The experimental research on cavity flow field plays an important part in the structural design and optimization study of trapped vortex combustor (TVC). Many of the previous flow field experiments were conducted in t...The experimental research on cavity flow field plays an important part in the structural design and optimization study of trapped vortex combustor (TVC). Many of the previous flow field experiments were conducted in the cold condition instead of during combustion. This paper adopting PIV system and Lambda-2 vortex criterion in-vestigates the influence of various factors, such as equivalent ratio in the cavity, air intake parameter in the cavity, mainstream air intake parameter and mainstream holder structure, on cavity flow field for a TVC using methane as the fuel. The experimental research showed that cold-condition flow field differed from the combustion flow field, in terms of either vortex core position or vortex structure. Mainstream air intake velocity and cavity air intake velocity affected the flow field structure. U-type and V-type mainstream holders had significant influence on cavity flow field.展开更多
This paper presents results on the combustion of syngas fuel in re-circulating vortex combustor. The combustion stability is achieved through the use of cavities in which recirculation zones of hot products generated ...This paper presents results on the combustion of syngas fuel in re-circulating vortex combustor. The combustion stability is achieved through the use of cavities in which recirculation zones of hot products generated by the direct injection of fuel and air are created and acting as a continuous source of ignition for the incoming main fuel-air stream. CFD （computational fluid dynamics） analysis was performed in this study to test the combustion performance and emissions from the vortex trapped combustor using synthetic gas or syngas fuel produced from the gasification process. The flame temperature, the flow field and species concentrations inside the vortex trapped combustor were obtained. Several syngas fuels with different fuel compositions （H2, CO, CH4, CO2, N2 and H20） and lower heating values were tested in this study. The changes on the flame temperature and species concentrations inside the combustor, the emissions of NOx, CO, CO2 at the exit of the combustor, the combustor efficiency and the total pressure drop for syngas fuels are presented in this paper. The effect of H2/CO ratio and the mass fraction of each constituent of syngas fuels and hydrogen-methane fuel mixtures on the combustion and emissions performances were investigated.展开更多
To improve the combustor performance of multi-point injection combustion,lobe nozzle design was applied to the aero-engine model combustor,by presetting the swirl through a certain twisted angle of the edge of the lob...To improve the combustor performance of multi-point injection combustion,lobe nozzle design was applied to the aero-engine model combustor,by presetting the swirl through a certain twisted angle of the edge of the lobe outlet.Numerical simulation in combination with modelling test is used in this paper.The effects of swirl vorticity presetting onto the vortex structure,the characteristics of combustion temperature field,the combustor exit temperature field quality,the combustion efficiency,and the NOx emissions of multi-point injection combustion chamber are investigated.Compared with the conventional vortex flow at the lobe outlet edge,the results of numerical simulation and water modelling test of the swirl vorticity presetting show that the swirl presetting can efficiently enhance the range and intensity of the lobe-induced vorticities.Besides,it can improve the uniformity of the combustion temperature in the combustor chamber,together with the reduced emissions of the pollutant NOx.Moreover,compared with the conventional lobe nozzle chamber,the swirl vortex presetting can effectively improve its combustion performance.The flow simulation test results demonstrate the fluid vortex structure in the combustion chamber and validate the simulation results.展开更多
Combustion performances of pure hydrogen in an experimental trapped vortex combustor have been tested underdifferent operating conditions. Pressure fluctuations, NOx emissions, OH distributions, and LBO (Lean Blow Out...Combustion performances of pure hydrogen in an experimental trapped vortex combustor have been tested underdifferent operating conditions. Pressure fluctuations, NOx emissions, OH distributions, and LBO (Lean Blow Out)were measured in the tests. Results indicate that the TVC test rig has successfully realized a double vortex constructionin the cavity zone in a wide range of flow conditions. Hydrogen combustion in the test rig has achievedan excellent LBO performance and relatively low NOx emissions. Through comparison of dynamic pressure data,OH fluctuation images, and NOx emissions, the optimal operating condition has been found out to be Φp=0.4,fuel split=0.4, and primary air/fuel premixed.展开更多
文摘The experimental research on cavity flow field plays an important part in the structural design and optimization study of trapped vortex combustor (TVC). Many of the previous flow field experiments were conducted in the cold condition instead of during combustion. This paper adopting PIV system and Lambda-2 vortex criterion in-vestigates the influence of various factors, such as equivalent ratio in the cavity, air intake parameter in the cavity, mainstream air intake parameter and mainstream holder structure, on cavity flow field for a TVC using methane as the fuel. The experimental research showed that cold-condition flow field differed from the combustion flow field, in terms of either vortex core position or vortex structure. Mainstream air intake velocity and cavity air intake velocity affected the flow field structure. U-type and V-type mainstream holders had significant influence on cavity flow field.
文摘This paper presents results on the combustion of syngas fuel in re-circulating vortex combustor. The combustion stability is achieved through the use of cavities in which recirculation zones of hot products generated by the direct injection of fuel and air are created and acting as a continuous source of ignition for the incoming main fuel-air stream. CFD （computational fluid dynamics） analysis was performed in this study to test the combustion performance and emissions from the vortex trapped combustor using synthetic gas or syngas fuel produced from the gasification process. The flame temperature, the flow field and species concentrations inside the vortex trapped combustor were obtained. Several syngas fuels with different fuel compositions （H2, CO, CH4, CO2, N2 and H20） and lower heating values were tested in this study. The changes on the flame temperature and species concentrations inside the combustor, the emissions of NOx, CO, CO2 at the exit of the combustor, the combustor efficiency and the total pressure drop for syngas fuels are presented in this paper. The effect of H2/CO ratio and the mass fraction of each constituent of syngas fuels and hydrogen-methane fuel mixtures on the combustion and emissions performances were investigated.
基金supported by the Natural Science Fund of Liaoning Province Project (No. 201602566)
文摘To improve the combustor performance of multi-point injection combustion,lobe nozzle design was applied to the aero-engine model combustor,by presetting the swirl through a certain twisted angle of the edge of the lobe outlet.Numerical simulation in combination with modelling test is used in this paper.The effects of swirl vorticity presetting onto the vortex structure,the characteristics of combustion temperature field,the combustor exit temperature field quality,the combustion efficiency,and the NOx emissions of multi-point injection combustion chamber are investigated.Compared with the conventional vortex flow at the lobe outlet edge,the results of numerical simulation and water modelling test of the swirl vorticity presetting show that the swirl presetting can efficiently enhance the range and intensity of the lobe-induced vorticities.Besides,it can improve the uniformity of the combustion temperature in the combustor chamber,together with the reduced emissions of the pollutant NOx.Moreover,compared with the conventional lobe nozzle chamber,the swirl vortex presetting can effectively improve its combustion performance.The flow simulation test results demonstrate the fluid vortex structure in the combustion chamber and validate the simulation results.
基金National Natural Science Foundation of China (No. 50576098)the National High Technology R&D Project of China (No.2006AA05A104)
文摘Combustion performances of pure hydrogen in an experimental trapped vortex combustor have been tested underdifferent operating conditions. Pressure fluctuations, NOx emissions, OH distributions, and LBO (Lean Blow Out)were measured in the tests. Results indicate that the TVC test rig has successfully realized a double vortex constructionin the cavity zone in a wide range of flow conditions. Hydrogen combustion in the test rig has achievedan excellent LBO performance and relatively low NOx emissions. Through comparison of dynamic pressure data,OH fluctuation images, and NOx emissions, the optimal operating condition has been found out to be Φp=0.4,fuel split=0.4, and primary air/fuel premixed.
