蜗杆砂轮磨是广泛应用于中小模数齿轮的批量精加工方法,但在实际加工过程中,蜗杆砂轮磨齿易在齿向形成规则的平行齿面纹理,从而增大了齿轮的啮合噪声。分析磨削过程中蜗杆砂轮与齿轮的接触特性,建立了啮合方程和接触点方程,阐述了接触...蜗杆砂轮磨是广泛应用于中小模数齿轮的批量精加工方法,但在实际加工过程中,蜗杆砂轮磨齿易在齿向形成规则的平行齿面纹理,从而增大了齿轮的啮合噪声。分析磨削过程中蜗杆砂轮与齿轮的接触特性,建立了啮合方程和接触点方程,阐述了接触迹构成整个齿面的机理;分析蜗杆砂轮磨齿的磨削特性,建立瞬时接触点的磨削速度和形状模型,计算磨粒在齿面上的磨削路径,分析磨削特性对齿面微观几何结构的影响,得到齿面的整体纹理模型;结合齿面纹理与噪声激励的关系,分析出齿面规则纹理对齿轮噪声的影响机理,提出按照正弦函数变化的冲程变速蜗杆砂轮磨齿加工方法;进行了蜗杆砂轮磨削常规加工与变冲程速度加工的对比试验,结果表明,该方法加工的齿面接触点位置具有一定的随机性,形成不规则的齿面纹理,不同转速下齿轮啮合噪声声压级总值减小约3.5 d B,已经达到改善齿面纹理的效果。展开更多
In the current practice of multi-axis machining of freeform surfaces, the interface surface between the roughing and finishing process is simply an offset surface of the nominal surface. While there have already been ...In the current practice of multi-axis machining of freeform surfaces, the interface surface between the roughing and finishing process is simply an offset surface of the nominal surface. While there have already been attempts at minimizing the machining time by considering the kinematic capacities of the machine tool and/or the physical constraints such as the cutting force, they all target independently at either the finishing or the roughing process alone and are based on the simple premise of an offset interface surface. Conceivably, since the total machining time should count that of both roughing and finishing process and both of them crucially depend on the interface surface, it is natural to ask if, under the same kinematic capacities and the same physical constraints, there is a nontrivial interface surface whose corresponding total machining time will be the minimum among all the possible（infinite） choices of interface surfaces, and this is the motivation behind the work of this paper. Specifically, with respect to the specific type of iso-planar milling for both roughing and finishing, we present a practical algorithm for determining such an optimal interface surface for an arbitrary freeform surface. While the algorithm is proposed for iso-planar milling, it can be easily adapted to other types of milling strategy such as contour milling. Both computer simulation and physical cutting experiments of the proposed method have convincingly demonstrated its advantages over the traditional simple offset method.展开更多
Turning clearance angle is changed machining characteristics. In this study, the experiments start from choosing two workpiece materials that are machine structural carbon steel, chrome-molyb- denum steel. Then, the e...Turning clearance angle is changed machining characteristics. In this study, the experiments start from choosing two workpiece materials that are machine structural carbon steel, chrome-molyb- denum steel. Then, the experiments show specifically how features of selected materials changed when they were processed with machining operation. In order to find the surface roughness of workpiece materials, the workpiece materials which have higher tensile strength showed much better value of surface roughness in a surface roughness tester. Moreover, process feed rate was compared between 0.05 mm/rev and 0.10 mm/rev. When process feed rate was 0.05 mm/rev, surface roughness has superior results without reference to the quality of the materials.展开更多
Aluminium metal matrix composites are finding increased applications in many areas. Adding of the third element to the metal matrix make the composite hybrid. This paper presents the study on the surface roughness cha...Aluminium metal matrix composites are finding increased applications in many areas. Adding of the third element to the metal matrix make the composite hybrid. This paper presents the study on the surface roughness characteristics of a hybrid aluminium metal matrix (Al6061-SiC-Al2O3) composites. The experimental studies were carried out on a lathe. The composites were prepared using the liquid metallurgy technique, in which 3, 6 and 9 wt % of particulates SiC and Al2O3 were dispersed in the base matrix. The obtained cast composites were carefully machined. The characteristics that influence the surface roughness such as feed rate, depth of cut and cutting speed were studied, which made the analysis come to a conclusion that the surface roughness is increases with the increase of feed rate and it reduces the surface roughness with the increase of cutting speed.展开更多
Surface roughness is an important parameter for ensuring that the dimension of geometry is within the permitted tolerance.The ideal surface roughness is determined by the feed rate and the geometry of the tool.However...Surface roughness is an important parameter for ensuring that the dimension of geometry is within the permitted tolerance.The ideal surface roughness is determined by the feed rate and the geometry of the tool.However,several uncontrollable factors including work material factors,tool angle,and machine tool vibration,may also influence surface roughness.The objective of this study was to compare the measured surface roughness (from experiment) to the theoretical surface roughness (from theoretical calculation) and to investigate the surface roughness resulting from two types of insert,‘C’ type and ‘T’ type.The experiment was focused on the turning process,using a lathe machine Colchester 6000.The feed rate was varied within the recommended feed rate range.We found that there were large deviations between the measured and theoretical surface roughness at a low feed rate (0.05 mm/r) from the application of both inserts.A work material factor of AISI D2 steel that affects the chip character is presumably responsible for this phenomenon.Interestingly,at a high feed rate (0.4 mm/r),the ‘C’ type insert resulted in 40% lower roughness compared to the ‘T’ type due to the difference in insert geometry.This study shows that the geometry of an insert may result in a different surface quality at a particular level of feed rate.展开更多
文摘蜗杆砂轮磨是广泛应用于中小模数齿轮的批量精加工方法,但在实际加工过程中,蜗杆砂轮磨齿易在齿向形成规则的平行齿面纹理,从而增大了齿轮的啮合噪声。分析磨削过程中蜗杆砂轮与齿轮的接触特性,建立了啮合方程和接触点方程,阐述了接触迹构成整个齿面的机理;分析蜗杆砂轮磨齿的磨削特性,建立瞬时接触点的磨削速度和形状模型,计算磨粒在齿面上的磨削路径,分析磨削特性对齿面微观几何结构的影响,得到齿面的整体纹理模型;结合齿面纹理与噪声激励的关系,分析出齿面规则纹理对齿轮噪声的影响机理,提出按照正弦函数变化的冲程变速蜗杆砂轮磨齿加工方法;进行了蜗杆砂轮磨削常规加工与变冲程速度加工的对比试验,结果表明,该方法加工的齿面接触点位置具有一定的随机性,形成不规则的齿面纹理,不同转速下齿轮啮合噪声声压级总值减小约3.5 d B,已经达到改善齿面纹理的效果。
文摘In the current practice of multi-axis machining of freeform surfaces, the interface surface between the roughing and finishing process is simply an offset surface of the nominal surface. While there have already been attempts at minimizing the machining time by considering the kinematic capacities of the machine tool and/or the physical constraints such as the cutting force, they all target independently at either the finishing or the roughing process alone and are based on the simple premise of an offset interface surface. Conceivably, since the total machining time should count that of both roughing and finishing process and both of them crucially depend on the interface surface, it is natural to ask if, under the same kinematic capacities and the same physical constraints, there is a nontrivial interface surface whose corresponding total machining time will be the minimum among all the possible（infinite） choices of interface surfaces, and this is the motivation behind the work of this paper. Specifically, with respect to the specific type of iso-planar milling for both roughing and finishing, we present a practical algorithm for determining such an optimal interface surface for an arbitrary freeform surface. While the algorithm is proposed for iso-planar milling, it can be easily adapted to other types of milling strategy such as contour milling. Both computer simulation and physical cutting experiments of the proposed method have convincingly demonstrated its advantages over the traditional simple offset method.
文摘Turning clearance angle is changed machining characteristics. In this study, the experiments start from choosing two workpiece materials that are machine structural carbon steel, chrome-molyb- denum steel. Then, the experiments show specifically how features of selected materials changed when they were processed with machining operation. In order to find the surface roughness of workpiece materials, the workpiece materials which have higher tensile strength showed much better value of surface roughness in a surface roughness tester. Moreover, process feed rate was compared between 0.05 mm/rev and 0.10 mm/rev. When process feed rate was 0.05 mm/rev, surface roughness has superior results without reference to the quality of the materials.
文摘Aluminium metal matrix composites are finding increased applications in many areas. Adding of the third element to the metal matrix make the composite hybrid. This paper presents the study on the surface roughness characteristics of a hybrid aluminium metal matrix (Al6061-SiC-Al2O3) composites. The experimental studies were carried out on a lathe. The composites were prepared using the liquid metallurgy technique, in which 3, 6 and 9 wt % of particulates SiC and Al2O3 were dispersed in the base matrix. The obtained cast composites were carefully machined. The characteristics that influence the surface roughness such as feed rate, depth of cut and cutting speed were studied, which made the analysis come to a conclusion that the surface roughness is increases with the increase of feed rate and it reduces the surface roughness with the increase of cutting speed.
基金Project supported by the Japan International Cooperation Agency (JICA) for AUNSEED/Net (No.JICA 8123227)a University Malaya Research Grant (UMRG) (No.RG 059 09AET),Malaysia
文摘Surface roughness is an important parameter for ensuring that the dimension of geometry is within the permitted tolerance.The ideal surface roughness is determined by the feed rate and the geometry of the tool.However,several uncontrollable factors including work material factors,tool angle,and machine tool vibration,may also influence surface roughness.The objective of this study was to compare the measured surface roughness (from experiment) to the theoretical surface roughness (from theoretical calculation) and to investigate the surface roughness resulting from two types of insert,‘C’ type and ‘T’ type.The experiment was focused on the turning process,using a lathe machine Colchester 6000.The feed rate was varied within the recommended feed rate range.We found that there were large deviations between the measured and theoretical surface roughness at a low feed rate (0.05 mm/r) from the application of both inserts.A work material factor of AISI D2 steel that affects the chip character is presumably responsible for this phenomenon.Interestingly,at a high feed rate (0.4 mm/r),the ‘C’ type insert resulted in 40% lower roughness compared to the ‘T’ type due to the difference in insert geometry.This study shows that the geometry of an insert may result in a different surface quality at a particular level of feed rate.
