Due to the dispersed distribution of the titanium component in various mineral phases and very fine grain size, it is difficult to recover the titanium component from the slag. In order to utilize titanium resources, ...Due to the dispersed distribution of the titanium component in various mineral phases and very fine grain size, it is difficult to recover the titanium component from the slag. In order to utilize titanium resources, selective enriching and selective growing of the titanium component from the molten slag is expected. In this paper, the selection of the best titanium enrichment phase and the effect of oxidization on the enrichment of titanium by blowing air into the molten slag were studied. The results showed that through oxidizing the slag, the content of the perovskite phase increases while that of the other titanium-bearing mineral phases decreases until they disappear. Most titania resources were enriched into the perovskite phase and increase in size. The process of enrichment and growth is easily carried out.展开更多
This study involved the investigation of the effects of the continuous cooling process conditions on the crystallization and liberation characteristics of anosovite in Ti-bearing titanomagnetite smelting slag. The sam...This study involved the investigation of the effects of the continuous cooling process conditions on the crystallization and liberation characteristics of anosovite in Ti-bearing titanomagnetite smelting slag. The samples were heated until melting and then the temperature was held at 1650℃ for nearly 0.5 h;subsequently, the samples were cooled at different cooling rates to different temperatures and water-quenched after being held for different times at these temperatures. Last, the obtained crystallized samples were used to analyze the crystallization and liberation characteristics. It was found that, during the continuous cooling process, anosovite particles were found to initially precipitate in the slag at a relatively high crystallization temperature, showing the characteristics of euhedral crystal. The precipitation and growth of anosovite grain is strong and the morphology of anosovite was basically not affected by the continuous cooling conditions. From the morphology perspective, the formed anosovite is an excellent Ti-rich phase to be selective separated. The formation of spinel and diopside is negative for the liberation and selective separation of the anosovite phase. The crystallization diagrams of TiO2-MgO-CaO-SiO2-Al2O3-FeO slag undergoing different continuous cooling processes were constructed to help to determine the optimal continuous cooling–quenching condition for selective separation of anosovite. Moreover, the addition of B2O3 can enlarge the range of the optimal continuous cooling–quenching conditions for selective separation of anosovite.展开更多
基金This work was financially supported by the National Natural Science Foundation of China (No.50234040)
文摘Due to the dispersed distribution of the titanium component in various mineral phases and very fine grain size, it is difficult to recover the titanium component from the slag. In order to utilize titanium resources, selective enriching and selective growing of the titanium component from the molten slag is expected. In this paper, the selection of the best titanium enrichment phase and the effect of oxidization on the enrichment of titanium by blowing air into the molten slag were studied. The results showed that through oxidizing the slag, the content of the perovskite phase increases while that of the other titanium-bearing mineral phases decreases until they disappear. Most titania resources were enriched into the perovskite phase and increase in size. The process of enrichment and growth is easily carried out.
基金financially supported by the National Natural Science Foundation of China (Nos. 51404226 and 21736010)
文摘This study involved the investigation of the effects of the continuous cooling process conditions on the crystallization and liberation characteristics of anosovite in Ti-bearing titanomagnetite smelting slag. The samples were heated until melting and then the temperature was held at 1650℃ for nearly 0.5 h;subsequently, the samples were cooled at different cooling rates to different temperatures and water-quenched after being held for different times at these temperatures. Last, the obtained crystallized samples were used to analyze the crystallization and liberation characteristics. It was found that, during the continuous cooling process, anosovite particles were found to initially precipitate in the slag at a relatively high crystallization temperature, showing the characteristics of euhedral crystal. The precipitation and growth of anosovite grain is strong and the morphology of anosovite was basically not affected by the continuous cooling conditions. From the morphology perspective, the formed anosovite is an excellent Ti-rich phase to be selective separated. The formation of spinel and diopside is negative for the liberation and selective separation of the anosovite phase. The crystallization diagrams of TiO2-MgO-CaO-SiO2-Al2O3-FeO slag undergoing different continuous cooling processes were constructed to help to determine the optimal continuous cooling–quenching condition for selective separation of anosovite. Moreover, the addition of B2O3 can enlarge the range of the optimal continuous cooling–quenching conditions for selective separation of anosovite.
