A three-dimensional numerical model was established to simulate the hydrodynamics within an octagonal tank of a recirculating aquaculture system. The realizable k-e turbulence model was applied to describe the flow, t...A three-dimensional numerical model was established to simulate the hydrodynamics within an octagonal tank of a recirculating aquaculture system. The realizable k-e turbulence model was applied to describe the flow, the discrete phase model （DPM） was applied to generate particle trajectories, and the governing equations are solved using the finite volume method. To validate this model, the numerical results were compared with data obtained from a full-scale physical model. The results show that： （1） the realizable k-e model applied for turbulence modeling describes well the flow pattern in octagonal tanks, giving an average relative error of velocities between simulated and measured values of 18% from contour maps of velocity magnitudes; （2） the DPM was applied to obtain particle trajectories and to simulate the rate of particle removal from the tank. The average relative error of the removal rates between simulated and measured values was 11%. The DPM can be used to assess the self-cleaning capability of an octagonal tank; （3） a comprehensive account of the hydrodynamics within an octagonal tank can be assessed from simulations. The velocity distribution was uniform with an average velocity of 15 cm/s; the velocity reached 0.8 m/s near the inlet pipe, which can result in energy losses and cause wall abrasion; the velocity in tank corners was more than 15 cm/s, which suggests good water mixing, and there was no particle sedimentation. The percentage of particle removal for octagonal tanks was 90% with the exception of a little accumulation of 〈5 mm particle in the area between the inlet pipe and the wall. This study demonstrated a consistent numerical model of the hydrodynamics within octagonal tanks that can be further used in their design and optimization as well as promote the wide use of computational fluid dynamics in aquaculture engineering.展开更多
The hydrodynamics of suspension of solids in liquids are critical to the design and performance of stirred tanks as mixing systems. Modelling a multiphase stirred tank at a high solids concentration is complex owing t...The hydrodynamics of suspension of solids in liquids are critical to the design and performance of stirred tanks as mixing systems. Modelling a multiphase stirred tank at a high solids concentration is complex owing to particle-particle and particle-wall interactions which are generally neglected at low concentra- tions. Most models do not consider such interactions and deviate significantly from experimental data. Furthermore, drag force, turbulence and turbulent dispersion play a crucial role and need to be precisely known in predicting local hydrodynamics. Therefore, critical factors such as the modelling approach, drag, dispersion, coefficient of restitution and turbulence are examined and discussed exhaustively in this paper. The Euler-Euler approach with kinetic theory of granular flow, Syamlal-O＇Brien drag model and Reynolds stress turbulence model provide realistic predictions for such systems. The contribution of the turbulent dispersion force in improving the prediction is marginal but cannot be neglected at low solids volume fractions. Inferences drawn from the study and the finalised models will be instrumen- tal in accurately simulating the solids suspension in stirred tanks for a wide range of conditions. These models can be used in simulations to obtain precise results needed for an in-depth understanding of hydrodynamics in stirred tanks.展开更多
Fuel tank inerting technologies are able to reduce the fire risk by injection of inert gas into the ullage or fuel, the former called ullage washing and the latter fuel scrubbing. The Green On-Board Inert Gas Generati...Fuel tank inerting technologies are able to reduce the fire risk by injection of inert gas into the ullage or fuel, the former called ullage washing and the latter fuel scrubbing. The Green On-Board Inert Gas Generation System（GOBIGGS） is a novel technology based on flameless catalytic combustion, and owning to its simple structure and high inerting efficiency, it has received a lot of attentions. The inert gas in the GOBIGGS is mainly comprised of CO2, N2, and O2（hereinafter, Mixed Inert Gas（MIG））, while that in the On-Board Inert Gas Generation System（OBIGGS）, which is one of the most widely used fuel tank inerting technologies, is NitrogenEnriched Air（NEA）. The solubility of CO2 is nearly 20 times higher than that of N2 in jet fuels,so the inerting capability and performance are definitely disparate if the inert gas is selected as NEA or MIG. An inerting test bench was constructed to compare the inerting capabilities between NEA and MIG. Experimental results reveal that, if ullage washing is adopted, the variations of oxygen concentrations on the ullage and in the fuel are nearly identical no matter the inert gas is NEA or MIG. However, the ullage and dissolved oxygen concentrations of MIG scrubbing are always higher than those of NEA scrubbing.展开更多
The estimation of sloshing loading on liquid tanks is of fundamental importance due to the wide and important applications of liquid tanks in various engineering aspects. Analytical solutions for the sloshing loading ...The estimation of sloshing loading on liquid tanks is of fundamental importance due to the wide and important applications of liquid tanks in various engineering aspects. Analytical solutions for the sloshing loading on circular cylindrical liquid tanks with an interior concentric vertical thin semi-porous barrier under external excitations are presented. And the extensions of the solutions to the elastic vibrations and to the high frequency limit to count for the earthquake response are also included. A clear view on the influence of semi-porous barriers to the sloshing response of oscillating tanks is obtained by the analyses of systematic computational results. The present results may offer guidance to the corresponding design for liquid tanks of various applications and also a basis of comparison for the development of more sophisticated numerical methods for hydrodynamic and hydro-elastic analyses.展开更多
基金Supported by the Application Research Project of Post-Doctoral Researchers in Qingdao(No.ZQ51201415037)the Modern Agriculture Industry System Construction of Special Funds(No.CARS-50-G10)+1 种基金the Special Project about Independent Innovation and Achievement Transformation of Shandong Province(No.2014ZZCX07102)the Key R&D Program of Jiangsu Province(No.BE2015328)
文摘A three-dimensional numerical model was established to simulate the hydrodynamics within an octagonal tank of a recirculating aquaculture system. The realizable k-e turbulence model was applied to describe the flow, the discrete phase model （DPM） was applied to generate particle trajectories, and the governing equations are solved using the finite volume method. To validate this model, the numerical results were compared with data obtained from a full-scale physical model. The results show that： （1） the realizable k-e model applied for turbulence modeling describes well the flow pattern in octagonal tanks, giving an average relative error of velocities between simulated and measured values of 18% from contour maps of velocity magnitudes; （2） the DPM was applied to obtain particle trajectories and to simulate the rate of particle removal from the tank. The average relative error of the removal rates between simulated and measured values was 11%. The DPM can be used to assess the self-cleaning capability of an octagonal tank; （3） a comprehensive account of the hydrodynamics within an octagonal tank can be assessed from simulations. The velocity distribution was uniform with an average velocity of 15 cm/s; the velocity reached 0.8 m/s near the inlet pipe, which can result in energy losses and cause wall abrasion; the velocity in tank corners was more than 15 cm/s, which suggests good water mixing, and there was no particle sedimentation. The percentage of particle removal for octagonal tanks was 90% with the exception of a little accumulation of 〈5 mm particle in the area between the inlet pipe and the wall. This study demonstrated a consistent numerical model of the hydrodynamics within octagonal tanks that can be further used in their design and optimization as well as promote the wide use of computational fluid dynamics in aquaculture engineering.
文摘The hydrodynamics of suspension of solids in liquids are critical to the design and performance of stirred tanks as mixing systems. Modelling a multiphase stirred tank at a high solids concentration is complex owing to particle-particle and particle-wall interactions which are generally neglected at low concentra- tions. Most models do not consider such interactions and deviate significantly from experimental data. Furthermore, drag force, turbulence and turbulent dispersion play a crucial role and need to be precisely known in predicting local hydrodynamics. Therefore, critical factors such as the modelling approach, drag, dispersion, coefficient of restitution and turbulence are examined and discussed exhaustively in this paper. The Euler-Euler approach with kinetic theory of granular flow, Syamlal-O＇Brien drag model and Reynolds stress turbulence model provide realistic predictions for such systems. The contribution of the turbulent dispersion force in improving the prediction is marginal but cannot be neglected at low solids volume fractions. Inferences drawn from the study and the finalised models will be instrumen- tal in accurately simulating the solids suspension in stirred tanks for a wide range of conditions. These models can be used in simulations to obtain precise results needed for an in-depth understanding of hydrodynamics in stirred tanks.
基金supported by Funding of Jiangsu Innovation Program for Graduate Education of China (No.KYLX15_0231)Postgraduate Research & Practice Innovation Program of Jiangsu Province of China (No.KYCX17_0279)+1 种基金the Fundamental Research Funds for the Central Universities,Aviation Industry Corporation of China Technology Innovation Fund for Fundamental Research (No.2014D60931R)Funding of Ministry of Industry and Information Technology for Civil Aircraft
文摘Fuel tank inerting technologies are able to reduce the fire risk by injection of inert gas into the ullage or fuel, the former called ullage washing and the latter fuel scrubbing. The Green On-Board Inert Gas Generation System（GOBIGGS） is a novel technology based on flameless catalytic combustion, and owning to its simple structure and high inerting efficiency, it has received a lot of attentions. The inert gas in the GOBIGGS is mainly comprised of CO2, N2, and O2（hereinafter, Mixed Inert Gas（MIG））, while that in the On-Board Inert Gas Generation System（OBIGGS）, which is one of the most widely used fuel tank inerting technologies, is NitrogenEnriched Air（NEA）. The solubility of CO2 is nearly 20 times higher than that of N2 in jet fuels,so the inerting capability and performance are definitely disparate if the inert gas is selected as NEA or MIG. An inerting test bench was constructed to compare the inerting capabilities between NEA and MIG. Experimental results reveal that, if ullage washing is adopted, the variations of oxygen concentrations on the ullage and in the fuel are nearly identical no matter the inert gas is NEA or MIG. However, the ullage and dissolved oxygen concentrations of MIG scrubbing are always higher than those of NEA scrubbing.
文摘The estimation of sloshing loading on liquid tanks is of fundamental importance due to the wide and important applications of liquid tanks in various engineering aspects. Analytical solutions for the sloshing loading on circular cylindrical liquid tanks with an interior concentric vertical thin semi-porous barrier under external excitations are presented. And the extensions of the solutions to the elastic vibrations and to the high frequency limit to count for the earthquake response are also included. A clear view on the influence of semi-porous barriers to the sloshing response of oscillating tanks is obtained by the analyses of systematic computational results. The present results may offer guidance to the corresponding design for liquid tanks of various applications and also a basis of comparison for the development of more sophisticated numerical methods for hydrodynamic and hydro-elastic analyses.
