Global warming has greatly threatened the human living environment and carbon capture and storage(CCS)technology is recognized as a promising way to reduce carbon emissions.Mineral storage is considered a reliable opt...Global warming has greatly threatened the human living environment and carbon capture and storage(CCS)technology is recognized as a promising way to reduce carbon emissions.Mineral storage is considered a reliable option for long-term carbon storage.Basalt rich in alkaline earth elements facilitates rapid and permanent CO_(2) fixation as carbonates.However,the complex CO_(2)-fluid-basalt interaction poses challenges for assessing carbon storage potential.Under different reaction conditions,the carbonation products and carbonation rates vary.Carbon mineralization reactions also induce petrophysical and mechanical responses,which have potential risks for the long-term injectivity and the carbon storage safety in basalt reservoirs.In this paper,recent advances in carbon mineralization storage in basalt based on laboratory research are comprehensively reviewed.The assessment methods for carbon storage potential are introduced and the carbon trapping mechanisms are investigated with the identification of the controlling factors.Changes in pore structure,permeability and mechanical properties in both static reactions and reactive percolation experiments are also discussed.This study could provide insight into challenges as well as perspectives for future research.展开更多
Carbon dioxide injection into deep saline aquifers results in a variety of strongly coupled physical and chemical processes. In this study, reactive transport simulations using a 2-D radial model were performed to inv...Carbon dioxide injection into deep saline aquifers results in a variety of strongly coupled physical and chemical processes. In this study, reactive transport simulations using a 2-D radial model were performed to investigate the fate of the injected CO2, the effect of CO2-water-rock interactions on mineral alteration, and the long-term CO2 sequestration mechanisms of the Liujiagou Formation sandstone at the Shenhua CCS（carbon capture and storage） pilot site of China. Carbon dioxide was injected at a constant rate of 0.1 Mt/year for 30 years, and the fluid flow and geochemical transport simulation was run for a period of 10 000 years by the TOUGHREACT code according to the underground conditions of the Liujiagou Formation. The results show that different trapping phases of CO2 vary with time. Sensitivity analyses indicate that plagioclase composition and chlorite presence are the most significant determinants of stable carbonate minerals and CO2 mineral trapping capacity. For arkosic arenite in the Liujiagou Formation, CO2 can be immobilized by precipitation of ankerite, magnesite, siderite, dawsonite, and calcite for different mineral compositions, with Ca（2＋）, Mg（2＋）, Fe（2＋） and Na＋ provided by dissolution of calcite, albite（or oligoclase） and chlorite. This study can provide useful insights into the geochemistry of CO2 storage in other arkosic arenite（feldspar rich sandstone） formations at other pilots or target sites.展开更多
Carbon dioxide(CO2) geosequestration in deep saline aquifers has been currently deemed as a preferable and practicable mitigation means for reducing anthropogenic greenhouse gases(GHGs) emissions to the atmosphere, as...Carbon dioxide(CO2) geosequestration in deep saline aquifers has been currently deemed as a preferable and practicable mitigation means for reducing anthropogenic greenhouse gases(GHGs) emissions to the atmosphere, as deep saline aquifers can offer the greatest potential from a capacity point of view. Hence,research on core-scale CO2/brine multiphase migration processes is of great significance for precisely estimating storage efficiency, ensuring storage security, and predicting the long-term effects of the sequestered CO2in subsurface saline aquifers. This review article initially presents a brief description of the essential aspects of CO2subsurface transport and geological trapping mechanisms, and then outlines the state-of-the-art laboratory core flooding experimental apparatus that has been adopted for simulating CO2injection and migration processes in the literature over the past decade. Finally, a summary of the characteristics, components and applications of publicly reported core flooding equipment as well as major research gaps and areas in need of further study are given in relevance to laboratory-scale core flooding experiments in CO2geosequestration under reservoir conditions.展开更多
This paper compares the techno-economic performances of three technologies for CO2 capture from a lignite-based IGCC power plant located in the Czech Republic:(1)Physical absorption with a Rectisol-based process;(2)Po...This paper compares the techno-economic performances of three technologies for CO2 capture from a lignite-based IGCC power plant located in the Czech Republic:(1)Physical absorption with a Rectisol-based process;(2)Polymeric CO2-selective membrane-based capture;(3)Low-temperature capture.The evaluations show that the IGCC plant with CO2 capture leads to costs of electricity between 91 and 120€·MWh−1,depending on the capture technology employed,compared to 65€·MWh−1 for the power plant without capture.This results in CO2 avoidance costs ranging from 42 to 84€·tCO2,avoided−1,mainly linked to the losses in net power output.From both energy and cost points of view,the low-temperature and Rectisol based CO2 capture processes are the most efficient capture technologies.Furthermore,partial CO2 capture appears as a good mean to ensure early implementation due to the limited increase in CO2 avoidance cost when considering partial capture.To go beyond the two specific CO2-selective membranes considered,a cost/membrane property map for CO2-selective membranes was developed.This map emphasise the need to develop high performance membrane to compete with solvent technology.Finally,the cost of the whole CCS chain was estimated at 54€·tCO2,avoided−1 once pipeline transport and storage are taken into consideration.展开更多
CO_(2) capture and storage(CCS)has been acknowledged as an essential part of a portfolio of technologies that are required to achieve cost-effective long-term CO_(2) mitigation.However,the development progress of CCS ...CO_(2) capture and storage(CCS)has been acknowledged as an essential part of a portfolio of technologies that are required to achieve cost-effective long-term CO_(2) mitigation.However,the development progress of CCS technologies is far behind the targets set by roadmaps,and engineering practices do not lead to commercial deployment.One of the crucial reasons for this delay lies in the unaffordable penalty caused by CO_(2) capture,even though the technology has been commonly recognized as achievable.From the aspects of separation and capture technology innovation,the potential and promising direction for solving this problem were analyzed,and correspondingly,the possible path for deployment of CCS in China was discussed.Under the carbon neutral target recently proposed by the Chinese government,the role of CCS and the key milestones for deployment were indicated.展开更多
The Joule-Thomson effect is one of the important thermodynamic properties in the system relevant to gas switching reforming with carbon capture and storage(CCS). In this work, a set of apparatus was set up to determin...The Joule-Thomson effect is one of the important thermodynamic properties in the system relevant to gas switching reforming with carbon capture and storage(CCS). In this work, a set of apparatus was set up to determine the Joule-Thomson effect of binary mixtures(CO_(2)+ H_(2)). The accuracy of the apparatus was verified by comparing with the experimental data of carbon dioxide. The Joule-Thomson coefficients(μ_(JT)) for(CO_(2)+ H_(2)) binary mixtures with mole fractions of carbon dioxide(x_(CO_(2))= 0.1, 0.26, 0.5,0.86, 0.94) along six isotherms at various pressures were measured. Five equations of state EOSs(PR,SRK, PR, BWR and GERG-2008 equation) were used to calculate the μ_(JT)for both pure systems and binary systems, among which the GERG-2008 predicted best with a wide range of pressure and temperature.Moreover, the Joule-Thomson inversion curves(JTIC) were calculated with five equations of state. A comparison was made between experimental data and predicted data for the inversion curve of CO_(2). The investigated EOSs show a similar prediction of the low-temperature branch of the JTIC for both pure and binary systems, except for the BWRS equation of state. Among all the equations, SRK has the most similar result to GERG-2008 for predicting JTIC.展开更多
Injection of large volumes of carbon dioxide(CO) for the purposes of greenhouse-gas emissions reduction has the potential to induce earthquakes.Operators of proposed projects must therefore take steps to reduce the ri...Injection of large volumes of carbon dioxide(CO) for the purposes of greenhouse-gas emissions reduction has the potential to induce earthquakes.Operators of proposed projects must therefore take steps to reduce the risks posed by this induced seismicity.In this paper,we examine the causes of injection-induced seismicity(IIS),and how it should be monitored and modelled,and thereby mitigated.Many US case studies are found where fluids are injected into layers that are in close proximity to crystalline basement rocks.We investigate this issue further by comparing injection and seismicity in two areas where oilfield wastewater is injected in significant volumes:Oklahoma,where fluids are injected into a basal layer,and Saskatchewan,where fluids are injected into a much shallower layer.We suggest that the different induced seismicity responses in these two areas are at least in part due to these different injection depths.We go on to outline two different approaches for modelling IIS:a statistics based approach and a physical,numerical modelling based approach.Both modelling types have advantages and disadvantages,but share a need to be calibrated with good quality seismic monitoring data if they are to be used with any degree of reliability.We therefore encourage the use of seismic monitoring networks at all future carbon capture and storage(CCS) sites.展开更多
根据二氧化碳减排规划的要求,并充分考虑目前二氧化碳捕集和封存(carbon capture and storage,CCS)技术发展的阶段性与不确定性,建立以阶段综合费用最小为目标函数的发电厂减排规划模型。引入技术成熟度因子,并考虑到发电厂运行参数未...根据二氧化碳减排规划的要求,并充分考虑目前二氧化碳捕集和封存(carbon capture and storage,CCS)技术发展的阶段性与不确定性,建立以阶段综合费用最小为目标函数的发电厂减排规划模型。引入技术成熟度因子,并考虑到发电厂运行参数未来的变化,将CCS技术的阶段性与不确定因素进行量化,依据技术进步率对碳捕集系统减排指标进行分解。采用离散细菌群体趋药性算法(discrete bacterial colony chemotaxis,DBCC)进行求解,通过对实际算例的方针分析,得到系统在不同减排场景下的碳捕集系统最优配置方案与碳捕集系统投资策略。最后通过灵敏度分析得到在不同减排场景下各因素对减排成本的影响。结果证明了所提模型以及优化算法的有效性和正确性。展开更多
基金funding support from the National Key R&D Program of China(Grant No.2022YFE0115800)the Creative Groups of Natural Science Foundation of Hubei Province(Grant No.2021CFA030)Shanxi Provincial Key Research and Development Project(Grant No.202102090301009).
文摘Global warming has greatly threatened the human living environment and carbon capture and storage(CCS)technology is recognized as a promising way to reduce carbon emissions.Mineral storage is considered a reliable option for long-term carbon storage.Basalt rich in alkaline earth elements facilitates rapid and permanent CO_(2) fixation as carbonates.However,the complex CO_(2)-fluid-basalt interaction poses challenges for assessing carbon storage potential.Under different reaction conditions,the carbonation products and carbonation rates vary.Carbon mineralization reactions also induce petrophysical and mechanical responses,which have potential risks for the long-term injectivity and the carbon storage safety in basalt reservoirs.In this paper,recent advances in carbon mineralization storage in basalt based on laboratory research are comprehensively reviewed.The assessment methods for carbon storage potential are introduced and the carbon trapping mechanisms are investigated with the identification of the controlling factors.Changes in pore structure,permeability and mechanical properties in both static reactions and reactive percolation experiments are also discussed.This study could provide insight into challenges as well as perspectives for future research.
基金supported by the Global Climate and Energy Project(No.2384638-43106-A)the National Natural Science Foundation of China(No.41072180)+1 种基金the Special Scientific Research Fund of Public Welfare Profession of the Ministry of Land and Resources of China(No.201211063)a bilateral project of China Australia Geological Storage of CO2 Project Phase 2(CAGS2)
文摘Carbon dioxide injection into deep saline aquifers results in a variety of strongly coupled physical and chemical processes. In this study, reactive transport simulations using a 2-D radial model were performed to investigate the fate of the injected CO2, the effect of CO2-water-rock interactions on mineral alteration, and the long-term CO2 sequestration mechanisms of the Liujiagou Formation sandstone at the Shenhua CCS（carbon capture and storage） pilot site of China. Carbon dioxide was injected at a constant rate of 0.1 Mt/year for 30 years, and the fluid flow and geochemical transport simulation was run for a period of 10 000 years by the TOUGHREACT code according to the underground conditions of the Liujiagou Formation. The results show that different trapping phases of CO2 vary with time. Sensitivity analyses indicate that plagioclase composition and chlorite presence are the most significant determinants of stable carbonate minerals and CO2 mineral trapping capacity. For arkosic arenite in the Liujiagou Formation, CO2 can be immobilized by precipitation of ankerite, magnesite, siderite, dawsonite, and calcite for different mineral compositions, with Ca（2＋）, Mg（2＋）, Fe（2＋） and Na＋ provided by dissolution of calcite, albite（or oligoclase） and chlorite. This study can provide useful insights into the geochemistry of CO2 storage in other arkosic arenite（feldspar rich sandstone） formations at other pilots or target sites.
基金supported by the National Natural Science Foundation of China(Grant No.41274111)the financial support of the National Department Public Benefit Research Foundation of MLR,China(Grant No.201211063-4-1)the One Hundred Talent Program of CAS(Grant No.O931061C01)
文摘Carbon dioxide(CO2) geosequestration in deep saline aquifers has been currently deemed as a preferable and practicable mitigation means for reducing anthropogenic greenhouse gases(GHGs) emissions to the atmosphere, as deep saline aquifers can offer the greatest potential from a capacity point of view. Hence,research on core-scale CO2/brine multiphase migration processes is of great significance for precisely estimating storage efficiency, ensuring storage security, and predicting the long-term effects of the sequestered CO2in subsurface saline aquifers. This review article initially presents a brief description of the essential aspects of CO2subsurface transport and geological trapping mechanisms, and then outlines the state-of-the-art laboratory core flooding experimental apparatus that has been adopted for simulating CO2injection and migration processes in the literature over the past decade. Finally, a summary of the characteristics, components and applications of publicly reported core flooding equipment as well as major research gaps and areas in need of further study are given in relevance to laboratory-scale core flooding experiments in CO2geosequestration under reservoir conditions.
基金This work was supported by the Norway grants,as part of the project NF-CZ08-OV-1-003-2015.
文摘This paper compares the techno-economic performances of three technologies for CO2 capture from a lignite-based IGCC power plant located in the Czech Republic:(1)Physical absorption with a Rectisol-based process;(2)Polymeric CO2-selective membrane-based capture;(3)Low-temperature capture.The evaluations show that the IGCC plant with CO2 capture leads to costs of electricity between 91 and 120€·MWh−1,depending on the capture technology employed,compared to 65€·MWh−1 for the power plant without capture.This results in CO2 avoidance costs ranging from 42 to 84€·tCO2,avoided−1,mainly linked to the losses in net power output.From both energy and cost points of view,the low-temperature and Rectisol based CO2 capture processes are the most efficient capture technologies.Furthermore,partial CO2 capture appears as a good mean to ensure early implementation due to the limited increase in CO2 avoidance cost when considering partial capture.To go beyond the two specific CO2-selective membranes considered,a cost/membrane property map for CO2-selective membranes was developed.This map emphasise the need to develop high performance membrane to compete with solvent technology.Finally,the cost of the whole CCS chain was estimated at 54€·tCO2,avoided−1 once pipeline transport and storage are taken into consideration.
基金the Basic Science Center Program for Ordered Energy Conversion of the National Natural Science Foundation of China(Grant No.51888103).
文摘CO_(2) capture and storage(CCS)has been acknowledged as an essential part of a portfolio of technologies that are required to achieve cost-effective long-term CO_(2) mitigation.However,the development progress of CCS technologies is far behind the targets set by roadmaps,and engineering practices do not lead to commercial deployment.One of the crucial reasons for this delay lies in the unaffordable penalty caused by CO_(2) capture,even though the technology has been commonly recognized as achievable.From the aspects of separation and capture technology innovation,the potential and promising direction for solving this problem were analyzed,and correspondingly,the possible path for deployment of CCS in China was discussed.Under the carbon neutral target recently proposed by the Chinese government,the role of CCS and the key milestones for deployment were indicated.
基金supported by the National Natural Science Foundation of China (21878056)Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology (2019Z002)。
文摘The Joule-Thomson effect is one of the important thermodynamic properties in the system relevant to gas switching reforming with carbon capture and storage(CCS). In this work, a set of apparatus was set up to determine the Joule-Thomson effect of binary mixtures(CO_(2)+ H_(2)). The accuracy of the apparatus was verified by comparing with the experimental data of carbon dioxide. The Joule-Thomson coefficients(μ_(JT)) for(CO_(2)+ H_(2)) binary mixtures with mole fractions of carbon dioxide(x_(CO_(2))= 0.1, 0.26, 0.5,0.86, 0.94) along six isotherms at various pressures were measured. Five equations of state EOSs(PR,SRK, PR, BWR and GERG-2008 equation) were used to calculate the μ_(JT)for both pure systems and binary systems, among which the GERG-2008 predicted best with a wide range of pressure and temperature.Moreover, the Joule-Thomson inversion curves(JTIC) were calculated with five equations of state. A comparison was made between experimental data and predicted data for the inversion curve of CO_(2). The investigated EOSs show a similar prediction of the low-temperature branch of the JTIC for both pure and binary systems, except for the BWRS equation of state. Among all the equations, SRK has the most similar result to GERG-2008 for predicting JTIC.
文摘Injection of large volumes of carbon dioxide(CO) for the purposes of greenhouse-gas emissions reduction has the potential to induce earthquakes.Operators of proposed projects must therefore take steps to reduce the risks posed by this induced seismicity.In this paper,we examine the causes of injection-induced seismicity(IIS),and how it should be monitored and modelled,and thereby mitigated.Many US case studies are found where fluids are injected into layers that are in close proximity to crystalline basement rocks.We investigate this issue further by comparing injection and seismicity in two areas where oilfield wastewater is injected in significant volumes:Oklahoma,where fluids are injected into a basal layer,and Saskatchewan,where fluids are injected into a much shallower layer.We suggest that the different induced seismicity responses in these two areas are at least in part due to these different injection depths.We go on to outline two different approaches for modelling IIS:a statistics based approach and a physical,numerical modelling based approach.Both modelling types have advantages and disadvantages,but share a need to be calibrated with good quality seismic monitoring data if they are to be used with any degree of reliability.We therefore encourage the use of seismic monitoring networks at all future carbon capture and storage(CCS) sites.
