利用太赫兹时域光谱(terahertz time domain spectroscopy,简称THz-TDS),研究了亚波长金属分形结构在THz波段的透射增强特性.分别从实验和理论两个方面,研究了铜箔上各级分形结构THz透射增强现象的产生机理.结果表明,在低频区的透射增...利用太赫兹时域光谱(terahertz time domain spectroscopy,简称THz-TDS),研究了亚波长金属分形结构在THz波段的透射增强特性.分别从实验和理论两个方面,研究了铜箔上各级分形结构THz透射增强现象的产生机理.结果表明,在低频区的透射增强主要是由低级分形线中电子运动的共振引起的,而高频区的透射增强则主要由高级分形线中电子运动的共振引起的.从而将这种透射增强效应归结为分形结构中电子的共振辐射,即分形结构的局域共振效应.展开更多
For the purpose of engineering development for a new 8-step speed automatic transmission,a simplified dynamic model for this gearbox was established and key parameters which affected the shift quality were analyzed.Ai...For the purpose of engineering development for a new 8-step speed automatic transmission,a simplified dynamic model for this gearbox was established and key parameters which affected the shift quality were analyzed.Aiming at four different shift types,the ideal characteristics of shift clutch and engine control were set up.By using torque estimation method,PI slip control algorithm and engine coordinated control principle,the control model and transmission controller were well developed for three shift phases which included rapid-fill phase,torque phase and inertia phase.The testing environment on the rig and prototype vehicle level was built and the testing results obtained in ultimate condition could verify the accuracy and feasibility of this shift control strategy.The peak jerk during shift process was controlled within ±2 g/s where the smooth gearshift was obtained.The development proposal and algorithm have a high value for engineering application.展开更多
The equivalent electrical circuit model of a bundled single-walled carbon nanotube based distributed RLC interconnects is employed for the crosstalk analysis. The accurate time domain analysis and crosstalk effect in ...The equivalent electrical circuit model of a bundled single-walled carbon nanotube based distributed RLC interconnects is employed for the crosstalk analysis. The accurate time domain analysis and crosstalk effect in the VLSI interconnect has emerged as an essential design criteria. This paper presents a brief description of the numerical method based finite difference time domain （FDTD） technique that is intended for estimation of voltages and currents on coupled transmission lines. For the FDTD implementation, the stability of the proposed model is strictly restricted by the Courant condition. This method is used for the estimation of crosstalk induced propagation delay and peak voltage in lossy RLC interconnects. Both functional and dynamic crosstalk effects are analyzed in the coupled transmission line. The effect of line resistance on crosstalk induced delay, and peak voltage under dynamic and functional crosstalk is also evaluated. The FDTD analysis and the SPICE simulations are carried out at 32 nm technology node for the global interconnects. It is observed that the analytical results obtained using the FDTD technique are in good agreement with the SPICE simulation results. The crosstalk induced delay, propagation delay, and peak voltage obtained using the FDTD technique shows average errors of 4.9%, 3.4% and 0.46%, respectively, in comparison to SPICE.展开更多
The output characteristics of GaAs cell are keys for the laser wireless power transmission system design. The measurement platform for the output characteristics of GaAs cell is established by single-junction GaAs cel...The output characteristics of GaAs cell are keys for the laser wireless power transmission system design. The measurement platform for the output characteristics of GaAs cell is established by single-junction GaAs cell and 1064 nm fiber laser. The influence rules of laser power and temperature on the short-circuit current, open-circuit voltage, peak power, fill factor, and conversion efficiency are measured. The measurement results show that the conversion efficiency firstly increases and then decreases with an increase in laser power, and reaches a maximum of 54.5% at the laser power of 0.405 W, whereas the conversion efficiency decreases with an increase in temperature, and decreases slowly with an increase in laser power.展开更多
An efficient image transmission scheme is proposed based on byte partition and adaptive sub-channel distribution technique in Filtered MultiTone (FMT) system over frequency selective slow fading channel. According to ...An efficient image transmission scheme is proposed based on byte partition and adaptive sub-channel distribution technique in Filtered MultiTone (FMT) system over frequency selective slow fading channel. According to the simulation results and analysis of a typical image with matlab, improvement in Peak Signal to Noise Ratio (PSNR) of the received image and low complexity for equalization is demonstrated remarkably. Comparing with no adaptive and no actual channel equalization scheme, the proposed scheme saves over 6 dB when PSNR=40 dB.展开更多
文摘利用太赫兹时域光谱(terahertz time domain spectroscopy,简称THz-TDS),研究了亚波长金属分形结构在THz波段的透射增强特性.分别从实验和理论两个方面,研究了铜箔上各级分形结构THz透射增强现象的产生机理.结果表明,在低频区的透射增强主要是由低级分形线中电子运动的共振引起的,而高频区的透射增强则主要由高级分形线中电子运动的共振引起的.从而将这种透射增强效应归结为分形结构中电子的共振辐射,即分形结构的局域共振效应.
基金Project(51105017) supported by the National Natural Science Foundation of ChinaProject(2011BAG09B00) supported by the National Science and Technology Support Program of ChinaProject(2010DFB80020) supported by the Technology Major Project of the Ministry of Science and Technology of China
文摘For the purpose of engineering development for a new 8-step speed automatic transmission,a simplified dynamic model for this gearbox was established and key parameters which affected the shift quality were analyzed.Aiming at four different shift types,the ideal characteristics of shift clutch and engine control were set up.By using torque estimation method,PI slip control algorithm and engine coordinated control principle,the control model and transmission controller were well developed for three shift phases which included rapid-fill phase,torque phase and inertia phase.The testing environment on the rig and prototype vehicle level was built and the testing results obtained in ultimate condition could verify the accuracy and feasibility of this shift control strategy.The peak jerk during shift process was controlled within ±2 g/s where the smooth gearshift was obtained.The development proposal and algorithm have a high value for engineering application.
文摘The equivalent electrical circuit model of a bundled single-walled carbon nanotube based distributed RLC interconnects is employed for the crosstalk analysis. The accurate time domain analysis and crosstalk effect in the VLSI interconnect has emerged as an essential design criteria. This paper presents a brief description of the numerical method based finite difference time domain （FDTD） technique that is intended for estimation of voltages and currents on coupled transmission lines. For the FDTD implementation, the stability of the proposed model is strictly restricted by the Courant condition. This method is used for the estimation of crosstalk induced propagation delay and peak voltage in lossy RLC interconnects. Both functional and dynamic crosstalk effects are analyzed in the coupled transmission line. The effect of line resistance on crosstalk induced delay, and peak voltage under dynamic and functional crosstalk is also evaluated. The FDTD analysis and the SPICE simulations are carried out at 32 nm technology node for the global interconnects. It is observed that the analytical results obtained using the FDTD technique are in good agreement with the SPICE simulation results. The crosstalk induced delay, propagation delay, and peak voltage obtained using the FDTD technique shows average errors of 4.9%, 3.4% and 0.46%, respectively, in comparison to SPICE.
基金This project is supported by the National Natural Science Foundation of China （Grant No. 11647096） and the Inner Mongolia Natural Science Foundation （Grant No. 2016BS0102）.
文摘The output characteristics of GaAs cell are keys for the laser wireless power transmission system design. The measurement platform for the output characteristics of GaAs cell is established by single-junction GaAs cell and 1064 nm fiber laser. The influence rules of laser power and temperature on the short-circuit current, open-circuit voltage, peak power, fill factor, and conversion efficiency are measured. The measurement results show that the conversion efficiency firstly increases and then decreases with an increase in laser power, and reaches a maximum of 54.5% at the laser power of 0.405 W, whereas the conversion efficiency decreases with an increase in temperature, and decreases slowly with an increase in laser power.
文摘An efficient image transmission scheme is proposed based on byte partition and adaptive sub-channel distribution technique in Filtered MultiTone (FMT) system over frequency selective slow fading channel. According to the simulation results and analysis of a typical image with matlab, improvement in Peak Signal to Noise Ratio (PSNR) of the received image and low complexity for equalization is demonstrated remarkably. Comparing with no adaptive and no actual channel equalization scheme, the proposed scheme saves over 6 dB when PSNR=40 dB.
