The ratio and sensitivity of giant magnetoimpedance （GMI） in grain oriented silicon steels （Fe-4.5%Si） are improved after furnace annealing in air for 20 min. By annealing at 800℃, the GMI sensitivity rises from ...The ratio and sensitivity of giant magnetoimpedance （GMI） in grain oriented silicon steels （Fe-4.5%Si） are improved after furnace annealing in air for 20 min. By annealing at 800℃, the GMI sensitivity rises from 1.29%/Oe to 1.91%/Oe and the ratio increases from 237% to 294% with decreasing characteristic frequency. The results are attributable to an increase in the transverse magnetic permeability during the heat treatment. From simulation by finite element method, the GMI effect can be interpreted as the modification of the current distribution by the applied magnetic field via the transverse permeability. In the case of annealed samples,the larger transverse permeability allows a higher GMI ratio and sensitivity.展开更多
To study the resin flow and the permeability in fabric preforms during the liquid composite molding( LCM) process,influences of stitch and overlay placement styles on the internal flow behavior in-plane and transverse...To study the resin flow and the permeability in fabric preforms during the liquid composite molding( LCM) process,influences of stitch and overlay placement styles on the internal flow behavior in-plane and transverse were investigated. The permeability tests were carried using unidirectional and biaxial noncrimp carbon fabric( NCF) by linear capacitance sensors and ultrasound monitor system. The results indicate that the internal flow behavior and permeability in plane with different stitch and overlay placement styles are significantly different. When flow channels formed by stitches penetrate along the fiber direction,the permeability is high in one direction, which makes the in-plane principle permeabilities K_1 and K_2 significantly different. When there is an angle between the flow channel and fiber direction,the in-plane principle permeabilities on all directions are nearly the same and the flow process is close to isotropy. As to transverse permeability,the exist of flow channels on thickness influences it greatly and it is about 1-2 orders of magnitude lower in unidirectional fabric than that in biaxial NCF.展开更多
To better describe excavation operations in deep geological formations,several aspects should be considered,especially the material anisotropy,time-dependent behavior,and hydromechanical coupling.In the present paper,...To better describe excavation operations in deep geological formations,several aspects should be considered,especially the material anisotropy,time-dependent behavior,and hydromechanical coupling.In the present paper,a hydromechanical model based on the framework of continuous porous media was proposed.The mechanical elasto-viscoplastic constitutive model accounted for the material elastic and non-elastic anisotropies,using a transformation between the real transversely isotropic material and a fictitious isotropic material.Considering the hydraulic behavior,the permeability was expressed as a function of the volumetric viscoplastic strain.The model was applied to a case study of two tunnel excavations in an anisotropic rock under an initial anisotropic stress state.The results of the numerical simulations using a finite element code were in good agreement with the field convergence and permeability data.展开更多
This paper aims to study and analyze the electromagnetic propagation in media with negative transverse permeability and how this leads into some physical phenomena such as the appearance of backward waves and the prop...This paper aims to study and analyze the electromagnetic propagation in media with negative transverse permeability and how this leads into some physical phenomena such as the appearance of backward waves and the propagation below cutoff. This study is done through the use of metamaterials of split ring resonators. It is shown that the waveguide dimensions needed to transmit a certain frequency band, can be miniaturized to half its dimension. The analytical determination of the propagation inside a waveguide in the presence of two slabs with dielectric permittivity and negative transverse permeability is derived. Finally it is shown by simulation, how to obtain a backward wave with lower loss than reported earlier in the literature.展开更多
基金supported by Walailak University s research unit fund
文摘The ratio and sensitivity of giant magnetoimpedance （GMI） in grain oriented silicon steels （Fe-4.5%Si） are improved after furnace annealing in air for 20 min. By annealing at 800℃, the GMI sensitivity rises from 1.29%/Oe to 1.91%/Oe and the ratio increases from 237% to 294% with decreasing characteristic frequency. The results are attributable to an increase in the transverse magnetic permeability during the heat treatment. From simulation by finite element method, the GMI effect can be interpreted as the modification of the current distribution by the applied magnetic field via the transverse permeability. In the case of annealed samples,the larger transverse permeability allows a higher GMI ratio and sensitivity.
基金National Natural Science Foundation of China(No.11472077)Shanghai Natural Science Foundation,China(No.13ZR1400500)+1 种基金the Fundamental Research Funds for the Central Universities,China(No.2232015D3-01)Innovation Experiment Programs for University Students,China(Nos.201410255024,201510255118)
文摘To study the resin flow and the permeability in fabric preforms during the liquid composite molding( LCM) process,influences of stitch and overlay placement styles on the internal flow behavior in-plane and transverse were investigated. The permeability tests were carried using unidirectional and biaxial noncrimp carbon fabric( NCF) by linear capacitance sensors and ultrasound monitor system. The results indicate that the internal flow behavior and permeability in plane with different stitch and overlay placement styles are significantly different. When flow channels formed by stitches penetrate along the fiber direction,the permeability is high in one direction, which makes the in-plane principle permeabilities K_1 and K_2 significantly different. When there is an angle between the flow channel and fiber direction,the in-plane principle permeabilities on all directions are nearly the same and the flow process is close to isotropy. As to transverse permeability,the exist of flow channels on thickness influences it greatly and it is about 1-2 orders of magnitude lower in unidirectional fabric than that in biaxial NCF.
文摘To better describe excavation operations in deep geological formations,several aspects should be considered,especially the material anisotropy,time-dependent behavior,and hydromechanical coupling.In the present paper,a hydromechanical model based on the framework of continuous porous media was proposed.The mechanical elasto-viscoplastic constitutive model accounted for the material elastic and non-elastic anisotropies,using a transformation between the real transversely isotropic material and a fictitious isotropic material.Considering the hydraulic behavior,the permeability was expressed as a function of the volumetric viscoplastic strain.The model was applied to a case study of two tunnel excavations in an anisotropic rock under an initial anisotropic stress state.The results of the numerical simulations using a finite element code were in good agreement with the field convergence and permeability data.
文摘This paper aims to study and analyze the electromagnetic propagation in media with negative transverse permeability and how this leads into some physical phenomena such as the appearance of backward waves and the propagation below cutoff. This study is done through the use of metamaterials of split ring resonators. It is shown that the waveguide dimensions needed to transmit a certain frequency band, can be miniaturized to half its dimension. The analytical determination of the propagation inside a waveguide in the presence of two slabs with dielectric permittivity and negative transverse permeability is derived. Finally it is shown by simulation, how to obtain a backward wave with lower loss than reported earlier in the literature.
