A new approach for unparallel trajectory bistatic spotlight SAR imaging is proposed. The approach utilizes the concept of instantaneous Doppler wavenumber and introduces two variants, the sum-range and subtraction-ran...A new approach for unparallel trajectory bistatic spotlight SAR imaging is proposed. The approach utilizes the concept of instantaneous Doppler wavenumber and introduces two variants, the sum-range and subtraction-range, to develop the 2D frequency analytical formula. Based on the assumption of plane wavefront, the transmitting and receiving Doppler are separated and formulated via series reversion. And frequency scaling is applied to focus image. The algorithm is with high computational efficiency, and provides well focus for limited scene imaging. Simulation result confirms the validity of the approach.展开更多
Strength and deformability characteristics of rock with pre-existing fissures are governed by cracking behavior. To further research the effects of pre-existing fissures on the mechanical properties and crack coalesce...Strength and deformability characteristics of rock with pre-existing fissures are governed by cracking behavior. To further research the effects of pre-existing fissures on the mechanical properties and crack coalescence process, a series of uniaxial compression tests were carried out for rock-like material with two unparallel fissures.In the present study, cement, quartz sand, and water were used to fabricate a kind of brittle rock-like material cylindrical model specimen. The mechanical properties of rock-like material specimen used in this research were all in good agreement with the brittle rock materials. Two unparallel fissures（a horizontal fissure and an inclined fissure） were created by inserting steel during molding the model specimen.Then all the pre-fissured rock-like specimens were tested under uniaxial compression by a rock mechanics servocontrolled testing system. The peak strength and Young＇s modulus of pre-fissured specimen all first decreased and then increased when the fissure angle increased from 0？to 75？.In order to investigate the crack initiation, propagation and coalescence process, photographic monitoring was adopted to capture images during the entire deformation process.Moreover, acoustic emission（AE） monitoring technique was also used to obtain the AE evolution characteristic of prefissured specimen. The relationship between axial stress, AE events, and the crack coalescence process was set up： when a new crack was initiated or a crack coalescence occurred, thecorresponding axial stress dropped in the axial stress–time curve and a big AE event could be observed simultaneously.Finally, the mechanism of crack propagation under microscopic observation was discussed. These experimental results are expected to increase the understanding of the strength failure behavior and the cracking mechanism of rock containing unparallel fissures.展开更多
To solve the problem of finishing the twist blade surface of an impeller, the five-axis numerically controlled electrochemical contour evolution grinding （NC-ECCEG） is studied. Over-cutting errors of NC-ECCEG of the...To solve the problem of finishing the twist blade surface of an impeller, the five-axis numerically controlled electrochemical contour evolution grinding （NC-ECCEG） is studied. Over-cutting errors of NC-ECCEG of the twist blade surface generated by parallel lines are analyzed. The formula for calculating the over-cutting error is deduced. The method for eliminating the over-cutting error is used in the conical grinding wheel and the combined five-axis linkage NC-ECCEG system. The structure and the movement of the NC-ECCEG machine tool,the combined multi-axis NC system and its linkage control technology are introduced. Further, the mathematical model of the NC-ECCEG unparallel-ruled surface is established. An auto-programming system on five-axis NGECCEG is developed to grind the impeller. The machining efficiency of NC-ECCEG increases more than 12 times than that of manual polishing operations.展开更多
基金Supported by the National Natural Science Foundation of China (Grant No. 60502044)Program for New Century Excellent Talents inUniversity (Grant No. NCET-06-0861)
文摘A new approach for unparallel trajectory bistatic spotlight SAR imaging is proposed. The approach utilizes the concept of instantaneous Doppler wavenumber and introduces two variants, the sum-range and subtraction-range, to develop the 2D frequency analytical formula. Based on the assumption of plane wavefront, the transmitting and receiving Doppler are separated and formulated via series reversion. And frequency scaling is applied to focus image. The algorithm is with high computational efficiency, and provides well focus for limited scene imaging. Simulation result confirms the validity of the approach.
基金supported by the National Natural Science Foundation of China (Grant 51179189)the National Basic Research 973 Program of China (Grant 2013CB036003)+2 种基金the Program for New Century Excellent Talents in University (Grant NCET-120961)Outstanding Innovation Team Project in China University of Mining and Technology (Grant 2014QN002)the Fundamental Research Funds for the Central Universities (Grants 2014YC10 and 2014XT03)
文摘Strength and deformability characteristics of rock with pre-existing fissures are governed by cracking behavior. To further research the effects of pre-existing fissures on the mechanical properties and crack coalescence process, a series of uniaxial compression tests were carried out for rock-like material with two unparallel fissures.In the present study, cement, quartz sand, and water were used to fabricate a kind of brittle rock-like material cylindrical model specimen. The mechanical properties of rock-like material specimen used in this research were all in good agreement with the brittle rock materials. Two unparallel fissures（a horizontal fissure and an inclined fissure） were created by inserting steel during molding the model specimen.Then all the pre-fissured rock-like specimens were tested under uniaxial compression by a rock mechanics servocontrolled testing system. The peak strength and Young＇s modulus of pre-fissured specimen all first decreased and then increased when the fissure angle increased from 0？to 75？.In order to investigate the crack initiation, propagation and coalescence process, photographic monitoring was adopted to capture images during the entire deformation process.Moreover, acoustic emission（AE） monitoring technique was also used to obtain the AE evolution characteristic of prefissured specimen. The relationship between axial stress, AE events, and the crack coalescence process was set up： when a new crack was initiated or a crack coalescence occurred, thecorresponding axial stress dropped in the axial stress–time curve and a big AE event could be observed simultaneously.Finally, the mechanism of crack propagation under microscopic observation was discussed. These experimental results are expected to increase the understanding of the strength failure behavior and the cracking mechanism of rock containing unparallel fissures.
文摘To solve the problem of finishing the twist blade surface of an impeller, the five-axis numerically controlled electrochemical contour evolution grinding （NC-ECCEG） is studied. Over-cutting errors of NC-ECCEG of the twist blade surface generated by parallel lines are analyzed. The formula for calculating the over-cutting error is deduced. The method for eliminating the over-cutting error is used in the conical grinding wheel and the combined five-axis linkage NC-ECCEG system. The structure and the movement of the NC-ECCEG machine tool,the combined multi-axis NC system and its linkage control technology are introduced. Further, the mathematical model of the NC-ECCEG unparallel-ruled surface is established. An auto-programming system on five-axis NGECCEG is developed to grind the impeller. The machining efficiency of NC-ECCEG increases more than 12 times than that of manual polishing operations.
