Few studies jointly investigate thermal and turbulent effects. In general, these subjects are treated separately. The purpose of this paper is to use the Immersed Boundary Method (IBM) coupled with the Virtual Physica...Few studies jointly investigate thermal and turbulent effects. In general, these subjects are treated separately. The purpose of this paper is to use the Immersed Boundary Method (IBM) coupled with the Virtual Physical Model (VPM) to investigate incompressible two-dimensional Newtonian flow around a heated square cylinder at constant temperature on its surface with forced convection and turbulence. The VPM model dynamically evaluates the force that the fluid exerts on the immersed surface and the thermal exchange between both in the Reynolds numbers (Re) window 40 ≤ Re ≤ 5×103 . For simulations of turbulence the Smagorinsky and Spalart-Allmaras models are used. The first model uses the Large Eddy Simulation (LES) methodology and is based on the local equilibrium hypothesis for small scales associated with the Boussinesq hypothesis, such that the energy injected into the spectrum of the turbulence balances the energy dissipated by convective effects. The second model uses the concept Unsteady Reynolds Averaged Navier-Stokes Equations (URANS), with only one transport equation for turbulent viscosity, being calibrated in pressure gradient layers. The goal of this work is to analyse the combination of the heat-transfer phenomena with the turbulence for the thermo-fluid-structure interaction in a square cylinder. For this, it was developed a C/C++ code that requires low computational costs in regards to memory and computer facilities. It is observed that, with the increase of the Reynolds number, an increase of the drag coefficient occurs, as well as reinforces the influence of the pressure distribution downstream of the cylinder, which is strongly influenced by the formation and detachment of vortices on the upper and lower sides of the square cylinder.展开更多
Two coaxial vertical cylinders-one is a riding hollow cylinder and the other a solid cylinder of greater radius at some distance above an impermeable horizontal bottom,were considered.This problem of diffraction by th...Two coaxial vertical cylinders-one is a riding hollow cylinder and the other a solid cylinder of greater radius at some distance above an impermeable horizontal bottom,were considered.This problem of diffraction by these two cylinders,which were considered as idealization of a buoy and a circular plate,can be considered as a wave energy device.The wave energy that is created and transferred by this device can be appropriately used in many applications in lieu of conventional energy.Method of separation of variables was used to obtain the analytical expressions for the diffracted potentials in four clearly identified regions.By applying the appropriate matching conditions along the three virtual boundaries between the regions,a system of linear equations was obtained,which was solved for the unknown coefficients.The potentials allowed us to obtain the exciting forces acting on both cylinders.Sets of exciting forces were obtained for different radii of the cylinders and for different gaps between the cylinders.It was observed that changes in radius and the gap had significant effect on the forces.It was found that mostly the exciting forces were significant only at lower frequencies.The exciting forces almost vanished at higher frequencies.The problem was also investigated for the base case of no plate arrangement,i.e.,the case having only the floating cylinder tethered to the sea-bed.Comparison of forces for both arrangements was carried out.In order to take care of the radiation of the cylinders due to surge motion,the corresponding added mass and the damping coefficients for both cylinders were also computed.All the results were depicted graphically and compared with available results.展开更多
The spectrum characteristics and wake structures for a circular cylinder oscillating in a wake are investigated by use of the currently modified virtual boundary method. A forced system of two cylinders with a small s...The spectrum characteristics and wake structures for a circular cylinder oscillating in a wake are investigated by use of the currently modified virtual boundary method. A forced system of two cylinders with a small spacing (the downstream one is made to oscillate in the transverse direction) is studied and interesting flow characteristics are observed. A vortex switch and the change of vortex modes (between 2S mode and 2P mode) are observed in the “lock in' region. Vortex bands are formed and lost with the increasing excitation frequency. Information concerning saddle points in the flow field is obtained for different excitation frequencies. For a forced system of two cylinders with a large spacing, the upstream cylinder sheds vortexes because there is no downstream cylinder oscillating in the wake. No distinct “lock in' response is found for the downstream cylinder.展开更多
基金the partial support by CMUP(UID/MAT/00144/2013),which is funded by FCT(Portugal)with national(MCTES)and European structural funds(FEDER),under the partnership agreement PT2020-ext.to 2018the financial support by CAPES(Brazil)SG acknowledges the Project STRIDE-NORTE-01-0145-FEDER-000033,funded by ERDF NORTE 2020.
文摘Few studies jointly investigate thermal and turbulent effects. In general, these subjects are treated separately. The purpose of this paper is to use the Immersed Boundary Method (IBM) coupled with the Virtual Physical Model (VPM) to investigate incompressible two-dimensional Newtonian flow around a heated square cylinder at constant temperature on its surface with forced convection and turbulence. The VPM model dynamically evaluates the force that the fluid exerts on the immersed surface and the thermal exchange between both in the Reynolds numbers (Re) window 40 ≤ Re ≤ 5×103 . For simulations of turbulence the Smagorinsky and Spalart-Allmaras models are used. The first model uses the Large Eddy Simulation (LES) methodology and is based on the local equilibrium hypothesis for small scales associated with the Boussinesq hypothesis, such that the energy injected into the spectrum of the turbulence balances the energy dissipated by convective effects. The second model uses the concept Unsteady Reynolds Averaged Navier-Stokes Equations (URANS), with only one transport equation for turbulent viscosity, being calibrated in pressure gradient layers. The goal of this work is to analyse the combination of the heat-transfer phenomena with the turbulence for the thermo-fluid-structure interaction in a square cylinder. For this, it was developed a C/C++ code that requires low computational costs in regards to memory and computer facilities. It is observed that, with the increase of the Reynolds number, an increase of the drag coefficient occurs, as well as reinforces the influence of the pressure distribution downstream of the cylinder, which is strongly influenced by the formation and detachment of vortices on the upper and lower sides of the square cylinder.
文摘Two coaxial vertical cylinders-one is a riding hollow cylinder and the other a solid cylinder of greater radius at some distance above an impermeable horizontal bottom,were considered.This problem of diffraction by these two cylinders,which were considered as idealization of a buoy and a circular plate,can be considered as a wave energy device.The wave energy that is created and transferred by this device can be appropriately used in many applications in lieu of conventional energy.Method of separation of variables was used to obtain the analytical expressions for the diffracted potentials in four clearly identified regions.By applying the appropriate matching conditions along the three virtual boundaries between the regions,a system of linear equations was obtained,which was solved for the unknown coefficients.The potentials allowed us to obtain the exciting forces acting on both cylinders.Sets of exciting forces were obtained for different radii of the cylinders and for different gaps between the cylinders.It was observed that changes in radius and the gap had significant effect on the forces.It was found that mostly the exciting forces were significant only at lower frequencies.The exciting forces almost vanished at higher frequencies.The problem was also investigated for the base case of no plate arrangement,i.e.,the case having only the floating cylinder tethered to the sea-bed.Comparison of forces for both arrangements was carried out.In order to take care of the radiation of the cylinders due to surge motion,the corresponding added mass and the damping coefficients for both cylinders were also computed.All the results were depicted graphically and compared with available results.
文摘为探讨电液伺服系统的同步控制方法,以一个四液压缸大型平台电液伺服同步控制系统为对象,采用实验数据辨识4个液压缸的数学模型,对神经元自适应控制器用于同步控制进行了研究和改进,提出了虚拟主动缸和混合同步神经元控制结构.仿真结果表明:采用虚拟主动缸的同步效果好,最大同步误差为0.2606 mm,但需要建立1个液压缸的数学模型;采用混合同步神经元控制结构,不需要建立数学模型,可通过调节参数控制同步误差,较好地实现同步控制,3和8Hz正弦信号输入时最大同步误差分别为0.4313和0.3825 mm.
文摘The spectrum characteristics and wake structures for a circular cylinder oscillating in a wake are investigated by use of the currently modified virtual boundary method. A forced system of two cylinders with a small spacing (the downstream one is made to oscillate in the transverse direction) is studied and interesting flow characteristics are observed. A vortex switch and the change of vortex modes (between 2S mode and 2P mode) are observed in the “lock in' region. Vortex bands are formed and lost with the increasing excitation frequency. Information concerning saddle points in the flow field is obtained for different excitation frequencies. For a forced system of two cylinders with a large spacing, the upstream cylinder sheds vortexes because there is no downstream cylinder oscillating in the wake. No distinct “lock in' response is found for the downstream cylinder.
