Wellbore instability is reported frequently as one of the most significant incidents during drilling operations.Analysis of wellbore instability includes estimation of formation mechanical properties and the state of ...Wellbore instability is reported frequently as one of the most significant incidents during drilling operations.Analysis of wellbore instability includes estimation of formation mechanical properties and the state of in situ stresses.In this analysis,the only controllable parameter during drilling operation is the mud weight.If the mud weight is larger than anticipated,the mud will invade into the formation,causing tensile failure of the formation.On the other hand,a lower mud weight can result in shear failures of rock,which is known as borehole breakouts.To predict the potential for failures around the wellbore during drilling,one should use a failure criterion to compare the rock strength against induced tangential stresses around the wellbore at a given mud pressure.The Mohr–Coulomb failure criterion is one of the commonly accepted criteria for estimation of rock strength at a given state of stress.However,the use of other criteria has been debated in the literature.In this paper,Mohr–Coulomb,Hoek–Brown and Mogi–Coulomb failure criteria were used to estimate the potential rock failure around a wellbore located in an onshorefield of Iran.The log based analysis was used to estimate rock mechanical properties of formations and state of stresses.The results indicated that amongst different failure criteria,the Mohr–Coulomb criterion underestimates the highest mud pressure required to avoid breakouts around the wellbore.It also predicts a lower fracture gradient pressure.In addition,it was found that the results obtained from Mogi–Coulomb criterion yield a better comparison with breakouts observed from the caliper logs than that of Hoek–Brown criterion.It was concluded that the Mogi–Coulomb criterion is a better failure criterion as it considers the effect of the intermediate principal stress component in the failure analysis.展开更多
It can be difficult to calculate some under-sampled regions in global Monte Carlo radiation transport calculations. The global variance reduction(GVR) method is a useful solution to the problem of variance reduction e...It can be difficult to calculate some under-sampled regions in global Monte Carlo radiation transport calculations. The global variance reduction(GVR) method is a useful solution to the problem of variance reduction everywhere in a phase space. In this research, a GVR procedure was developed and applied to the Chinese Fusion Engineering Testing Reactor(CFETR). A cylindrical CFETR model was utilized for comparing various implementations of the GVR method to find the optimum.It was found that the flux-based GVR method could ensure more reliable statistical results, achieving an efficiency being 7.43 times that of the analog case. A mesh tally of the scalar neutron flux was chosen for the GVR method to simulate global neutron transport in the CFETR model.Particles distributed uniformly in the system were sampled adequately through ten iterations of GVR weight window.All voxels were scored, and the average relative error was 2.4% in the ultimate step of the GVR iteration.展开更多
在具有全局特性的蒙特卡罗输运精细计算的问题中,传统的MCNP(Monte Carlo N Particle Transport Code)局部减方差方法很难得到理想的计算结果,全局减方差方法(Global Variance Reduction,GVR)则是一种有效的解决方法。针对中国聚变工程...在具有全局特性的蒙特卡罗输运精细计算的问题中,传统的MCNP(Monte Carlo N Particle Transport Code)局部减方差方法很难得到理想的计算结果,全局减方差方法(Global Variance Reduction,GVR)则是一种有效的解决方法。针对中国聚变工程试验反应堆(Chinese Fusion Engineering Testing Reactor,CFETR)的中子输运过程中减小全局方差的问题,将多种形式的GVR方法应用到柱状CFETR中子学模型的计算中。依据不同的中子分布信息,在算例中应用和对比了6种不同形式的GVR权窗,并对不同GVR方法的品质因子(FOMG)、标准差(σ)和有效计数率(Scoring)进行了分析。与AN(MCNPanalog method)相比,GVR方法的FOMG有很大的增长,误差在空间的分布也更加平缓,且具有更高的Scoring。在前人提出的全局减方差的基础上,在计算中应用一些新的GVR形式(能量、径迹数等),计算结果表明,基于中子通量的GVR方法的全局计算效率较AN提高了6.43倍。此外,基于中子能量的全局减方差方法也是一种可行的GVR应用形式,其与AN比较,计算效率提高了5.11倍。综上,基于中子通量的GVR方法具有最佳的全局减方差效果。展开更多
The special purpose Monte Carlo program McMesh was used to study neutron transport in coal slurries for on stream determination of the slurry parameters. McMesh uses the mesh weight window method as the major variance...The special purpose Monte Carlo program McMesh was used to study neutron transport in coal slurries for on stream determination of the slurry parameters. McMesh uses the mesh weight window method as the major variance reduction technique with other methods such as exponential transforms and correlated sampling included as options. There was good agreement between the calculated results from McMesh and from MCNP, a general Monte Carlo program, but McMesh was more efficient and more convenient.展开更多
文摘Wellbore instability is reported frequently as one of the most significant incidents during drilling operations.Analysis of wellbore instability includes estimation of formation mechanical properties and the state of in situ stresses.In this analysis,the only controllable parameter during drilling operation is the mud weight.If the mud weight is larger than anticipated,the mud will invade into the formation,causing tensile failure of the formation.On the other hand,a lower mud weight can result in shear failures of rock,which is known as borehole breakouts.To predict the potential for failures around the wellbore during drilling,one should use a failure criterion to compare the rock strength against induced tangential stresses around the wellbore at a given mud pressure.The Mohr–Coulomb failure criterion is one of the commonly accepted criteria for estimation of rock strength at a given state of stress.However,the use of other criteria has been debated in the literature.In this paper,Mohr–Coulomb,Hoek–Brown and Mogi–Coulomb failure criteria were used to estimate the potential rock failure around a wellbore located in an onshorefield of Iran.The log based analysis was used to estimate rock mechanical properties of formations and state of stresses.The results indicated that amongst different failure criteria,the Mohr–Coulomb criterion underestimates the highest mud pressure required to avoid breakouts around the wellbore.It also predicts a lower fracture gradient pressure.In addition,it was found that the results obtained from Mogi–Coulomb criterion yield a better comparison with breakouts observed from the caliper logs than that of Hoek–Brown criterion.It was concluded that the Mogi–Coulomb criterion is a better failure criterion as it considers the effect of the intermediate principal stress component in the failure analysis.
基金supported by the National Special Project for Magnetic Confined Nuclear Fusion Energy(Nos.2013GB108004 and2015GB108002)the Chinese National Natural Science Foundation(No.11175207)
文摘It can be difficult to calculate some under-sampled regions in global Monte Carlo radiation transport calculations. The global variance reduction(GVR) method is a useful solution to the problem of variance reduction everywhere in a phase space. In this research, a GVR procedure was developed and applied to the Chinese Fusion Engineering Testing Reactor(CFETR). A cylindrical CFETR model was utilized for comparing various implementations of the GVR method to find the optimum.It was found that the flux-based GVR method could ensure more reliable statistical results, achieving an efficiency being 7.43 times that of the analog case. A mesh tally of the scalar neutron flux was chosen for the GVR method to simulate global neutron transport in the CFETR model.Particles distributed uniformly in the system were sampled adequately through ten iterations of GVR weight window.All voxels were scored, and the average relative error was 2.4% in the ultimate step of the GVR iteration.
文摘在具有全局特性的蒙特卡罗输运精细计算的问题中,传统的MCNP(Monte Carlo N Particle Transport Code)局部减方差方法很难得到理想的计算结果,全局减方差方法(Global Variance Reduction,GVR)则是一种有效的解决方法。针对中国聚变工程试验反应堆(Chinese Fusion Engineering Testing Reactor,CFETR)的中子输运过程中减小全局方差的问题,将多种形式的GVR方法应用到柱状CFETR中子学模型的计算中。依据不同的中子分布信息,在算例中应用和对比了6种不同形式的GVR权窗,并对不同GVR方法的品质因子(FOMG)、标准差(σ)和有效计数率(Scoring)进行了分析。与AN(MCNPanalog method)相比,GVR方法的FOMG有很大的增长,误差在空间的分布也更加平缓,且具有更高的Scoring。在前人提出的全局减方差的基础上,在计算中应用一些新的GVR形式(能量、径迹数等),计算结果表明,基于中子通量的GVR方法的全局计算效率较AN提高了6.43倍。此外,基于中子能量的全局减方差方法也是一种可行的GVR应用形式,其与AN比较,计算效率提高了5.11倍。综上,基于中子通量的GVR方法具有最佳的全局减方差效果。
文摘The special purpose Monte Carlo program McMesh was used to study neutron transport in coal slurries for on stream determination of the slurry parameters. McMesh uses the mesh weight window method as the major variance reduction technique with other methods such as exponential transforms and correlated sampling included as options. There was good agreement between the calculated results from McMesh and from MCNP, a general Monte Carlo program, but McMesh was more efficient and more convenient.
