Laser cladding experiments were done on a 5-kW continuous wave CO2 laser to synthesize TiC and TiB rein- fowed titanium matrix composite coatings on Ti-6AI-4V alloy with a mixture of Ti and B4C precursor powder. The t...Laser cladding experiments were done on a 5-kW continuous wave CO2 laser to synthesize TiC and TiB rein- fowed titanium matrix composite coatings on Ti-6AI-4V alloy with a mixture of Ti and B4C precursor powder. The ther- modynamics of the reactions were calculated and analyzed. The microstructure and phase evolution of TiB and TiC com- posites were investigated. The results showed that the chemical reaction between Ti and B4C would release much heat, and these compounds, TiC, TiB, and small amount of TiB2, can be formed on the surface of Ti-6AI-4V alloy if the supplied en- ergy is sufficient to excite the reaction among the initial products. A good metallurgical bond between the coating and the substrate can be achieved. The microhardness of coating was irregular and the maximum value was approximately HV600.展开更多
Tubes of 3.5 vol,% TiB whiskers reinforced Ti6Al4V matrix composites （TiBw/Ti6Al4V） were successfully fabricated by a two-step hot-hydrostatic extrusion process： （3 extrusion at 1100 ℃ and subsequent near-β extr...Tubes of 3.5 vol,% TiB whiskers reinforced Ti6Al4V matrix composites （TiBw/Ti6Al4V） were successfully fabricated by a two-step hot-hydrostatic extrusion process： （3 extrusion at 1100 ℃ and subsequent near-β extrusion at 950℃. The dimensions of tubes were about 7 mm in diameter and 2 mm in thickness. A refined basket-weave structure in Ti6Al4V matrix was achieved at ambient temperature after the extrusion process. Besides, the original network structure formed by TiB whiskers synthesized was broken, while the TiB whiskers were preferentially aligned in the extruding direction. Meanwhile, a fibrous texture was evolved finally, resulting from partial dynamic recrystallization during the β extrusion and the involvement of α phase during the near-β extrusion. The tensile and compressive tests results showed that both the strength and ductility of the tubes were significantly improved. In particular, the tubes exhibited good mechanical properties at elevated temperatures.展开更多
基金financially supported by the National "973" Research Project (No. 2006CB605206-1)
文摘Laser cladding experiments were done on a 5-kW continuous wave CO2 laser to synthesize TiC and TiB rein- fowed titanium matrix composite coatings on Ti-6AI-4V alloy with a mixture of Ti and B4C precursor powder. The ther- modynamics of the reactions were calculated and analyzed. The microstructure and phase evolution of TiB and TiC com- posites were investigated. The results showed that the chemical reaction between Ti and B4C would release much heat, and these compounds, TiC, TiB, and small amount of TiB2, can be formed on the surface of Ti-6AI-4V alloy if the supplied en- ergy is sufficient to excite the reaction among the initial products. A good metallurgical bond between the coating and the substrate can be achieved. The microhardness of coating was irregular and the maximum value was approximately HV600.
基金Program of Introducing Talents of Discipline to Universities(B08040)National Nature Science Foundation of China(51071122,51271147,51201134)+1 种基金Fundamental Research Funds for the Central Universities(3102014JCQ01023)Foundation of the Doctoral Scientific Research of Baoji University of Arts and Sciences(ZK2017020,ZK2017022)
基金Projects (51101042, 51271064) supported by the National Natural Science Foundation of ChinaProject (HIT. NSRIF. 201131) supported by the Fundamental Research Funds for the Central Universities, China+1 种基金Projects (2012T50327, 2011M500653) supported by the China Postdoctoral Science FoundationProject supported by the Postdoctoral Science Foundation of Heilongjiang Province, China
基金financially supported by the National HighTech Research and Development Program of China("863 Program",No.2013AA031202)
文摘Tubes of 3.5 vol,% TiB whiskers reinforced Ti6Al4V matrix composites （TiBw/Ti6Al4V） were successfully fabricated by a two-step hot-hydrostatic extrusion process： （3 extrusion at 1100 ℃ and subsequent near-β extrusion at 950℃. The dimensions of tubes were about 7 mm in diameter and 2 mm in thickness. A refined basket-weave structure in Ti6Al4V matrix was achieved at ambient temperature after the extrusion process. Besides, the original network structure formed by TiB whiskers synthesized was broken, while the TiB whiskers were preferentially aligned in the extruding direction. Meanwhile, a fibrous texture was evolved finally, resulting from partial dynamic recrystallization during the β extrusion and the involvement of α phase during the near-β extrusion. The tensile and compressive tests results showed that both the strength and ductility of the tubes were significantly improved. In particular, the tubes exhibited good mechanical properties at elevated temperatures.
基金Projects (51101042, 51271064) supported by the National Natural Science Foundation of ChinaProject (HIT. NSRIF. 201131) supported by the Fundamental Research Funds for the Central Universities+1 种基金Projects (2012T50327, 2011M500653) supported by the 5th-class Special Financial Grant and the 50th-class General Financial Grant from the China Postdoctoral Science FoundationProject supported by the Provincial Heilongjiang Postdoctoral Science Foundation, China
