在中试规模下,研究餐厨垃圾高温厌氧消化试验,通过监测餐厨垃圾厌氧消化过程中产气量、气体组成等产气情况和消化液中pH值、SCOD、NH4+-N、VFAs等化学指标含量变化,确定餐厨垃圾厌氧消化的最大有机负荷,并分析餐厨垃圾高温厌氧消化技术...在中试规模下,研究餐厨垃圾高温厌氧消化试验,通过监测餐厨垃圾厌氧消化过程中产气量、气体组成等产气情况和消化液中pH值、SCOD、NH4+-N、VFAs等化学指标含量变化,确定餐厨垃圾厌氧消化的最大有机负荷,并分析餐厨垃圾高温厌氧消化技术的可行性,结果表明,在工程上餐厨垃圾单独进行高温厌氧消化产甲烷具有技术可行性,但难以保证系统长时间安全稳定运行;餐厨垃圾厌氧消化正常运行时最大有机负荷可达2.551 kg VS/(m3.d);当系统有机负荷为2.551 kg VS/(m3.d)时,每天每千克VS最高可产生甲烷量0.622 m3;氨氮对餐厨垃圾厌氧消化产甲烷影响明显;餐厨垃圾中固有Na+含量对厌氧消化产甲烷影响不明显。展开更多
Geological repository of high-level nuclear waste(HLNW),the most feasible approach for the safe and permanent treatment of HLNW without human intervention,has been investigated for years by many researchers.In some co...Geological repository of high-level nuclear waste(HLNW),the most feasible approach for the safe and permanent treatment of HLNW without human intervention,has been investigated for years by many researchers.In some countries,real facilities for the geo-logical repository are already under construction.In Japan,however,due to complicated geologic conditions,especially underground water and fractured rock masses,and the high risk of natural disasters,ensuring the long-term stability of the method remains a struggle.The influential factors include underground water,heat generation from radioactive waste,and thermal and chemical weathering of the surrounding rock mass as a natural barrier.It is difficult to estimate and verify the long-term stability for up to one hundred thousand years,a complicated thermal-hydraulic-mechanical-chemical coupling behavior,via any field test.The objective of the study is to develop a numerical method for predicting the long-term stability of geological repositories.As the first step toward realizing this objec-tive,heating and loading tests on cave model made of man-made rock specimens that are composed of diatoms,gypsum,and water,which are viscoplastic materials,were conducted,based on which a newly proposed numerical method with finite element method(FEM)was used to describe the thermal,mechanical,and time-dependent behavior of the model tests for a geological repository.To ensure the accuracy of the numerical calculations,all the material parameters in the thermoelasto-viscoplastic model with consideration of overconsolidation,the structure,and the influence of intermediate stress were determined via triaxial compression/creep tests under various temperatures,confining stresses,and loading rates.Finally,the validity of the numerical method was demonstrated by model tests over a limited time span.展开更多
Mechanical biological treatment(MBT)technology has attracted increasing attention because it can reduce the volume of waste produced.To deal with the current trend of increasing waste,MBT practices are being adopted t...Mechanical biological treatment(MBT)technology has attracted increasing attention because it can reduce the volume of waste produced.To deal with the current trend of increasing waste,MBT practices are being adopted to address waste generated in developing urban societies.In this study,a total of 20 specimens of consolidated undrained triaxial tests were conducted on waste obtained from the Hangzhou Tianziling landfill,China,to evaluate the effect of loading rate on the shear strength parameters of MBT waste.The MBT waste samples exhibited an evident strain-hardening behavior,and no peak was observed even when the axial strain exceeded 25%.Further,the shear strength increased with an increase in the loading rate;the effect of loading rate on shear strength under a low confining pressure was greater than that under a high confining pressure.Furthermore,the shear strength parameters of MBT waste were related to the loading rate.The relationship between the cohesion,internal friction angle,and logarithm of the loading rate could be fitted to a linear relationship,which was established in this study.Finally,the ranges of shear strength parameters cohesion c and effective cohesion c′were determined as 1.0–8.2 kPa and 2.1–14.9 kPa,respectively;the ranges of the internal friction angleφand effective internal friction angleφ’were determined as 16.2°–29°and 19.8°–43.9°,respectively.These results could be used as a valuable reference for conducting stability analyses of MBT landfills.展开更多
文章以餐厨垃圾和稻草为原料,研究了不同进料负荷和回流对半连续式两相厌氧消化产气及系统能量平衡的影响。试验结果表明,不回流的酸化相(A1)和甲烷相离心液回流的酸化相(A2)的产酸量随着负荷的提高而显著增加,其对应的甲烷相(R1,R2)的...文章以餐厨垃圾和稻草为原料,研究了不同进料负荷和回流对半连续式两相厌氧消化产气及系统能量平衡的影响。试验结果表明,不回流的酸化相(A1)和甲烷相离心液回流的酸化相(A2)的产酸量随着负荷的提高而显著增加,其对应的甲烷相(R1,R2)的日产甲烷量随着进料负荷的提高也逐渐增大。在酸化相中,当进料负荷为10 g VS·L-1d-1,水力停留时间为10天时,A1和A2的产酸量同时达到最大,分别为30583 mg·L-1和47559 mg·L-1,A2比A1的产酸量提高了55%。在甲烷相中,当负荷为4 g VS·L-1d-1时,R1,R2的单位VS产气率达到最大,分别为0.43 L·g-1VS和0.51 L·g-1VS,R2比R1单位VS日产甲烷率提高了18.6%。展开更多
Parallel pilot-scale anaerobic digestion systems were conducted to evaluate the influence of system temperatures(30℃and 35℃)on digestion performance,greenhouse gas control and economic efficiency.Biogas productions(...Parallel pilot-scale anaerobic digestion systems were conducted to evaluate the influence of system temperatures(30℃and 35℃)on digestion performance,greenhouse gas control and economic efficiency.Biogas productions(6.64-12.96 m3/d)and methane yields(0.46-0.61 m3/kg VS)of 35℃digestion system were significantly higher than those of 30℃digestion system with the organic loading rate(OLR)of 2.0-4.5 kg VS/m3·d.Two regression equations of methane yields with increasing OLRs were fitted at 30℃and 35℃to predict the methane production of practical food waste(FW)digestion plants.By analyzing process stability,the optimal operating OLRs of 35℃digestion system(4.0 kg VS/m3·d)was found to be higher than that of 30℃digestion system(3.0 kg VS/m3·d),indicating that the 35℃digestion system had better processing capacity.The greenhouse gas emission under corresponding optimal operating OLR of 35℃digestion system was also calculated to be better than that of 30℃digestion system.Even the system temperature of 30℃was found to be more suitable for the digestion where OLR was less than 3.0 kg VS/m3·d,a higher operational temperature of 35℃was still a better choice for conventional high-solid digestion.展开更多
文摘在中试规模下,研究餐厨垃圾高温厌氧消化试验,通过监测餐厨垃圾厌氧消化过程中产气量、气体组成等产气情况和消化液中pH值、SCOD、NH4+-N、VFAs等化学指标含量变化,确定餐厨垃圾厌氧消化的最大有机负荷,并分析餐厨垃圾高温厌氧消化技术的可行性,结果表明,在工程上餐厨垃圾单独进行高温厌氧消化产甲烷具有技术可行性,但难以保证系统长时间安全稳定运行;餐厨垃圾厌氧消化正常运行时最大有机负荷可达2.551 kg VS/(m3.d);当系统有机负荷为2.551 kg VS/(m3.d)时,每天每千克VS最高可产生甲烷量0.622 m3;氨氮对餐厨垃圾厌氧消化产甲烷影响明显;餐厨垃圾中固有Na+含量对厌氧消化产甲烷影响不明显。
基金substantially supported by financial support from Grant-in-Aid Scientific Research(B)(Grant No.17H03304)JSPS,and JSPS KAKENHI(Grant No.JP20K14823).
文摘Geological repository of high-level nuclear waste(HLNW),the most feasible approach for the safe and permanent treatment of HLNW without human intervention,has been investigated for years by many researchers.In some countries,real facilities for the geo-logical repository are already under construction.In Japan,however,due to complicated geologic conditions,especially underground water and fractured rock masses,and the high risk of natural disasters,ensuring the long-term stability of the method remains a struggle.The influential factors include underground water,heat generation from radioactive waste,and thermal and chemical weathering of the surrounding rock mass as a natural barrier.It is difficult to estimate and verify the long-term stability for up to one hundred thousand years,a complicated thermal-hydraulic-mechanical-chemical coupling behavior,via any field test.The objective of the study is to develop a numerical method for predicting the long-term stability of geological repositories.As the first step toward realizing this objec-tive,heating and loading tests on cave model made of man-made rock specimens that are composed of diatoms,gypsum,and water,which are viscoplastic materials,were conducted,based on which a newly proposed numerical method with finite element method(FEM)was used to describe the thermal,mechanical,and time-dependent behavior of the model tests for a geological repository.To ensure the accuracy of the numerical calculations,all the material parameters in the thermoelasto-viscoplastic model with consideration of overconsolidation,the structure,and the influence of intermediate stress were determined via triaxial compression/creep tests under various temperatures,confining stresses,and loading rates.Finally,the validity of the numerical method was demonstrated by model tests over a limited time span.
基金funded by the National Natural Science Foundation of China(Nos.51978625 and 51678532)the Zhejiang Provincial Natural Science Foundation of China(No.LZ21E080003)。
文摘Mechanical biological treatment(MBT)technology has attracted increasing attention because it can reduce the volume of waste produced.To deal with the current trend of increasing waste,MBT practices are being adopted to address waste generated in developing urban societies.In this study,a total of 20 specimens of consolidated undrained triaxial tests were conducted on waste obtained from the Hangzhou Tianziling landfill,China,to evaluate the effect of loading rate on the shear strength parameters of MBT waste.The MBT waste samples exhibited an evident strain-hardening behavior,and no peak was observed even when the axial strain exceeded 25%.Further,the shear strength increased with an increase in the loading rate;the effect of loading rate on shear strength under a low confining pressure was greater than that under a high confining pressure.Furthermore,the shear strength parameters of MBT waste were related to the loading rate.The relationship between the cohesion,internal friction angle,and logarithm of the loading rate could be fitted to a linear relationship,which was established in this study.Finally,the ranges of shear strength parameters cohesion c and effective cohesion c′were determined as 1.0–8.2 kPa and 2.1–14.9 kPa,respectively;the ranges of the internal friction angleφand effective internal friction angleφ’were determined as 16.2°–29°and 19.8°–43.9°,respectively.These results could be used as a valuable reference for conducting stability analyses of MBT landfills.
文摘文章以餐厨垃圾和稻草为原料,研究了不同进料负荷和回流对半连续式两相厌氧消化产气及系统能量平衡的影响。试验结果表明,不回流的酸化相(A1)和甲烷相离心液回流的酸化相(A2)的产酸量随着负荷的提高而显著增加,其对应的甲烷相(R1,R2)的日产甲烷量随着进料负荷的提高也逐渐增大。在酸化相中,当进料负荷为10 g VS·L-1d-1,水力停留时间为10天时,A1和A2的产酸量同时达到最大,分别为30583 mg·L-1和47559 mg·L-1,A2比A1的产酸量提高了55%。在甲烷相中,当负荷为4 g VS·L-1d-1时,R1,R2的单位VS产气率达到最大,分别为0.43 L·g-1VS和0.51 L·g-1VS,R2比R1单位VS日产甲烷率提高了18.6%。
基金We acknowledge that this work was financially support by University Doctorial Foundation(No.20120010110004)Beijing Natural Science Foundation(No.8142030).
文摘Parallel pilot-scale anaerobic digestion systems were conducted to evaluate the influence of system temperatures(30℃and 35℃)on digestion performance,greenhouse gas control and economic efficiency.Biogas productions(6.64-12.96 m3/d)and methane yields(0.46-0.61 m3/kg VS)of 35℃digestion system were significantly higher than those of 30℃digestion system with the organic loading rate(OLR)of 2.0-4.5 kg VS/m3·d.Two regression equations of methane yields with increasing OLRs were fitted at 30℃and 35℃to predict the methane production of practical food waste(FW)digestion plants.By analyzing process stability,the optimal operating OLRs of 35℃digestion system(4.0 kg VS/m3·d)was found to be higher than that of 30℃digestion system(3.0 kg VS/m3·d),indicating that the 35℃digestion system had better processing capacity.The greenhouse gas emission under corresponding optimal operating OLR of 35℃digestion system was also calculated to be better than that of 30℃digestion system.Even the system temperature of 30℃was found to be more suitable for the digestion where OLR was less than 3.0 kg VS/m3·d,a higher operational temperature of 35℃was still a better choice for conventional high-solid digestion.
