Polyferric silicate sulfate （PFSS） with high concentration was prepared using the composite-poly method. The coagulation properties and mechanisms of this new complex were probed using TEM, Fe-Ferron timed complex-c...Polyferric silicate sulfate （PFSS） with high concentration was prepared using the composite-poly method. The coagulation properties and mechanisms of this new complex were probed using TEM, Fe-Ferron timed complex-colorimetric method, and infrared spectrum method. The results showed that the flocculating effect of polyferric silicate sulfate had an advantage over polyferric sulfate （PFS）, as the optimum coagulation effect could be obtained when the Si/Fe mole ratio was 0.75 in accordance with its macrostructure of PFSS. According to the Fe-Ferron timed complex-colorimetric method, the Si species was mainly Sic, whereas, the Fe species were Fea and Fec in the copolymerization system. The infrared spectra indicated that the structure of these new flocculants was formed by polymers, mainly by olation, which was different from polyferric sulfate, and the vibration of M-OH-M of around 1100 cm^-1, also proved that there existed Fe-OH-Fe and its polymers in some forms.展开更多
The effects of the calorimetric buffer solutions were investigated while the two colorimetric reactions of AI-ferron complex and Fe-ferron complex occurred individually, and the effects of the testing wavelength and t...The effects of the calorimetric buffer solutions were investigated while the two colorimetric reactions of AI-ferron complex and Fe-ferron complex occurred individually, and the effects of the testing wavelength and the pH of the solutions were also investigated. A timed complexatian colorimetric analysis method of Al-Fe-ferron in view of the total concentration of {AI + Fe} was then established to determine the species distribution of polymeric Al-Fe. The testing wavelength was recommended at 362 net and the testing pH value was 5. With a comparison of the ratios of n(Al)/n(Fe), the standard adsorption curves of the polymeric Al-Fe solutions were derived from the experimental results. Furthermore, the solutions' composition were carious in both the molar n(Al)/n(Fe) ratios, i.e. 0/0, 5/5, 9/1 and 0/10, and the concentrations associated with the total ( Al + Fe which ranged from 10(-5) to 10(-4) mol/L..展开更多
In response to the production capacity and functionality variations, a genetic algorithm （GA） embedded with deterministic timed Petri nets（DTPN） for reconfigurable production line（RPL） is proposed to solve its s...In response to the production capacity and functionality variations, a genetic algorithm （GA） embedded with deterministic timed Petri nets（DTPN） for reconfigurable production line（RPL） is proposed to solve its scheduling problem. The basic DTPN modules are presented to model the corresponding variable structures in RPL, and then the scheduling model of the whole RPL is constructed. And in the scheduling algorithm, firing sequences of the Petri nets model are used as chromosomes, thus the selection, crossover, and mutation operator do not deal with the elements in the problem space, but the elements of Petri nets model. Accordingly, all the algorithms for GA operations embedded with Petri nets model are proposed. Moreover, the new weighted single-objective optimization based on reconfiguration cost and E/T is used. The results of a DC motor RPL scheduling suggest that the presented DTPN-GA scheduling algorithm has a significant impact on RPL scheduling, and provide obvious improvements over the conventional scheduling method in practice that meets duedate, minimizes reconfiguration cost, and enhances cost effectivity.展开更多
UML is a widely-used, general purpose modeling language. But its lack of a rigorous semantics forbids the thorough analysis of designed solution, and thus precludes the discovery of significant problems at design time...UML is a widely-used, general purpose modeling language. But its lack of a rigorous semantics forbids the thorough analysis of designed solution, and thus precludes the discovery of significant problems at design time. To bridge the gap, the paper investigates the underlying semantics of UML state machine diagrams, along with the time-related modeling elements of MARTE, the profile for modeling and analysis of real-time embedded systems, and proposes a formal operational semantics based on extended hierarchical timed automata. The approach is exemplified on a simple example taken from the automotive domain. Verification is accomplished by translating designed models into the input language of the UPPAAL model checker.展开更多
Mobile ad hoc networking （MANET） has become an exciting and important technology in recent years, because of the rapid proliferation of wireless devices. Mobile ad hoc networks is highly vulnerable to attacks due to...Mobile ad hoc networking （MANET） has become an exciting and important technology in recent years, because of the rapid proliferation of wireless devices. Mobile ad hoc networks is highly vulnerable to attacks due to the open medium, dynamically changing network topology, cooperative algorithms, and lack of centralized monitoring and management point. The traditional way of protecting networks with firewalls and encryption software is no longer sufficient and effective for those features. A distributed intrusion detection approach based on timed automata is given. A cluster-based detection scheme is presented, where periodically a node is elected as the monitor node for a cluster. These monitor nodes can not only make local intrusion detection decisions, but also cooperatively take part in global intrusion detection. And then the timed automata is constructed by the way of manually abstracting the correct behaviours of the node according to the routing protocol of dynamic source routing （DSR）. The monitor nodes can verify the behaviour of every nodes by timed automata, and validly detect real-time attacks without signatures of intrusion or trained data. Compared with the architecture where each node is its own IDS agent, the approach is much more efficient while maintaining the same level of effectiveness. Finally, the intrusion detection method is evaluated through simulation experiments.展开更多
Interoperability testing is an important technique to ensure the quality of implementations of network communication protocol. In the next generation Internet protocol, real-time applications should be supported effec...Interoperability testing is an important technique to ensure the quality of implementations of network communication protocol. In the next generation Internet protocol, real-time applications should be supported effectively. However, time constraints were not considered in the related studies of protocol interoperability testing, so existing interoperability testing methods are difficult to be applied in real-time protocol interoperability testing. In this paper, a formal method to real-time protocol interoperability testing is proposed. Firstly, a formal model CMpTIOA （communicating multi-port timed input output automata） is defined to specify the system under test （SUT） in real-time protocol interoperability testing; based on this model, timed interoperability relation is then defined. In order to check this relation, a test generation method is presented to generate a parameterized test behavior tree from SUT model; a mechanism of executability pre-determination is also integrated in the test generation method to alleviate state space explosion problem to some extent. The proposed theory and method are then applied in interoperability testing of IPv6 neighbor discovery protocol to show the feasibility of this method.展开更多
BACKGROUND Dysfunction in stroke patients has been a problem that we committed to solve and explore.Physical therapy has some effect to regain strength,balance,and coordination.However,it is not a complete cure,so we ...BACKGROUND Dysfunction in stroke patients has been a problem that we committed to solve and explore.Physical therapy has some effect to regain strength,balance,and coordination.However,it is not a complete cure,so we are trying to find more effective treatments.AIM To observe the effect of whole-body vibration training(WVT)on the recovery of balance and walking function in stroke patients,which could provide us some useful evidence for planning rehabilitation.METHODS The clinical data of 130 stroke participants who underwent conventional rehabilitation treatment in our hospital from January 2019 to August 2020 were retrospectively analyzed.The participants were divided into whole-body vibration training(WVT)group and non-WVT(NWVT)group according to whether they were given WVT.In the WVT group,routine rehabilitation therapy was combined with WVT by the Galileo Med L Plus vibration trainer at a frequency of 20 Hz and a vibration amplitude of 0+ACY-plusmn+ADs-5.2 mm,and in the NWVT group,routine rehabilitation therapy only was provided.The treatment course of the two groups was 4 wk.Before and after treatment,the Berg balance scale(BBS),3 m timed up-and-go test(TUGT),the maximum walking speed test(MWS),and upper limb functional reaching(FR)test were performed.RESULTS After 4 wk training,in both groups,the BBS score and the FR distance respectively increased to a certain amount(WVT=46.08±3.41 vs NWVT=40.22±3.75;WVT=20.48±2.23 vs NWVT=16.60±2.82),with P<0.05.Furthermore,in the WVT group,both BBS score and FR distance(BBS:18.32±2.18;FR:10.00±0.92)increased more than that in the NWVT group(BBS:13.29±1.66;FR:6.16±0.95),with P<0.05.Meanwhile,in both groups,the TUGT and the MWS were improved after training(WVT=32.64±3.81 vs NWVT=39.56±3.68;WVT=12.73±2.26 vs NWVT=15.04±2.27,respectively),with P<0.05.The change in the WVT group(TUGT:17.49±1.88;MWS:6.79±0.81)was greater than that in the NWVT group(TUGT:10.76±1.42;MWS:4.84±0.58),with P<0.05.CONCLUSION The WVT could effectively improve the balance and walking fu展开更多
A series of poly-aluminum-chloride-sulfate (PACS), which has different basicities (gamma) and Al3+/SO42- molar ratio, has been prepared and dried at 105degreesC and 65degreesC, respectively. The distribution of alumin...A series of poly-aluminum-chloride-sulfate (PACS), which has different basicities (gamma) and Al3+/SO42- molar ratio, has been prepared and dried at 105degreesC and 65degreesC, respectively. The distribution of aluminum species of PACS was examined, and the effect of 7 value, Al3+/SO42- molar ratio, dilution on the distribution of aluminum species of PACS was also investigated by using Al-ferron timed complex colorimetric method. The IR spectroscopy and X-ray diffraction were used to study the effect of gamma value, Al3+ / SO42- molar ratio and the drying temperature on the structure of PACS. The experimental results show that Al3+/SO42- molar ratio has a great effect on the distribution of aluminum species, but the dilution has a little effect on the distribution of aluminum species. The lower the Al3+/SO42- molar ratio, the higher the proportions of the polymer and colloidal species in PACS, The polymeric degree of PACS was related to gamma value and Al3+/SO(4)(2-)molar ratio. Drying temperature has an influence on the structure and the solubility of solid PACS products.展开更多
In many service delivery systems,the quantity of available resources is often a decisive factor of service quality.Resources can be personnel,offices,devices,supplies,and so on,depending on the nature of the services ...In many service delivery systems,the quantity of available resources is often a decisive factor of service quality.Resources can be personnel,offices,devices,supplies,and so on,depending on the nature of the services a system provides.Although service computing has been an active research topic for decades,general approaches that assess the impact of resource provisioning on service quality matrices in a rigorous way remain to be seen.Petri nets have been a popular formalism for modeling systems exhibiting behaviors of competition and concurrency for almost a half century.Stochastic timed Petri nets(STPN),an extension to regular Petri nets,are a powerful tool for system performance evaluation.However,we did not find any single existing STPN software tool that supports all timed transition firing policies and server types,not to mention resource provisioning and requirement analysis.This paper presents a generic and resource oriented STPN simulation engine that provides all critical features necessary for the analysis of service delivery system quality vs.resource provisioning.The power of the simulation system is illustrated by an application to emergency health care systems.展开更多
Lorenz-RR scatter plot has an obvious shortcoming in that it does not indicate the time when the scatter point happens.On the Lorenz RR scatter plot,one cannot know the time during which the cardiac rhythms take place...Lorenz-RR scatter plot has an obvious shortcoming in that it does not indicate the time when the scatter point happens.On the Lorenz RR scatter plot,one cannot know the time during which the cardiac rhythms take place.Since occurrence of cardiac rhythms is time-related,time should be introduced to such plots.In this study,time was used as abscissa and RR interval(the time interval between the previous RR wave and the R wave)as the ordinate and time was compressed into a visually observable length,and thereby a timed RR-interval scatter plot,or t-RR scatter plot,for short,was developed.On t-RR scatter plot,the patterns were band-shaped or were of linear type.On the t-RR plot,the sinus rhythm presented bands of various widths,with the spiculate or burred upper and lower boundaries,having diurnal variation.Premature beats showed separate layers(“stratification”),the layer number corresponding the number of RR-intervals.With simple premature beats,the layers were clearly separated.With parasystole rhythm,the upper and lower bands or layers might become thicker.With arial premature beats,the space or distance between layers varied.Ventricular premature beats presented equal space or distance between layers.With tachycardia,the lower layer became a“solid”layer.With atrial fibration,the“stratification”disappeared,presenting thicker or widened layers or bands,with neat lower boundary.With atrial flutter,the layers went parallel,with the layers being evenly separated or some distances being exact multiples of others.The second degree atrioventricular block displayed two layers,the lower and upper bands being equally away from the X-axis,presenting a straight line(pacing at a fixed rate)or a thicker or wider bands,with a neat upper boundary(the lowest pacing rate).When the scatter plot presented uncharacteristic patterns or had some scattered points,which rendered diagnosis difficult,a reverse technology could be used.Briefly,upon selection of scattered points,they were subjected to computerization,by regressio展开更多
A state/event fault tree(SEFT)is a modeling technique for describing the causal chains of events leading to failure in software-controlled complex systems.Such systems are ubiquitous in all areas of everyday life,and ...A state/event fault tree(SEFT)is a modeling technique for describing the causal chains of events leading to failure in software-controlled complex systems.Such systems are ubiquitous in all areas of everyday life,and safety and reliability analyses are increasingly required for these systems.SEFTs combine elements from the traditional fault tree with elements from state-based techniques.In the context of the real-time safety-critical systems,SEFTs do not describe the time properties and important timedependent system behaviors that can lead to system failures.Further,SEFTs lack the precise semantics required for formally modeling time behaviors.In this paper,we present a qualitative analysis method for SEFTs based on transformation from SEFT to timed automata(TA),and use the model checker UPPAAL to verify system requirements’properties.The combination of SEFT and TA is an important step towards an integrated design and verification process for real-time safety-critical systems.Finally,we present a case study of a powerboat autopilot system to confirm our method is viable and valid after achieving the verification goal step by step.展开更多
Al Ferron timed complex colorimetric method (AFM) and 27 Al NMR spectroscopy method(ANM) were discussed. For the former, the different colorimetric reagent preparation methods' results indicate that the...Al Ferron timed complex colorimetric method (AFM) and 27 Al NMR spectroscopy method(ANM) were discussed. For the former, the different colorimetric reagent preparation methods' results indicate that there are some differences beteween them, and the combined method can be used as a simplified procedure. For the latter, the small tube method is more accurate. Eventually, the Al 13 (ANM) was compared to the Al b (AFM).展开更多
文摘Polyferric silicate sulfate （PFSS） with high concentration was prepared using the composite-poly method. The coagulation properties and mechanisms of this new complex were probed using TEM, Fe-Ferron timed complex-colorimetric method, and infrared spectrum method. The results showed that the flocculating effect of polyferric silicate sulfate had an advantage over polyferric sulfate （PFS）, as the optimum coagulation effect could be obtained when the Si/Fe mole ratio was 0.75 in accordance with its macrostructure of PFSS. According to the Fe-Ferron timed complex-colorimetric method, the Si species was mainly Sic, whereas, the Fe species were Fea and Fec in the copolymerization system. The infrared spectra indicated that the structure of these new flocculants was formed by polymers, mainly by olation, which was different from polyferric sulfate, and the vibration of M-OH-M of around 1100 cm^-1, also proved that there existed Fe-OH-Fe and its polymers in some forms.
基金TheNationalNaturalScienceFoundationofChina (No .2 96 770 0 4)
文摘The effects of the calorimetric buffer solutions were investigated while the two colorimetric reactions of AI-ferron complex and Fe-ferron complex occurred individually, and the effects of the testing wavelength and the pH of the solutions were also investigated. A timed complexatian colorimetric analysis method of Al-Fe-ferron in view of the total concentration of {AI + Fe} was then established to determine the species distribution of polymeric Al-Fe. The testing wavelength was recommended at 362 net and the testing pH value was 5. With a comparison of the ratios of n(Al)/n(Fe), the standard adsorption curves of the polymeric Al-Fe solutions were derived from the experimental results. Furthermore, the solutions' composition were carious in both the molar n(Al)/n(Fe) ratios, i.e. 0/0, 5/5, 9/1 and 0/10, and the concentrations associated with the total ( Al + Fe which ranged from 10(-5) to 10(-4) mol/L..
基金This project is supported by Key Science-Technology Project of Shanghai City Tenth Five-Year-Plan, China (No.031111002)Specialized Research Fund for the Doctoral Program of Higher Education, China (No.20040247033)Municipal Key Basic Research Program of Shanghai, China (No.05JC14060)
文摘In response to the production capacity and functionality variations, a genetic algorithm （GA） embedded with deterministic timed Petri nets（DTPN） for reconfigurable production line（RPL） is proposed to solve its scheduling problem. The basic DTPN modules are presented to model the corresponding variable structures in RPL, and then the scheduling model of the whole RPL is constructed. And in the scheduling algorithm, firing sequences of the Petri nets model are used as chromosomes, thus the selection, crossover, and mutation operator do not deal with the elements in the problem space, but the elements of Petri nets model. Accordingly, all the algorithms for GA operations embedded with Petri nets model are proposed. Moreover, the new weighted single-objective optimization based on reconfiguration cost and E/T is used. The results of a DC motor RPL scheduling suggest that the presented DTPN-GA scheduling algorithm has a significant impact on RPL scheduling, and provide obvious improvements over the conventional scheduling method in practice that meets duedate, minimizes reconfiguration cost, and enhances cost effectivity.
基金This work was supported by the European Community 7th Framework Program （FP7/2007-2013） under Grant agreement No. 248864 （MADES） and the National Natural Science Foundation of China under Grant No. 61202002.
文摘UML is a widely-used, general purpose modeling language. But its lack of a rigorous semantics forbids the thorough analysis of designed solution, and thus precludes the discovery of significant problems at design time. To bridge the gap, the paper investigates the underlying semantics of UML state machine diagrams, along with the time-related modeling elements of MARTE, the profile for modeling and analysis of real-time embedded systems, and proposes a formal operational semantics based on extended hierarchical timed automata. The approach is exemplified on a simple example taken from the automotive domain. Verification is accomplished by translating designed models into the input language of the UPPAAL model checker.
基金the National High Technology Development "863" Program of China (2006AA01Z436, 2007AA01Z452)the National Natural Science Foundation of China(60702042).
文摘Mobile ad hoc networking （MANET） has become an exciting and important technology in recent years, because of the rapid proliferation of wireless devices. Mobile ad hoc networks is highly vulnerable to attacks due to the open medium, dynamically changing network topology, cooperative algorithms, and lack of centralized monitoring and management point. The traditional way of protecting networks with firewalls and encryption software is no longer sufficient and effective for those features. A distributed intrusion detection approach based on timed automata is given. A cluster-based detection scheme is presented, where periodically a node is elected as the monitor node for a cluster. These monitor nodes can not only make local intrusion detection decisions, but also cooperatively take part in global intrusion detection. And then the timed automata is constructed by the way of manually abstracting the correct behaviours of the node according to the routing protocol of dynamic source routing （DSR）. The monitor nodes can verify the behaviour of every nodes by timed automata, and validly detect real-time attacks without signatures of intrusion or trained data. Compared with the architecture where each node is its own IDS agent, the approach is much more efficient while maintaining the same level of effectiveness. Finally, the intrusion detection method is evaluated through simulation experiments.
基金the National Basic Research Program of China (973 Program) (Grant No. 2003CB314801)the National Natural Science Foundation of China (Grant No. 60572082)
文摘Interoperability testing is an important technique to ensure the quality of implementations of network communication protocol. In the next generation Internet protocol, real-time applications should be supported effectively. However, time constraints were not considered in the related studies of protocol interoperability testing, so existing interoperability testing methods are difficult to be applied in real-time protocol interoperability testing. In this paper, a formal method to real-time protocol interoperability testing is proposed. Firstly, a formal model CMpTIOA （communicating multi-port timed input output automata） is defined to specify the system under test （SUT） in real-time protocol interoperability testing; based on this model, timed interoperability relation is then defined. In order to check this relation, a test generation method is presented to generate a parameterized test behavior tree from SUT model; a mechanism of executability pre-determination is also integrated in the test generation method to alleviate state space explosion problem to some extent. The proposed theory and method are then applied in interoperability testing of IPv6 neighbor discovery protocol to show the feasibility of this method.
基金Supported by Chongqing Science and Technology Bureau,No.cstc2019jxjl130023.
文摘BACKGROUND Dysfunction in stroke patients has been a problem that we committed to solve and explore.Physical therapy has some effect to regain strength,balance,and coordination.However,it is not a complete cure,so we are trying to find more effective treatments.AIM To observe the effect of whole-body vibration training(WVT)on the recovery of balance and walking function in stroke patients,which could provide us some useful evidence for planning rehabilitation.METHODS The clinical data of 130 stroke participants who underwent conventional rehabilitation treatment in our hospital from January 2019 to August 2020 were retrospectively analyzed.The participants were divided into whole-body vibration training(WVT)group and non-WVT(NWVT)group according to whether they were given WVT.In the WVT group,routine rehabilitation therapy was combined with WVT by the Galileo Med L Plus vibration trainer at a frequency of 20 Hz and a vibration amplitude of 0+ACY-plusmn+ADs-5.2 mm,and in the NWVT group,routine rehabilitation therapy only was provided.The treatment course of the two groups was 4 wk.Before and after treatment,the Berg balance scale(BBS),3 m timed up-and-go test(TUGT),the maximum walking speed test(MWS),and upper limb functional reaching(FR)test were performed.RESULTS After 4 wk training,in both groups,the BBS score and the FR distance respectively increased to a certain amount(WVT=46.08±3.41 vs NWVT=40.22±3.75;WVT=20.48±2.23 vs NWVT=16.60±2.82),with P<0.05.Furthermore,in the WVT group,both BBS score and FR distance(BBS:18.32±2.18;FR:10.00±0.92)increased more than that in the NWVT group(BBS:13.29±1.66;FR:6.16±0.95),with P<0.05.Meanwhile,in both groups,the TUGT and the MWS were improved after training(WVT=32.64±3.81 vs NWVT=39.56±3.68;WVT=12.73±2.26 vs NWVT=15.04±2.27,respectively),with P<0.05.The change in the WVT group(TUGT:17.49±1.88;MWS:6.79±0.81)was greater than that in the NWVT group(TUGT:10.76±1.42;MWS:4.84±0.58),with P<0.05.CONCLUSION The WVT could effectively improve the balance and walking fu
文摘A series of poly-aluminum-chloride-sulfate (PACS), which has different basicities (gamma) and Al3+/SO42- molar ratio, has been prepared and dried at 105degreesC and 65degreesC, respectively. The distribution of aluminum species of PACS was examined, and the effect of 7 value, Al3+/SO42- molar ratio, dilution on the distribution of aluminum species of PACS was also investigated by using Al-ferron timed complex colorimetric method. The IR spectroscopy and X-ray diffraction were used to study the effect of gamma value, Al3+ / SO42- molar ratio and the drying temperature on the structure of PACS. The experimental results show that Al3+/SO42- molar ratio has a great effect on the distribution of aluminum species, but the dilution has a little effect on the distribution of aluminum species. The lower the Al3+/SO42- molar ratio, the higher the proportions of the polymer and colloidal species in PACS, The polymeric degree of PACS was related to gamma value and Al3+/SO(4)(2-)molar ratio. Drying temperature has an influence on the structure and the solubility of solid PACS products.
文摘In many service delivery systems,the quantity of available resources is often a decisive factor of service quality.Resources can be personnel,offices,devices,supplies,and so on,depending on the nature of the services a system provides.Although service computing has been an active research topic for decades,general approaches that assess the impact of resource provisioning on service quality matrices in a rigorous way remain to be seen.Petri nets have been a popular formalism for modeling systems exhibiting behaviors of competition and concurrency for almost a half century.Stochastic timed Petri nets(STPN),an extension to regular Petri nets,are a powerful tool for system performance evaluation.However,we did not find any single existing STPN software tool that supports all timed transition firing policies and server types,not to mention resource provisioning and requirement analysis.This paper presents a generic and resource oriented STPN simulation engine that provides all critical features necessary for the analysis of service delivery system quality vs.resource provisioning.The power of the simulation system is illustrated by an application to emergency health care systems.
文摘Lorenz-RR scatter plot has an obvious shortcoming in that it does not indicate the time when the scatter point happens.On the Lorenz RR scatter plot,one cannot know the time during which the cardiac rhythms take place.Since occurrence of cardiac rhythms is time-related,time should be introduced to such plots.In this study,time was used as abscissa and RR interval(the time interval between the previous RR wave and the R wave)as the ordinate and time was compressed into a visually observable length,and thereby a timed RR-interval scatter plot,or t-RR scatter plot,for short,was developed.On t-RR scatter plot,the patterns were band-shaped or were of linear type.On the t-RR plot,the sinus rhythm presented bands of various widths,with the spiculate or burred upper and lower boundaries,having diurnal variation.Premature beats showed separate layers(“stratification”),the layer number corresponding the number of RR-intervals.With simple premature beats,the layers were clearly separated.With parasystole rhythm,the upper and lower bands or layers might become thicker.With arial premature beats,the space or distance between layers varied.Ventricular premature beats presented equal space or distance between layers.With tachycardia,the lower layer became a“solid”layer.With atrial fibration,the“stratification”disappeared,presenting thicker or widened layers or bands,with neat lower boundary.With atrial flutter,the layers went parallel,with the layers being evenly separated or some distances being exact multiples of others.The second degree atrioventricular block displayed two layers,the lower and upper bands being equally away from the X-axis,presenting a straight line(pacing at a fixed rate)or a thicker or wider bands,with a neat upper boundary(the lowest pacing rate).When the scatter plot presented uncharacteristic patterns or had some scattered points,which rendered diagnosis difficult,a reverse technology could be used.Briefly,upon selection of scattered points,they were subjected to computerization,by regressio
基金supported by the National Natural Science Foundation of China(11832012)
文摘A state/event fault tree(SEFT)is a modeling technique for describing the causal chains of events leading to failure in software-controlled complex systems.Such systems are ubiquitous in all areas of everyday life,and safety and reliability analyses are increasingly required for these systems.SEFTs combine elements from the traditional fault tree with elements from state-based techniques.In the context of the real-time safety-critical systems,SEFTs do not describe the time properties and important timedependent system behaviors that can lead to system failures.Further,SEFTs lack the precise semantics required for formally modeling time behaviors.In this paper,we present a qualitative analysis method for SEFTs based on transformation from SEFT to timed automata(TA),and use the model checker UPPAAL to verify system requirements’properties.The combination of SEFT and TA is an important step towards an integrated design and verification process for real-time safety-critical systems.Finally,we present a case study of a powerboat autopilot system to confirm our method is viable and valid after achieving the verification goal step by step.
文摘Al Ferron timed complex colorimetric method (AFM) and 27 Al NMR spectroscopy method(ANM) were discussed. For the former, the different colorimetric reagent preparation methods' results indicate that there are some differences beteween them, and the combined method can be used as a simplified procedure. For the latter, the small tube method is more accurate. Eventually, the Al 13 (ANM) was compared to the Al b (AFM).
