A high performance 10-bit 100-MS/s two-channel time-interleaved pipelined ADC is designed for intermediate frequency 3G receivers,and OTA is shared among the channels for low power dissipation.Offset mismatch, gain mi...A high performance 10-bit 100-MS/s two-channel time-interleaved pipelined ADC is designed for intermediate frequency 3G receivers,and OTA is shared among the channels for low power dissipation.Offset mismatch, gain mismatch and time skew mismatch are overcome by OTA sharing,increasing the accuracy of each channel and global passive sampling respectively.The linearity deterioration caused by the charge injection of the output switch and the crosstalk of the off-switch capacitor is removed by modifying the clock signal arrangement.The total power consumption of the presented ADC is 70 mW from a 3.3-V power supply.Fabricated in a 180-nm CMOS process,the core of the prototype occupies an area of 2.5×1.5 mm;,achieving more than 70-dB spurious-free dynamic range and over 56-dB signal-to-noise distortion ratio over the Nyquist input band at 100-MHz sampling frequency.展开更多
介绍了一款应用于无线收发系统的12 bit 200 MS/s的A/D转换器(ADC)。流水线型模数转换器是从中频采样到高频采样并且具有高精度的典型结构,多个流水线型模数转换器利用时间交织技术合并成一个模数转换器的构想则是复杂结构和能量利用率...介绍了一款应用于无线收发系统的12 bit 200 MS/s的A/D转换器(ADC)。流水线型模数转换器是从中频采样到高频采样并且具有高精度的典型结构,多个流水线型模数转换器利用时间交织技术合并成一个模数转换器的构想则是复杂结构和能量利用率之间的折中选择。采用了时间交织、流水线和运算放大器共享等技术,既提高了速度和精度,也节省了功耗。同时为了减小时序失配对时间交织流水线ADC性能的影响,提出了一种对时序扭曲不敏感的采样保持电路。采用SMIC0.13μm CMOS工艺进行了电路设计,核心电路面积为1.6 mm×1.3 mm。测试结果表明,在采样速率为200 MS/s、模拟输入信号频率为1 MHz时,无杂散动态范围(SFDR)可以达到67.8 d B,信噪失真比(SNDR)为55.7 d B,ADC的品质因子(Fo M)为1.07 p J/conv.,而功耗为107 m W。展开更多
A novel Time-Interleaved Analog-to-Digital Converter (TIADC) digital background calibration for the mismatches of offsets, gain errors, and timing skews based on split-ADC is proposed. Firstly, the split-ADC channels ...A novel Time-Interleaved Analog-to-Digital Converter (TIADC) digital background calibration for the mismatches of offsets, gain errors, and timing skews based on split-ADC is proposed. Firstly, the split-ADC channels in present TIADC architecture are designed to convert input signal at two different channel sampling rates so that redundant channel to facilitate pair permutation is avoided. Secondly, a high-order compensation scheme for correction of timing skew error is employed for effective calibration to preserve high-resolution when input frequency is high. Numerical simulation performed by MATLAB for a 14-bit TIADC based on 7 split-ADC channels shows that Signal-to-Noise and Distortion Ratio (SNDR) and Spurious Free Dynamic Range (SFDR) of the TIADC achieve 86.2 dBc and 106 dBc respectively after calibration with normalized input frequency near Nyquist frequency.展开更多
Time interleaved analog-to-digital conversion （TIADC） based on parallelism is an effective way to meet the requirement of the ultra-fast waveform digitizer beyond Gsps. Different methods to correct the mismatch erro...Time interleaved analog-to-digital conversion （TIADC） based on parallelism is an effective way to meet the requirement of the ultra-fast waveform digitizer beyond Gsps. Different methods to correct the mismatch errors among different analog-to-digital conversion channels have been developed previously. To overcome the speed limi- tation in hardware design and to implement the mismatch correction algorithm in real time, this paper proposes a fully parallel correction algorithm. A 12-bit l-Gsps waveform digitizer with ENOB around 10.5 bit from 5 MHz to 200 MHz is implemented based on the real-time correction algorithm.展开更多
为了解决海量数据的高速传输问题,本文以AXIe(Advanced TCA Extensions for Instrumentation)总线为传输架构,重点设计数据的高速缓存和传输接口,并设计时间交织数据采集模块完成AXIe数据采集传输接口验证.通过两片ADC实现时间交织数据...为了解决海量数据的高速传输问题,本文以AXIe(Advanced TCA Extensions for Instrumentation)总线为传输架构,重点设计数据的高速缓存和传输接口,并设计时间交织数据采集模块完成AXIe数据采集传输接口验证.通过两片ADC实现时间交织数据采样功能,将DDR3作为数据的深存储单元,采用PCI Express实现数据高速传输.在FPGA上完成设计,使用ILA嵌入式逻辑分析仪进行功能验证.结果表明,该设计能很好地实现交织采样功能,完成基于AXIe总线的数据传输.展开更多
High spectral efficiency is essential in design of multimedia communication systems such as L-band mobile in addition to various requirements of transmission quality. Time-interleaved A/D converter （TI-ADC） is an ef...High spectral efficiency is essential in design of multimedia communication systems such as L-band mobile in addition to various requirements of transmission quality. Time-interleaved A/D converter （TI-ADC） is an effective candidate to implement wide-band ADC with relatively slow circuits accounting for digital spectrum management. However, practical performance of TI-ADC is largely limited because of mismatches between different channels originated from manufacturing process variations. In this paper, a blind adaptive method is proposed to correct gain mismatch errors in TI-ADC, and it is verified through simulations on a two-channel TI-ADC. In proposed method, gain mismatch error is estimated and corrected in an adaptive scheme. Proposed compensated T1-ADC architecture is structurally very simple and hence suitable for realiza- tion in integrated circuits. Besides, proposed digital compensation algorithm not only is computationally efficient but also provides an improvement of 32.7 dB in the performance of two-channel TI ADC.展开更多
基金supported by the National Natural Science Foundation of China(No.90707002)
文摘A high performance 10-bit 100-MS/s two-channel time-interleaved pipelined ADC is designed for intermediate frequency 3G receivers,and OTA is shared among the channels for low power dissipation.Offset mismatch, gain mismatch and time skew mismatch are overcome by OTA sharing,increasing the accuracy of each channel and global passive sampling respectively.The linearity deterioration caused by the charge injection of the output switch and the crosstalk of the off-switch capacitor is removed by modifying the clock signal arrangement.The total power consumption of the presented ADC is 70 mW from a 3.3-V power supply.Fabricated in a 180-nm CMOS process,the core of the prototype occupies an area of 2.5×1.5 mm;,achieving more than 70-dB spurious-free dynamic range and over 56-dB signal-to-noise distortion ratio over the Nyquist input band at 100-MHz sampling frequency.
文摘介绍了一款应用于无线收发系统的12 bit 200 MS/s的A/D转换器(ADC)。流水线型模数转换器是从中频采样到高频采样并且具有高精度的典型结构,多个流水线型模数转换器利用时间交织技术合并成一个模数转换器的构想则是复杂结构和能量利用率之间的折中选择。采用了时间交织、流水线和运算放大器共享等技术,既提高了速度和精度,也节省了功耗。同时为了减小时序失配对时间交织流水线ADC性能的影响,提出了一种对时序扭曲不敏感的采样保持电路。采用SMIC0.13μm CMOS工艺进行了电路设计,核心电路面积为1.6 mm×1.3 mm。测试结果表明,在采样速率为200 MS/s、模拟输入信号频率为1 MHz时,无杂散动态范围(SFDR)可以达到67.8 d B,信噪失真比(SNDR)为55.7 d B,ADC的品质因子(Fo M)为1.07 p J/conv.,而功耗为107 m W。
基金Supported by the National Natural Science Foundation of China (No. 61076026)
文摘A novel Time-Interleaved Analog-to-Digital Converter (TIADC) digital background calibration for the mismatches of offsets, gain errors, and timing skews based on split-ADC is proposed. Firstly, the split-ADC channels in present TIADC architecture are designed to convert input signal at two different channel sampling rates so that redundant channel to facilitate pair permutation is avoided. Secondly, a high-order compensation scheme for correction of timing skew error is employed for effective calibration to preserve high-resolution when input frequency is high. Numerical simulation performed by MATLAB for a 14-bit TIADC based on 7 split-ADC channels shows that Signal-to-Noise and Distortion Ratio (SNDR) and Spurious Free Dynamic Range (SFDR) of the TIADC achieve 86.2 dBc and 106 dBc respectively after calibration with normalized input frequency near Nyquist frequency.
基金Supported by Knowledge Innovation Program of Chinese Academy of Sciences(KJCX2-YW-N27)National Natural Science Foundation of China(11175176,10476028)
文摘Time interleaved analog-to-digital conversion （TIADC） based on parallelism is an effective way to meet the requirement of the ultra-fast waveform digitizer beyond Gsps. Different methods to correct the mismatch errors among different analog-to-digital conversion channels have been developed previously. To overcome the speed limi- tation in hardware design and to implement the mismatch correction algorithm in real time, this paper proposes a fully parallel correction algorithm. A 12-bit l-Gsps waveform digitizer with ENOB around 10.5 bit from 5 MHz to 200 MHz is implemented based on the real-time correction algorithm.
基金Iran’s Telecommunication Research Center(ITRC)(No.500/3653)
文摘High spectral efficiency is essential in design of multimedia communication systems such as L-band mobile in addition to various requirements of transmission quality. Time-interleaved A/D converter （TI-ADC） is an effective candidate to implement wide-band ADC with relatively slow circuits accounting for digital spectrum management. However, practical performance of TI-ADC is largely limited because of mismatches between different channels originated from manufacturing process variations. In this paper, a blind adaptive method is proposed to correct gain mismatch errors in TI-ADC, and it is verified through simulations on a two-channel TI-ADC. In proposed method, gain mismatch error is estimated and corrected in an adaptive scheme. Proposed compensated T1-ADC architecture is structurally very simple and hence suitable for realiza- tion in integrated circuits. Besides, proposed digital compensation algorithm not only is computationally efficient but also provides an improvement of 32.7 dB in the performance of two-channel TI ADC.
