Porous silicon carbide(SiC)has a specific biomorphous microstructure similar to the trabecular microstructure of human bone.Compared with that of bioactive ceramics,such as calcium phosphate,SiC does not induce sponta...Porous silicon carbide(SiC)has a specific biomorphous microstructure similar to the trabecular microstructure of human bone.Compared with that of bioactive ceramics,such as calcium phosphate,SiC does not induce spontaneous interface bonding to living bone.In this study,bioactive tantalum(Ta)metal deposited on porous SiC scaffolds by chemical vapour deposition was investigated to accelerate osseointegration and improve the bonding to bones.Scanning electron microscopy indicated that the Ta coating evenly covered the entire scaffold structure.Energy-dispersive spectroscopy and X-ray diffraction analysis showed that the coating consisted of Ta phases.The bonding strength between the Ta coating and the SiC substrate is 88.4MPa.The yield strength of porous SiC with a Ta coating(pTa)was 45.862.9MPa,the compressive strength was 61.463.2MPa and the elasticmodulus was4.8GPa.When MG-63 human osteoblasts were co-cultured with pTa,osteoblasts showed good adhesion and spreading on the surface of the pTa and its porous structure,which showed that it has excellent bioactivity and cyto-compatibility.To further study the osseointegration properties of pTa.PTa and porous titanium(pTi)were implanted into the femoral neck of goats for 12weeks,respectively.The Van-Gieson staining of histological sections results that the pTa group had better osseointegration than the pTi group.These results indicate that coating bioactive Ta metal on porous SiC scaffolds could be a potential material for bone substitutes.展开更多
Poly(ether imide)(PEI)has shown satisfactory corrosion protection capability with good adhesion strength as a coating for magnesium(Mg),a potential candidate of biodegradable orthopedic implant material.However,its in...Poly(ether imide)(PEI)has shown satisfactory corrosion protection capability with good adhesion strength as a coating for magnesium(Mg),a potential candidate of biodegradable orthopedic implant material.However,its innate hydrophobic property causes insufficient osteoblast affinity and a lack of osseointegration.Herein,we modify the physical and chemical properties of a PEI-coated Mg implant.A plasma immersion ion implantation technique is combined with direct current(DC)magnetron sputtering to introduce biologically compatible tantalum(Ta)onto the surface of the PEI coating.The PEI-coating layer is not damaged during this process owing to the extremely short processing time(30 s),retaining its high corrosion protection property and adhesion stability.The Ta-implanted layer(roughly 10-nm-thick)on the topmost PEI surface generates long-term surface hydrophilicity and favorable surface conditions for pre-osteoblasts to adhere,proliferate,and differentiate.Furthermore,in a rabbit femur study,the Ta/PEI-coated Mg implant demonstrates significantly enhanced bone tissue affinity and osseointegration capability.These results indicate that Ta/PEI-coated Mg is promising for achieving early mechanical fixation and long-term success in biodegradable orthopedic implant applications.展开更多
A new method for preparation of TaC coating on C/C composite material is reported. The amorphous ethylate tantalum jellied as the precursor is prepared and spread densely on the surface of the C/C composite material s...A new method for preparation of TaC coating on C/C composite material is reported. The amorphous ethylate tantalum jellied as the precursor is prepared and spread densely on the surface of the C/C composite material so as to form a multilayer film. In a graphitization furnace the multilayer film is transformed into TaC coating at various temperatures. Ethylate tantalum film is characterized by FT-IR (Fourier transform infrared) spectra, XRD (X-ray diffraction) and SEM (scanning electron microscopy) and TaC coating is characterized by XRD and SEM. At 1200℃ the coating contained TaC and Ta2O5, and at above 1400℃ only TaC is formed. The coating formed at 1600℃ is a continuous stratum structure, and that formed at 1600℃ is a porous net structure. Analysis on thermodynamics and formation mechanism of TaC indicates that, after ethylate tantalum is decomposed, Ta2O5 is first produced and then transformed into Ta2C, and newly formed Ta2C is transformed into TaC by the sufficient C at last.展开更多
基金supported by the National major research and invention programme of the thirteenth of China(no.2016YFC1102000)the Dalian Science and Technology Innovation Fund Project(no.2018J11CY030).
文摘Porous silicon carbide(SiC)has a specific biomorphous microstructure similar to the trabecular microstructure of human bone.Compared with that of bioactive ceramics,such as calcium phosphate,SiC does not induce spontaneous interface bonding to living bone.In this study,bioactive tantalum(Ta)metal deposited on porous SiC scaffolds by chemical vapour deposition was investigated to accelerate osseointegration and improve the bonding to bones.Scanning electron microscopy indicated that the Ta coating evenly covered the entire scaffold structure.Energy-dispersive spectroscopy and X-ray diffraction analysis showed that the coating consisted of Ta phases.The bonding strength between the Ta coating and the SiC substrate is 88.4MPa.The yield strength of porous SiC with a Ta coating(pTa)was 45.862.9MPa,the compressive strength was 61.463.2MPa and the elasticmodulus was4.8GPa.When MG-63 human osteoblasts were co-cultured with pTa,osteoblasts showed good adhesion and spreading on the surface of the pTa and its porous structure,which showed that it has excellent bioactivity and cyto-compatibility.To further study the osseointegration properties of pTa.PTa and porous titanium(pTi)were implanted into the femoral neck of goats for 12weeks,respectively.The Van-Gieson staining of histological sections results that the pTa group had better osseointegration than the pTi group.These results indicate that coating bioactive Ta metal on porous SiC scaffolds could be a potential material for bone substitutes.
基金a grant of the Korea Health Technology R&D Project through the Korea Health Industry Development Institute(KHIDI)the Ministry of Health&Welfare,Republic of Korea(grant number:HI18C0493).
文摘Poly(ether imide)(PEI)has shown satisfactory corrosion protection capability with good adhesion strength as a coating for magnesium(Mg),a potential candidate of biodegradable orthopedic implant material.However,its innate hydrophobic property causes insufficient osteoblast affinity and a lack of osseointegration.Herein,we modify the physical and chemical properties of a PEI-coated Mg implant.A plasma immersion ion implantation technique is combined with direct current(DC)magnetron sputtering to introduce biologically compatible tantalum(Ta)onto the surface of the PEI coating.The PEI-coating layer is not damaged during this process owing to the extremely short processing time(30 s),retaining its high corrosion protection property and adhesion stability.The Ta-implanted layer(roughly 10-nm-thick)on the topmost PEI surface generates long-term surface hydrophilicity and favorable surface conditions for pre-osteoblasts to adhere,proliferate,and differentiate.Furthermore,in a rabbit femur study,the Ta/PEI-coated Mg implant demonstrates significantly enhanced bone tissue affinity and osseointegration capability.These results indicate that Ta/PEI-coated Mg is promising for achieving early mechanical fixation and long-term success in biodegradable orthopedic implant applications.
文摘A new method for preparation of TaC coating on C/C composite material is reported. The amorphous ethylate tantalum jellied as the precursor is prepared and spread densely on the surface of the C/C composite material so as to form a multilayer film. In a graphitization furnace the multilayer film is transformed into TaC coating at various temperatures. Ethylate tantalum film is characterized by FT-IR (Fourier transform infrared) spectra, XRD (X-ray diffraction) and SEM (scanning electron microscopy) and TaC coating is characterized by XRD and SEM. At 1200℃ the coating contained TaC and Ta2O5, and at above 1400℃ only TaC is formed. The coating formed at 1600℃ is a continuous stratum structure, and that formed at 1600℃ is a porous net structure. Analysis on thermodynamics and formation mechanism of TaC indicates that, after ethylate tantalum is decomposed, Ta2O5 is first produced and then transformed into Ta2C, and newly formed Ta2C is transformed into TaC by the sufficient C at last.
