High-energy ball milling has a great influence on the temperature characters of synthetic reaction in Al-TiO2-C system by changing the size,distribution state and wet ability of reactants.Reaction temperature charact...High-energy ball milling has a great influence on the temperature characters of synthetic reaction in Al-TiO2-C system by changing the size,distribution state and wet ability of reactants.Reaction temperature characters（reaction ignition time,ignition temperature time.the maximum temperature and temperature rising rate）were changed by different milling time.The longer the milling time.the earlier the reaction.the quicker the temperature rise and the higher the maximum temperature.When the milling time exceeded 10 hours,the reactivity of reactants was so high that the synthetic reaction could take place at 850℃ directly without a long time pretreatment at 670℃.The microstructure of synthetic composites became uniform and the reinforced particles（TiC and α-Al2O3）became fine with milling time increasing.展开更多
This paper describes the development of a plasma process to produce a durable water repellent and anti-stain thin film on synthetic textile, utilized for the upholstery in the automotive field. The coatings were depos...This paper describes the development of a plasma process to produce a durable water repellent and anti-stain thin film on synthetic textile, utilized for the upholstery in the automotive field. The coatings were deposited in non equilibrium low pressure plasmas fed with 1H, 1H, 2H-perfluo-ro- 1-decene employing, as substrates, polyethylene terephthalate and polyethylene terephthalate thermo-coupled to polyurethane foam. It was found that the XPS F/C ratio of the deposit was higher than 1.4 and that the treated textile was always very hydrophobic (WCA > 140?) and oil resistant (motor oil CA > 110?), even after wear.展开更多
文摘High-energy ball milling has a great influence on the temperature characters of synthetic reaction in Al-TiO2-C system by changing the size,distribution state and wet ability of reactants.Reaction temperature characters（reaction ignition time,ignition temperature time.the maximum temperature and temperature rising rate）were changed by different milling time.The longer the milling time.the earlier the reaction.the quicker the temperature rise and the higher the maximum temperature.When the milling time exceeded 10 hours,the reactivity of reactants was so high that the synthetic reaction could take place at 850℃ directly without a long time pretreatment at 670℃.The microstructure of synthetic composites became uniform and the reinforced particles（TiC and α-Al2O3）became fine with milling time increasing.
文摘This paper describes the development of a plasma process to produce a durable water repellent and anti-stain thin film on synthetic textile, utilized for the upholstery in the automotive field. The coatings were deposited in non equilibrium low pressure plasmas fed with 1H, 1H, 2H-perfluo-ro- 1-decene employing, as substrates, polyethylene terephthalate and polyethylene terephthalate thermo-coupled to polyurethane foam. It was found that the XPS F/C ratio of the deposit was higher than 1.4 and that the treated textile was always very hydrophobic (WCA > 140?) and oil resistant (motor oil CA > 110?), even after wear.
