期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Turbulence modelling of the aerodynamic interaction ofOGV wakes and diffuser flow 被引量:1
1
作者 Page Gary McGuirk Jim 《航空动力学报》 EI CAS CSCD 北大核心 2011年第10期2302-2312,共11页
Different turbulence closures were used to predict the flow interaction between the wakes created by compressor outlet guide vanes(OGVs) and a downstream annular pre-diffuser.Two statistical turbulence models were tes... Different turbulence closures were used to predict the flow interaction between the wakes created by compressor outlet guide vanes(OGVs) and a downstream annular pre-diffuser.Two statistical turbulence models were tested based on the classical Reynolds-averaged Navier-Stokes(RANS) approach.Both high-Re and low-Re(Launder-Sharma) versions of the k-ε model were applied to a selected test problem for OGV wake/diffuser flows.The test problem was specifically chosen because experimentally determined inlet conditions and both profile and performance data were available to validate predictions.A preliminary study was also reported of the more advanced large eddy simulation(LES) approach.The LES sub-grid-scale(SGS) model was the basic Smagorinsky eddy viscosity assumption,with a Van-Driest damping function for improved capture of near-wall viscous behaviour.Comparison between the two RANS models showed little difference in terms of velocity contours at OGV trailing edge and diffuser exit.In terms of overall diffuser performance(static pressure recovery and total pressure loss coefficients),the high-Re model was shown to agree well with experimental data.The preliminary LES study indicates the highly unsteady character of the OGV wake flow,but requires improved treatment of inlet conditions. 展开更多
关键词 outlet guide vane(ogv) wakes diffuser flow interaction Reynolds-averaged Navier-Stokes(RANS) modelling large eddy simulation(LES) modelling
原文传递
后导叶对喷水推进轴流泵性能的影响(英文) 被引量:17
2
作者 汤方平 王国强 《船舶力学》 EI 北大核心 2006年第6期19-26,共8页
通过三维紊流数值计算和模型试验研究后导叶对轴流泵整体性能的影响。计算和泵试验表明,基于RNGk-!紊流模型的定常流动分析能有效预测高效区内的泵特性。叶轮和导叶之间的轴向间隙为0.1D时,后导叶对叶轮性能几乎没有影响,后导叶主要以... 通过三维紊流数值计算和模型试验研究后导叶对轴流泵整体性能的影响。计算和泵试验表明,基于RNGk-!紊流模型的定常流动分析能有效预测高效区内的泵特性。叶轮和导叶之间的轴向间隙为0.1D时,后导叶对叶轮性能几乎没有影响,后导叶主要以对叶轮出口水流的旋转动能的回收和水力损失的形式对泵的特性产生影响。通过后导叶设计工况的选择,可适应不同的应用要求,实现叶轮和后导叶优化配置的目的。 展开更多
关键词 后导叶 轴流泵 紊流模型 数值计算 泵模型试验
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部