The 3 D non isothermal flow of non Newtonian viscous polymer melt in a co rotating twin screw extruder is modeled. The distributions of the velocity, temperature, pressure and the viscous dissipation in the fl...The 3 D non isothermal flow of non Newtonian viscous polymer melt in a co rotating twin screw extruder is modeled. The distributions of the velocity, temperature, pressure and the viscous dissipation in the flow domain are presented by using a fluid dynamics analysis package (Polyflow). The numerical results show that the temperatures are high in the intermeshing region and on the screw surface, the maximum pressure and the minimum pressure occur in the intermeshing region, and the flow rate is almost proportional to the screw speed.展开更多
The pressure increasing process within a twin screw multiphase pump, under the condition of high gas volume fractions (GVFs), induces large temperature and pressure changes that cause the rotors to deform. Rotor defor...The pressure increasing process within a twin screw multiphase pump, under the condition of high gas volume fractions (GVFs), induces large temperature and pressure changes that cause the rotors to deform. Rotor deformations heavily influence the backflow of the multiphase fluid through clearances within the twin screw multiphase pump and these deformations may even lead to pump failures. An accurate temperature and pressure distribution on the screw rotors need be obtained before the deformation analysis can be carried out. By means of small temperature and pressure sensors embedded into the groove at the root of the rotors, the temperatures of 12 points on the rotors and the pressure distributions of a twin screw multiphase pump under high GVFs conditions were recorded. Temperature test results were adopted to perform a heat transfer analysis for determining the temperature distribution on the screw rotors. Then deformation analyses, including thermal deformation, force deformation, and total deformation, were conducted according to the pressure and temperature distributions. Deformation analysis for different materials was also conducted under the same boundary conditions. A material was suggested for the manufacturing of rotors in a twin screw multiphase pump under the condition of high gas volume fractions.展开更多
文摘The 3 D non isothermal flow of non Newtonian viscous polymer melt in a co rotating twin screw extruder is modeled. The distributions of the velocity, temperature, pressure and the viscous dissipation in the flow domain are presented by using a fluid dynamics analysis package (Polyflow). The numerical results show that the temperatures are high in the intermeshing region and on the screw surface, the maximum pressure and the minimum pressure occur in the intermeshing region, and the flow rate is almost proportional to the screw speed.
基金Project supported by the National High-Tech R&D Program (863) of China (No. 2007AA05Z208)the Scientific Research Foundation for Returned Scholars (No. 50706034), China
文摘The pressure increasing process within a twin screw multiphase pump, under the condition of high gas volume fractions (GVFs), induces large temperature and pressure changes that cause the rotors to deform. Rotor deformations heavily influence the backflow of the multiphase fluid through clearances within the twin screw multiphase pump and these deformations may even lead to pump failures. An accurate temperature and pressure distribution on the screw rotors need be obtained before the deformation analysis can be carried out. By means of small temperature and pressure sensors embedded into the groove at the root of the rotors, the temperatures of 12 points on the rotors and the pressure distributions of a twin screw multiphase pump under high GVFs conditions were recorded. Temperature test results were adopted to perform a heat transfer analysis for determining the temperature distribution on the screw rotors. Then deformation analyses, including thermal deformation, force deformation, and total deformation, were conducted according to the pressure and temperature distributions. Deformation analysis for different materials was also conducted under the same boundary conditions. A material was suggested for the manufacturing of rotors in a twin screw multiphase pump under the condition of high gas volume fractions.
