Developing the new titanium alloys with excellent biomechanical compatibility has been an important research direction of surgical implants materials. Present paper summarizes the international researches and developm...Developing the new titanium alloys with excellent biomechanical compatibility has been an important research direction of surgical implants materials. Present paper summarizes the international researches and developments of biomedical titanium alloys. Aiming at increasing the biomechanical compatibility, it also introduces the exploration and improvement of alloy designing, mechanical processing, microstructure and phase transformation, and finally outlines the directions for scientific research on the biomedical titanium alloys in the future.展开更多
A new titanium alloy Ti12.5Zr2.5Nb2.5Ta（TZNT） for surgical implant application was synthesized and fully annealed at 700℃for 45 min.The microstructure and the mechanical properties such as tensile properties and fa...A new titanium alloy Ti12.5Zr2.5Nb2.5Ta（TZNT） for surgical implant application was synthesized and fully annealed at 700℃for 45 min.The microstructure and the mechanical properties such as tensile properties and fatigue properties were investigated.The results show that TZNT mainly consists of a lot of lamellaα-phase clusters with different orientations distributed in the originalβ-phase grain boundaries and a small amount ofβphases between the lamella a phases.The alloy exhibits better ductility,lower modulus of elasticity,and lower admission strain in comparison with Ti6A14V and Ti6A17Nb,indicating that it has better biomechanical compatibility with human bones.The fatigue limit of TZNT is 333 MPa,at which the specimen has not failed at 10^7 cycles.A large number of striations present in the stable fatigue crack propagation area,and many dimples in the fast fatigue crack propagation area are observed,indicating the ductile fracture of the new alloy.展开更多
目的探究3D打印多孔结构陶瓷材料外科植入物孔隙结构的宏微观特征分析及评价方法。方法基于微米X射线CT(Micro-CT)扫描获取的多孔样品图像数据,利用VG Studio MAX 3.0软件及Mimics 16.0软件的多孔结构分析功能,对多孔结构的宏观结构特...目的探究3D打印多孔结构陶瓷材料外科植入物孔隙结构的宏微观特征分析及评价方法。方法基于微米X射线CT(Micro-CT)扫描获取的多孔样品图像数据,利用VG Studio MAX 3.0软件及Mimics 16.0软件的多孔结构分析功能,对多孔结构的宏观结构特征包括总孔隙率、宏孔孔径、内连接、开/闭孔率等进行测量和分析;同时,采用扫描电子显微镜对样品表面微观多孔形貌进行特征分析和评价。结果基于Micro-CT和SEM扫描及影像学分析实现了针对3D打印多孔结构陶瓷样件的孔隙结构的宏微观特征表征和统计分析,并验证了其可行性和准确性,形成了一套面向3D打印多孔结构陶瓷材料外科植入物形貌宏微结构尺寸特征的有效的测量和评价方法。结论本文提出的基于Micro-CT和SEM扫描成像进行3D打印多孔结构陶瓷样件的孔隙结构的宏微观特征表征和分析的统计方法,有利于实现多孔结构宏微观特征的相关测试内容和试验过程的规范统一,确保测试过程方法有据可依,结果评价准确有效,有利于提升产品的加工精度,便于不同企业同种工艺制造的多孔结构特征参数之间等同比较,为医疗器械行业多孔结构宏微观特征的数据积累奠定基础,有利于提高与人体生命安全息息相关的外科植入物产品的研发和制造水平。展开更多
文摘Developing the new titanium alloys with excellent biomechanical compatibility has been an important research direction of surgical implants materials. Present paper summarizes the international researches and developments of biomedical titanium alloys. Aiming at increasing the biomechanical compatibility, it also introduces the exploration and improvement of alloy designing, mechanical processing, microstructure and phase transformation, and finally outlines the directions for scientific research on the biomedical titanium alloys in the future.
基金supported by the Shanghai Science and Technology Development Founds(No.08QA14035)the Key Project of Shanghai Science and Technology Commission(No.08520513400).
文摘A new titanium alloy Ti12.5Zr2.5Nb2.5Ta（TZNT） for surgical implant application was synthesized and fully annealed at 700℃for 45 min.The microstructure and the mechanical properties such as tensile properties and fatigue properties were investigated.The results show that TZNT mainly consists of a lot of lamellaα-phase clusters with different orientations distributed in the originalβ-phase grain boundaries and a small amount ofβphases between the lamella a phases.The alloy exhibits better ductility,lower modulus of elasticity,and lower admission strain in comparison with Ti6A14V and Ti6A17Nb,indicating that it has better biomechanical compatibility with human bones.The fatigue limit of TZNT is 333 MPa,at which the specimen has not failed at 10^7 cycles.A large number of striations present in the stable fatigue crack propagation area,and many dimples in the fast fatigue crack propagation area are observed,indicating the ductile fracture of the new alloy.
文摘目的探究3D打印多孔结构陶瓷材料外科植入物孔隙结构的宏微观特征分析及评价方法。方法基于微米X射线CT(Micro-CT)扫描获取的多孔样品图像数据,利用VG Studio MAX 3.0软件及Mimics 16.0软件的多孔结构分析功能,对多孔结构的宏观结构特征包括总孔隙率、宏孔孔径、内连接、开/闭孔率等进行测量和分析;同时,采用扫描电子显微镜对样品表面微观多孔形貌进行特征分析和评价。结果基于Micro-CT和SEM扫描及影像学分析实现了针对3D打印多孔结构陶瓷样件的孔隙结构的宏微观特征表征和统计分析,并验证了其可行性和准确性,形成了一套面向3D打印多孔结构陶瓷材料外科植入物形貌宏微结构尺寸特征的有效的测量和评价方法。结论本文提出的基于Micro-CT和SEM扫描成像进行3D打印多孔结构陶瓷样件的孔隙结构的宏微观特征表征和分析的统计方法,有利于实现多孔结构宏微观特征的相关测试内容和试验过程的规范统一,确保测试过程方法有据可依,结果评价准确有效,有利于提升产品的加工精度,便于不同企业同种工艺制造的多孔结构特征参数之间等同比较,为医疗器械行业多孔结构宏微观特征的数据积累奠定基础,有利于提高与人体生命安全息息相关的外科植入物产品的研发和制造水平。
