Cu47Ti33Zr11Ni6Sn2Si1-based bulk metallic glass matrix composites reinforced with tungsten wires were fabricated by infiltration process at different temperatures （850, 900, 950 and 1000 °C） and time （10, 20 a...Cu47Ti33Zr11Ni6Sn2Si1-based bulk metallic glass matrix composites reinforced with tungsten wires were fabricated by infiltration process at different temperatures （850, 900, 950 and 1000 °C） and time （10, 20 and 30 min） in a quartz or a steel tube. The mechanical tests were carried out by scanning electron microscopy （SEM） and X-ray diffraction （XRD）. The results show that the maximum strength and total strain of the composite are 1778 MPa and 2.8% fabricated in steel tube at 900 °C for 10 min, and 1582 MPa and 3.6% fabricated in quartz tube at 850 °C for 10 min, respectively.展开更多
In the present study nano-tungsten carbide particles were generated in a wire explosion process.The plasma generated during the wire explosion process was analyzed using optical emission spectroscopy（OES）.The impact...In the present study nano-tungsten carbide particles were generated in a wire explosion process.The plasma generated during the wire explosion process was analyzed using optical emission spectroscopy（OES）.The impact of ambient pressure on the plasma temperature,electron density and plasma lifetime was studied.Lifetime variations of the plasma produced under different experimental conditions were analyzed.The produced nanoparticles were characterized through wide angle X-ray diffraction（WAXD） and transmission electron microscopy（TEM） studies. Particles produced with a negative DC charging voltage had a larger mean size when compared to a positive charging voltage.Polarity dependence on the plasma duration was observed where plasma was sustained for a longer duration with a negative DC charging voltage.展开更多
文摘Cu47Ti33Zr11Ni6Sn2Si1-based bulk metallic glass matrix composites reinforced with tungsten wires were fabricated by infiltration process at different temperatures （850, 900, 950 and 1000 °C） and time （10, 20 and 30 min） in a quartz or a steel tube. The mechanical tests were carried out by scanning electron microscopy （SEM） and X-ray diffraction （XRD）. The results show that the maximum strength and total strain of the composite are 1778 MPa and 2.8% fabricated in steel tube at 900 °C for 10 min, and 1582 MPa and 3.6% fabricated in quartz tube at 850 °C for 10 min, respectively.
文摘In the present study nano-tungsten carbide particles were generated in a wire explosion process.The plasma generated during the wire explosion process was analyzed using optical emission spectroscopy（OES）.The impact of ambient pressure on the plasma temperature,electron density and plasma lifetime was studied.Lifetime variations of the plasma produced under different experimental conditions were analyzed.The produced nanoparticles were characterized through wide angle X-ray diffraction（WAXD） and transmission electron microscopy（TEM） studies. Particles produced with a negative DC charging voltage had a larger mean size when compared to a positive charging voltage.Polarity dependence on the plasma duration was observed where plasma was sustained for a longer duration with a negative DC charging voltage.
