The effects of heat treatment on the properties of multi element wear-resistant low-alloy steel （MLAWS） which is used to make the liner of rolling mill torus were researched. The results show that when quenching tem...The effects of heat treatment on the properties of multi element wear-resistant low-alloy steel （MLAWS） which is used to make the liner of rolling mill torus were researched. The results show that when quenching temperature is lower than 900℃, the hardness increases with the increase of temperature, and when quenching temperature is higher than 900℃, the hardness decreases with the increase of temperature. As quenching temperature is lower than 920℃, the effect of quenching temperature on the impact toughness is not obvious. When quenching temperature is higher than 920℃ , impact toughness decreases with the increase of temperature. When tempering temperature is higher than 450 ℃ , the hardness begins to decrease obviously. After tempering at 350℃, the best wear resistance was obtained. According to the service condition of rolling mill torus liner, the MLAWS is quenched from 900-920 ℃ and tempered at 350-370℃.展开更多
The effects of ultra-dispersed diamond (UDD) on the friction force, wear, and temperature of tri-bological pairs have been investigated. The experimental tests were carried out on a modified piston ring-cylinder liner...The effects of ultra-dispersed diamond (UDD) on the friction force, wear, and temperature of tri-bological pairs have been investigated. The experimental tests were carried out on a modified piston ring-cylinder liner bench tester with different particle mass fractions of 0, 0.02%, and 0.10%. The results show that compared with a pure fluid, the mixture of the fluid and UDD not only reduces the friction and wear, but also reduces the bulk temperature of the specimen. The mechanism by which the UDD lubricant improves the tribological properties has some relationship with surface topography, because it can increase the bearing capability of surfaces.展开更多
A chromium layer about 100 μm thickness was plated on the 38CrMoAl cylinder liner and the chromium layer was mcro quilting milled by using quilting grinding machine. The tribological properties and wear comparison te...A chromium layer about 100 μm thickness was plated on the 38CrMoAl cylinder liner and the chromium layer was mcro quilting milled by using quilting grinding machine. The tribological properties and wear comparison test were studied. The friction coefficient of the cylinder liner plated chromic layer and micro quilting milled is 15%-30% lower than the ordinary cylinder liner. The pits generated by micro quilting milling on the chromic layer surface had good effect of accommodating the abrasive grains and storaging lubricants, which improved the effect of the friction pair significantly. The single-cylinder machine run-in tests revealed that the cylinder liner with plated chromic layer and micro quilting milling had good wear durability, and was different wear mechanisms to ordinary cylinder liner.展开更多
基金ItemSponsored by Tackle-Key-Programof Science and Technology Committee of Henan Province (042426002 ,0535010700)Henan Innovation Project for University Prominent Research Talents (2006KYCX022)
文摘The effects of heat treatment on the properties of multi element wear-resistant low-alloy steel （MLAWS） which is used to make the liner of rolling mill torus were researched. The results show that when quenching temperature is lower than 900℃, the hardness increases with the increase of temperature, and when quenching temperature is higher than 900℃, the hardness decreases with the increase of temperature. As quenching temperature is lower than 920℃, the effect of quenching temperature on the impact toughness is not obvious. When quenching temperature is higher than 920℃ , impact toughness decreases with the increase of temperature. When tempering temperature is higher than 450 ℃ , the hardness begins to decrease obviously. After tempering at 350℃, the best wear resistance was obtained. According to the service condition of rolling mill torus liner, the MLAWS is quenched from 900-920 ℃ and tempered at 350-370℃.
基金Supported by the National Natural Science Foundation of China (No. 50275046)
文摘The effects of ultra-dispersed diamond (UDD) on the friction force, wear, and temperature of tri-bological pairs have been investigated. The experimental tests were carried out on a modified piston ring-cylinder liner bench tester with different particle mass fractions of 0, 0.02%, and 0.10%. The results show that compared with a pure fluid, the mixture of the fluid and UDD not only reduces the friction and wear, but also reduces the bulk temperature of the specimen. The mechanism by which the UDD lubricant improves the tribological properties has some relationship with surface topography, because it can increase the bearing capability of surfaces.
基金Funded by the National Natural Science Foundation of China(No.51275489)the Postdoctoral Science Foundation of China(No.2011M500545)the Youth Science and Technology Foundation of Shanxi Province(No.2008021004)
文摘A chromium layer about 100 μm thickness was plated on the 38CrMoAl cylinder liner and the chromium layer was mcro quilting milled by using quilting grinding machine. The tribological properties and wear comparison test were studied. The friction coefficient of the cylinder liner plated chromic layer and micro quilting milled is 15%-30% lower than the ordinary cylinder liner. The pits generated by micro quilting milling on the chromic layer surface had good effect of accommodating the abrasive grains and storaging lubricants, which improved the effect of the friction pair significantly. The single-cylinder machine run-in tests revealed that the cylinder liner with plated chromic layer and micro quilting milling had good wear durability, and was different wear mechanisms to ordinary cylinder liner.
