the highlight of optional novel numerical methods.The accuracy,stability,and reliability of different experimental,theoretical and numerical approaches are also compared and assessed in each part.Finally,a summary and some aspects of prospective research are presented.
基金financially supported by the State Key Research Development Program of China(No.2016YFC0600708)the Fundamental Research Funds for the Central Universities of China(No.2011QZ02)the Yue Qi Distinguished Scholar Project,China University of Mining&Technology,Beijing
文摘Anionic surfactant sodium dodecyl benzene sulfonate(SDBS)at varying concentrations was selected to investigate the influence on the wettability of Zhaozhuang Coal by molecular dynamics simulation.Six groups of water/surfactant/coal systems with different concentrations were constructed.The influence of surfactant with different concentrations on the wettability of coal was concluded by analyzing various properties from the energetic behaviors to the dynamic characteristics.The results show that the interfacial tension decreases sharply and then rises slowly with the increase of SDBS surfactant concentration,obtaining that surfactants can obviously reduce the interfacial tension.The surfactant molecules could be detected at the water/coal interface through analyzing the system’s relative concentration distribution.In addition,the difference in the wettability of surfactants on coal surfaces is caused by the spatial distribution differences of alkyl chains and the benzene ring of the surfactant molecules.And the negative interaction energy between SDBS and the coal surface indicates that adsorption process is spontaneous.Furthermore,it is of great practical significance for improving the dust reduction effect and reducing the disaster of coal dust by exploring the effects of surfactant molecules on the wettability of coal.
基金supported by the National Natural Science Foundation of China(Nos.51474137,and 51574154)Shandong Province Natural Science Fund(No.ZR201709180101)+1 种基金Tai’shan Scholar Engineering Construction Fund of Shandong Province of ChinaPostgraduate Technology Innovation Project of Shandong University of Science and Technology(No.SDKDYC 180103).
文摘This study mainly investigates the mechanical mechanism of overlying strata breaking and the development of fractured zones during close-distance coal seam group mining in the Gaojialiang coal mine.First,a mechanical model for the second"activation"of broken overlying strata is established,and the related mechanical"activation"conditions are obtained.A recursive formula for calculating the separation distance of overlying strata is deduced.Second,a height determining method for predicting the height of fractured zones during close-distance coal seam group mining is proposed based on two values,namely,the separation distance and ultimate subsidence value of overlying strata.This method is applied to calculate the fractured zone heights in nos.20107 and 20307 mining faces.The calculated results are almost equal to the field observation results.Third,a modified formula for calculating the height of a waterflowing fractured zone is proposed.A comparison of the calculated and observed results shows that the errors are small.The height determining method and modified formula not only build a theoretical foundation for water conservation mining at the Gaojialiang coal mine,but also provide a reference for estimating the height of water-flowing fractured zones in other coal mines with similar conditions.
基金funded by the National Natural Science Foundation of China(No.51674132)the State Key Research Development Program of China(No.2016YFC0801407-2)+2 种基金the Open Projects of State Key Laboratory for Geo Mechanics and Deep Underground Engineering of China(No.SKLGDUEK1510)the Open Projects of State Key Laboratory of Coal Resources and Safe Mining of China(No.SKLCRSM15KF04)the Research Fund of State and Local Joint Engineering Laboratory for Gas Drainage&Ground Control of Deep Mines(Henan Polytechnic University)(No.G201602)
文摘Coal and gas outburst is an extremely complex dynamic disaster in coal mine production process which will damage casualties and equipment facilities, and disorder the ventilation system by suddenly ejecting a great amount of coal and gas into roadway or working face. This paper analyzed the interaction among the three essential elements of coal and gas outburst dynamic system. A stress-seepage-damage coupling model was established which can be used to simulate the evolution of the dynamical system, and then the size scale of coal and gas outburst dynamical system was investigated. Results show that the dynam- ical system is consisted of three essential elements, coal-gas medium （material basis）, geology dynamic environment （internal motivation） and mining disturbance （external motivation）. On the case of CI 3 coal seam in Panyi Mine, the dynamical system exists in the range of 8-12 m in front of advancing face. The size scale will be larger where there are large geologic structures. This research plays an important guid- ing role for developing measures of coal and gas outburst prediction and prevention.
基金Projects(51504053,51374079)supported by the National Natural Science Foundation of China
文摘The effect of sodium butyl xanthate (NaBX) and dodecylamine (DDA) as combined collector on the sulphidizing flotation of copper oxide was investigated by flotation test, fluorescent pyrene probe, zeta potential, and infrared spectroscopy analyses. The micro-flotation results show that combined use of NaBX+DDA yields better effect than using NaBX at pH 7-11 only, and the optimal molar ratio of NaBX to DDA is 2: 1. The actual ores flotation shows that when the dosage of NaBX+DDA is (100+54) g/t, the copper concentrate grade and recovery are 15.93% and 76.73%, respectively. The fluorescent pyrene probe test demonstrates that the NaBX+DDA can reduce the micelle concentration in the pulp. The zeta potential and the infrared spectroscopy analyses indicate that chemical adsorption, hydrogen-bonding and electrostatic interaction can help to adsorb NaBX+DDA on the surface of malachite. Meantime, copper xanthate and copper-amine complexes may be generated during the adsorption process.
文摘Gas outbursts from "three-soft" coal seams (soft roof,soft floor and soft coal) constitute a very serious prob-lem in the Ludian gliding structure area in western Henan. By means of theories and methods of gas geology,structural geology,coal petrology and rock tests,we have discussed the effect of control of several physical properties of soft roof on gas preservation and proposed a new method of forecasting gas geological hazards under open structural conditions. The result shows that the areas with type Ⅲ or Ⅳ soft roofs are the most dangerous areas where gas outburst most likely can take place. Therefore,countermeasures should be taken in these areas to prevent gas outbursts.
基金supported by the National Natural Science Foundation of China (No. 41275161)the National Science and Technology Support Program (No. 2012BAD14B01)+1 种基金the National Natural Science Foundation of China (NSFC) (No. 41275161)the Ministry of Science and Technology of the People's Republic of China (MOST) (No. 2012BAD14B01) for financing the projects
文摘The effects of adding a bulking agent and chemically pretreating municipal kitchen waste before aerobic composting were studied using a laboratory-scale system. The system used20-L reactors and each test lasted 28 days. The objective was to decrease NH3 and H2S emissions during composting. The bulking agent, dry cornstalks, was mixed with the kitchen waste to give a mixture containing 15%（wet weight） bulking agent. A combined treatment was also conducted, in which kitchen waste mixed with the bulking agent was pretreated with ferric chloride（FeC l3）. Less leachate was produced by the composted kitchen waste mixed with bulking agent than by the kitchen waste alone, when the materials had reached the required maturity. The presence of cornstalks also caused less H2 S to be emitted, but had little impact on the amount of NH3 emitted. The FeC l3 was found to act as an effective chemical flocculant,and its presence significantly decreased the amounts of NH3 and H2S emitted. Kitchen waste mixed with cornstalks and treated with FeC l3 emitted 42% less NH3 and 76% less H2 S during composting than did pure kitchen waste.
基金the Joint Funds of the National Natural Science Foundation of China (No. U1361209)the National Basic Research Program of China (No. 2013CB227903)
文摘To improve the effectiveness of control of surrounding rock and the stability of supports on longwall topcoal caving faces in steeply inclined coal seams, the stability of the roof structure and hydraulic supports was studied with physical simulation and theoretical analysis. The results show that roof strata in the vicinity of the tail gate subside extensively with small cutting height, while roof subsidence near the main gate is relatively assuasive. With increase of the mining space, the caving angle of the roof strata above the main gate increases. The characteristics of the vertical and horizontal displacement of the roof strata demonstrate that caved blocks rotate around the lower hinged point of the roof structure, which may lead to sliding instability. Large dip angle of the coal seam makes sliding instability of the roof structure easier.A three-hinged arch can be easily formed above both the tail and main gates in steeply inclined coal seams. With the growth in the dip angle, subsidence of the arch foot formed above the main gate decreases significantly, which reduces the probability of the roof structure becoming unstable as a result of large deformation, while the potential of the roof structure's sliding instability above the tail gate increases dramatically.
