Overstraining gun tubes has a twofold advantage. First, it enables the increase of the Safe Maximum Pressure(SMP) in the tube, resulting in a higher muzzle velocity which extends the gun's range and its projectile...Overstraining gun tubes has a twofold advantage. First, it enables the increase of the Safe Maximum Pressure(SMP) in the tube, resulting in a higher muzzle velocity which extends the gun's range and its projectile kinetic energy. Second, it reduces the tube's susceptibility to internal cracking which prolongs its fatigue life. Unfortunately, autofrettage also bears an inherent detrimental effect as it considerably increases the tensile hoop stress at the outer portion of the barrel's wall, which enhances external cracking of the tube by increasing the prevailing Stress Intensity Factor(SIF). In order to quantify this disadvantageous effect, 3-D Mode I SIFs distributions along the front of a single external radial semielliptical crack initiating from the outer surface of an autofrettaged modern gun barrel, overstrained by either the Swage or the Hydraulic autofrettage processes, are evaluated. The analysis is performed by the finite element(FE) method, using singular elements along the crack front. Innovative residual stress fields(RSFs), incorporating the Bauschinger effect for both types of autofrettage are applied to the barrel.Hill's [1] RSF is also applied to the tube for comparison reasons. All three RSFs are incorporated in the FE analysis, using equivalent temperature fields, Values for K_(IA)-the SIF resulting from the tensile residual stresses induced by autofrettage are evaluated for: a typical barrel of radii ratio R_o/R_i = 2, crack depth to wall-thickness ratios(a/t = 0.005-0.1),crack ellipticities(a/c = 0.2-1.0),and five levels of Swage,Hydraulic and Hill's autofrettage(e = 40%,60%,70%,80%,and 100%). In total,375 different 3-D cases are analyzed. The analysis demonstrates undoubtedly the detrimental effect of all types of autofrettage in increasing the prevailing effective stress intensity factor of external cracks, resulting in crack initiation enhancement and crack growth rate acceleration which considerably shortens the total fatigue life of the barrel. Nonetheless, the detrimental effect is auto展开更多
To investigate the formation of fouling in sewage heat exchangers, a model of thermal resistance with time is developed based on the experiments in a practical engineering site. And this model is asymptotic exponentia...To investigate the formation of fouling in sewage heat exchangers, a model of thermal resistance with time is developed based on the experiments in a practical engineering site. And this model is asymptotic exponential function. According to the characteristic of sewage heat exchangers, the effective thermal resistance and effective coefficient of heat transmission during the formation of fouling are defined. A model for pressure loss of fouling of asymptotic distribution is presented based on the model of thermal resistance of fouling. And the maximum absolute margin of error of the fouling thermal resistance is smaller than the typical allowable error range. The maximum relative error of the heat transfer coefficient is 12%. These can meet the requirements of engineering. The resuhs of experiments provide a basis for further study and application of swage heat exchangers.展开更多
Effects of hydraulic retention time (HRT ) and gas volume on efficiency of wastewater treatment are dis- cussed based on a simulation experiment in which the domestic swage was treated by the two-stage-bio-contact oxi...Effects of hydraulic retention time (HRT ) and gas volume on efficiency of wastewater treatment are dis- cussed based on a simulation experiment in which the domestic swage was treated by the two-stage-bio-contact oxida- tion process. The result shows that the average CODCr, BOD5 , suspended solid (SS), and ammonia-nitrogen removal rate are 94.5 %, 93.2 %, 91.7 % and 46.9 %, respectively, under the conditions of a total air/water ratio of 5∶1 , an air/water ratio of 3:1 for oxidation tank 1 and 2:1for oxidation tank 2and a hydraulic retention time of 1 h for each stage. This method is suitable for domestic sewage treatment of residential community and small towns as well.展开更多
The Ti-36Nb-2Ta-3Zr-0.350 （mass fraction, %） （TNTZO） alloy was produced by cold isostatic pressing and sintering from elemental powders, followed by hot and cold deformation. The effects of deformation process on ...The Ti-36Nb-2Ta-3Zr-0.350 （mass fraction, %） （TNTZO） alloy was produced by cold isostatic pressing and sintering from elemental powders, followed by hot and cold deformation. The effects of deformation process on microstructures and mechanical properties were investigated using the SEM, TEM, OM and the universal material testing machine. Results show that the alloy can be easily hot forged and cold swaged due to the fine-grained microstructure. Only after cold swaging by 85%, the alloy shows the typical ＂marble-like＂ structure. And thecold deformation is accompanied by stress-induced a＂ phase transformations. Moreover, both the strength and the ductility of the alloy are significantly improved by hot and cold working.展开更多
文摘Overstraining gun tubes has a twofold advantage. First, it enables the increase of the Safe Maximum Pressure(SMP) in the tube, resulting in a higher muzzle velocity which extends the gun's range and its projectile kinetic energy. Second, it reduces the tube's susceptibility to internal cracking which prolongs its fatigue life. Unfortunately, autofrettage also bears an inherent detrimental effect as it considerably increases the tensile hoop stress at the outer portion of the barrel's wall, which enhances external cracking of the tube by increasing the prevailing Stress Intensity Factor(SIF). In order to quantify this disadvantageous effect, 3-D Mode I SIFs distributions along the front of a single external radial semielliptical crack initiating from the outer surface of an autofrettaged modern gun barrel, overstrained by either the Swage or the Hydraulic autofrettage processes, are evaluated. The analysis is performed by the finite element(FE) method, using singular elements along the crack front. Innovative residual stress fields(RSFs), incorporating the Bauschinger effect for both types of autofrettage are applied to the barrel.Hill's [1] RSF is also applied to the tube for comparison reasons. All three RSFs are incorporated in the FE analysis, using equivalent temperature fields, Values for K_(IA)-the SIF resulting from the tensile residual stresses induced by autofrettage are evaluated for: a typical barrel of radii ratio R_o/R_i = 2, crack depth to wall-thickness ratios(a/t = 0.005-0.1),crack ellipticities(a/c = 0.2-1.0),and five levels of Swage,Hydraulic and Hill's autofrettage(e = 40%,60%,70%,80%,and 100%). In total,375 different 3-D cases are analyzed. The analysis demonstrates undoubtedly the detrimental effect of all types of autofrettage in increasing the prevailing effective stress intensity factor of external cracks, resulting in crack initiation enhancement and crack growth rate acceleration which considerably shortens the total fatigue life of the barrel. Nonetheless, the detrimental effect is auto
基金Sponsored by the National Natural Science Foundation of China(Grant No. 50578048)
文摘To investigate the formation of fouling in sewage heat exchangers, a model of thermal resistance with time is developed based on the experiments in a practical engineering site. And this model is asymptotic exponential function. According to the characteristic of sewage heat exchangers, the effective thermal resistance and effective coefficient of heat transmission during the formation of fouling are defined. A model for pressure loss of fouling of asymptotic distribution is presented based on the model of thermal resistance of fouling. And the maximum absolute margin of error of the fouling thermal resistance is smaller than the typical allowable error range. The maximum relative error of the heat transfer coefficient is 12%. These can meet the requirements of engineering. The resuhs of experiments provide a basis for further study and application of swage heat exchangers.
文摘Effects of hydraulic retention time (HRT ) and gas volume on efficiency of wastewater treatment are dis- cussed based on a simulation experiment in which the domestic swage was treated by the two-stage-bio-contact oxida- tion process. The result shows that the average CODCr, BOD5 , suspended solid (SS), and ammonia-nitrogen removal rate are 94.5 %, 93.2 %, 91.7 % and 46.9 %, respectively, under the conditions of a total air/water ratio of 5∶1 , an air/water ratio of 3:1 for oxidation tank 1 and 2:1for oxidation tank 2and a hydraulic retention time of 1 h for each stage. This method is suitable for domestic sewage treatment of residential community and small towns as well.
基金Project(2014CB644002)supported by the National Key Fundamental Research and Development Project of ChinaProject(51301203)supported by the National Natural Science Foundation of China+1 种基金Project(2015CX004)supported by the Innovation-driven Plan in Central South University,Chinasupported by the Outstanding Graduate Project of Advanced Non-ferrous Metal Structural Materials and Manufacturing Collaborative Innovation Center,China
文摘The Ti-36Nb-2Ta-3Zr-0.350 （mass fraction, %） （TNTZO） alloy was produced by cold isostatic pressing and sintering from elemental powders, followed by hot and cold deformation. The effects of deformation process on microstructures and mechanical properties were investigated using the SEM, TEM, OM and the universal material testing machine. Results show that the alloy can be easily hot forged and cold swaged due to the fine-grained microstructure. Only after cold swaging by 85%, the alloy shows the typical ＂marble-like＂ structure. And thecold deformation is accompanied by stress-induced a＂ phase transformations. Moreover, both the strength and the ductility of the alloy are significantly improved by hot and cold working.
