为了更加有效与便捷地识别SDH(Synchronous digital hierarchy,同步数字体系)中帧的起始位置,保证帧同步的正确性,提出了一种SDH传输系统中帧定位电路的设计方法。通过反复调用模块与指示帧告警信号相结合的方法,防止帧定位产生伪同步...为了更加有效与便捷地识别SDH(Synchronous digital hierarchy,同步数字体系)中帧的起始位置,保证帧同步的正确性,提出了一种SDH传输系统中帧定位电路的设计方法。通过反复调用模块与指示帧告警信号相结合的方法,防止帧定位产生伪同步与真失步现象。并采用Veri l og语言对设计进行了RTL级的描述、仿真和综合,最终以ASIC方式得到实现。该设计方法与传统设计方法相比,更加方便简洁地实现了较复杂的帧定位过程。实验证明该设计能够完成帧定位的过程。展开更多
The development of non-linear loads at consumers has significantly impacted power supply systems.Since,the poor power quality has been found in the three-phase distribution system due to unbalanced loads,harmonic curre...The development of non-linear loads at consumers has significantly impacted power supply systems.Since,the poor power quality has been found in the three-phase distribution system due to unbalanced loads,harmonic current,undesired voltage regulation,and extreme reactive power demand.To overcome this issue,Distributed STATicCOMpensator(DSTATCOM)is implemented.DSTATCOM is a shunt-connected Voltage Source Converter(VSC)that has been utilized in distribution networks to balance the bus voltage in terms of enhancing reactive power control and power factor.DSTATCOM can provide both rapid and continuous capacitive and inductive mode compensation.A rectified resistive and inductive load eliminates current harmonics in a three-phase power supply.The synchronous fundamental DQ frame is a time-domain approach developed from three-phase system space vector transformations has been designed using MATLAB/Simulink.The DQ theory is used to produce the reference signal for the Pulse Width Modulation(PWM)generator.In addition,a traditional Propor-tional Integral Derivative(PID)controller is designed and compared with pro-posed soft computing approaches such as Fuzzy–PID and Artificial Neural Network(ANN-PID)and compared accurate reference current determination for Direct Current(DC)bus through DC link.An Analytical explores the pro-posed control strategies given to establish superior outcomes.Finally,total harmo-nic distortion analysis should be taken for performance analysis of the proposed system with IEEE standards.展开更多
DQ impedance-based method has been widely used to study the stability of three-phase converter systems.As the dq impedance model of each converter depends on its local dq reference frame,the dq impedance modeling of c...DQ impedance-based method has been widely used to study the stability of three-phase converter systems.As the dq impedance model of each converter depends on its local dq reference frame,the dq impedance modeling of complex converter networks gets complicated.Because the reference frames of different converters might not fully align,depending on the structure.Thus,in order to find an accurate impedance model of a complex network for stability analysis,converting the impedances of different converters into a common reference frame is required.This paper presents a comprehensive investigation on the transformation of dq impedances to a common reference frame in complex converter networks.Four different methods are introduced and analyzed in a systematic way.Moreover,a rigorous comparison among these approaches is carried out,where the method with the simplest transformation procedure is finally suggested for the modeling of complex converter networks.The performed analysis is verified by injecting two independent small-signal perturbations into the d and the q axis,and doing a point-by-point impedance measurement.展开更多
Dynamic reactive power compensation equipment typically requires a fast response to output the necessary reactive power.The term"dynamic response time of reactive power"is often used but has never been clear...Dynamic reactive power compensation equipment typically requires a fast response to output the necessary reactive power.The term"dynamic response time of reactive power"is often used but has never been clearly defined.This paper summarizes the reactive power calculations under different definitions and algorithms and considers these calculations in terms of signal processing to simulate and analyze the step response.This paper subsequently focuses on the widely used instantaneous reactive power algorithm and finally concludes that the dynamic reactive power response time closely depends on the reactive power calculation method itself.The single-phase instantaneous reactive power algorithm has the fastest response time.The reactive power response time of dynamic reactive devices in power systems is a minimum of a quarter of one cycle time for the well-known and widely used single-phase reactive power algorithms.展开更多
This paper presents calculations of the varying inductances profile for a synchronous linear surface mounted permanent magnet generator in an ABC reference system. Calculations are performed by utilizing the reluctanc...This paper presents calculations of the varying inductances profile for a synchronous linear surface mounted permanent magnet generator in an ABC reference system. Calculations are performed by utilizing the reluctance term, known from analytic calculations and finite element method simulations. With the inductance term identified, the voltage difference between the generator’s no load and load voltage can be calculated and an external circuit can be designed for optimal use of the generator. Two different operation intervals of the linear generator are considered and the results are discussed. The result indicates that time costly finite element simulations can be replaced with simple analytical calculations for a surface mounted permanent magnet linear generator.展开更多
文摘为了更加有效与便捷地识别SDH(Synchronous digital hierarchy,同步数字体系)中帧的起始位置,保证帧同步的正确性,提出了一种SDH传输系统中帧定位电路的设计方法。通过反复调用模块与指示帧告警信号相结合的方法,防止帧定位产生伪同步与真失步现象。并采用Veri l og语言对设计进行了RTL级的描述、仿真和综合,最终以ASIC方式得到实现。该设计方法与传统设计方法相比,更加方便简洁地实现了较复杂的帧定位过程。实验证明该设计能够完成帧定位的过程。
文摘The development of non-linear loads at consumers has significantly impacted power supply systems.Since,the poor power quality has been found in the three-phase distribution system due to unbalanced loads,harmonic current,undesired voltage regulation,and extreme reactive power demand.To overcome this issue,Distributed STATicCOMpensator(DSTATCOM)is implemented.DSTATCOM is a shunt-connected Voltage Source Converter(VSC)that has been utilized in distribution networks to balance the bus voltage in terms of enhancing reactive power control and power factor.DSTATCOM can provide both rapid and continuous capacitive and inductive mode compensation.A rectified resistive and inductive load eliminates current harmonics in a three-phase power supply.The synchronous fundamental DQ frame is a time-domain approach developed from three-phase system space vector transformations has been designed using MATLAB/Simulink.The DQ theory is used to produce the reference signal for the Pulse Width Modulation(PWM)generator.In addition,a traditional Propor-tional Integral Derivative(PID)controller is designed and compared with pro-posed soft computing approaches such as Fuzzy–PID and Artificial Neural Network(ANN-PID)and compared accurate reference current determination for Direct Current(DC)bus through DC link.An Analytical explores the pro-posed control strategies given to establish superior outcomes.Finally,total harmo-nic distortion analysis should be taken for performance analysis of the proposed system with IEEE standards.
基金The support of the first and fourth authors is given by National Key R&D Program of China,2018YFB0905200.The support for the second and third authors is coming from BIRD171227/17 project of the University of Padova.
文摘DQ impedance-based method has been widely used to study the stability of three-phase converter systems.As the dq impedance model of each converter depends on its local dq reference frame,the dq impedance modeling of complex converter networks gets complicated.Because the reference frames of different converters might not fully align,depending on the structure.Thus,in order to find an accurate impedance model of a complex network for stability analysis,converting the impedances of different converters into a common reference frame is required.This paper presents a comprehensive investigation on the transformation of dq impedances to a common reference frame in complex converter networks.Four different methods are introduced and analyzed in a systematic way.Moreover,a rigorous comparison among these approaches is carried out,where the method with the simplest transformation procedure is finally suggested for the modeling of complex converter networks.The performed analysis is verified by injecting two independent small-signal perturbations into the d and the q axis,and doing a point-by-point impedance measurement.
文摘Dynamic reactive power compensation equipment typically requires a fast response to output the necessary reactive power.The term"dynamic response time of reactive power"is often used but has never been clearly defined.This paper summarizes the reactive power calculations under different definitions and algorithms and considers these calculations in terms of signal processing to simulate and analyze the step response.This paper subsequently focuses on the widely used instantaneous reactive power algorithm and finally concludes that the dynamic reactive power response time closely depends on the reactive power calculation method itself.The single-phase instantaneous reactive power algorithm has the fastest response time.The reactive power response time of dynamic reactive devices in power systems is a minimum of a quarter of one cycle time for the well-known and widely used single-phase reactive power algorithms.
基金The Swedish Research Council for their financial support
文摘This paper presents calculations of the varying inductances profile for a synchronous linear surface mounted permanent magnet generator in an ABC reference system. Calculations are performed by utilizing the reluctance term, known from analytic calculations and finite element method simulations. With the inductance term identified, the voltage difference between the generator’s no load and load voltage can be calculated and an external circuit can be designed for optimal use of the generator. Two different operation intervals of the linear generator are considered and the results are discussed. The result indicates that time costly finite element simulations can be replaced with simple analytical calculations for a surface mounted permanent magnet linear generator.
