The conventional mould fluxes can not be applied to the continuous casting of RE alloyed heat resistant steel, because severe slag-metal interface reactions occur generally in the mold. To restrain the interface react...The conventional mould fluxes can not be applied to the continuous casting of RE alloyed heat resistant steel, because severe slag-metal interface reactions occur generally in the mold. To restrain the interface reaction and improve conditions for continuous casting, a new mould flux based on aluminate system was devised. The viscous properties were investigated. Scanning electron microscopy and X-ray diffraction were applied to detect and characterize the crystalline phases in the continuous cooling process. The results showed that appropriate addition of CeOcould avoid the precipitation of CaO and decrease the viscosity of the mould flux. Increasing the mass ratio of CaO /AlO, especially to a value exceeding 1, could worsen the stability of the mould flux. With a content of less than 14 wt.%, LiO could reduce the viscosity and breaking temperature, but its effect could be weakened for the promoted precipitation of LiAlO. To obtain a mould flux with stable viscous properties, such as viscosity and breaking temperature, appropriate contents of CeOand LiO should be controlled to around 10 wt.% and 14 wt.%, while the mass ratio of CaO /AlOshould not be more than 1.展开更多
A 2D axisymmetric numerical model was established to investigate the variations of molten pool with different melt rates during the vacuum arc remelting of 8Cr4Mo4V high-strength steel,and the ingot growth was simulat...A 2D axisymmetric numerical model was established to investigate the variations of molten pool with different melt rates during the vacuum arc remelting of 8Cr4Mo4V high-strength steel,and the ingot growth was simulated by dynamic mesh techniques.The results show that as the ingot grows,the molten pool profile changes from shallow and flat to V-shaped,and both the molten pool depth and the mushy width increase.Meanwhile,the variation of both the molten pool shape and the mushy width melt rate is clarified by the thermal equilibrium analysis.As melt rate increases,both the molten pool depth and the mushy width increase.It is caused by the increment in sensible heat stored in the ingot due to the limitation of the cooling capacity of the mold.The nonlinear increment in sensible heat leads to a nonlinear increase in the mushy width.In addition,as melt rate increases,the local solidification time(LST)of ingot decreases obviously at first and then increases.When melt rate is controlled in a suitable range,LST is the lowest and the secondary dendrite arm spacing of the ingot is the smallest,which can effectively improve the compactness degree of 8Cr4Mo4V high-strength steel.展开更多
The effect of tramp elements in the steel was intensively studied. It was found that the solubility of tramp elements decreased as the temperature decreased under normal cooling conditions. The tramp elements （Cu, Pb...The effect of tramp elements in the steel was intensively studied. It was found that the solubility of tramp elements decreased as the temperature decreased under normal cooling conditions. The tramp elements （Cu, Pb, and Sn） diffused toward the grain boundaries, and intermetallic compounds or rich phases which have low melting points were formed, causing reduction in ductility and failure during the bending test. Rebars with Cu content which were left to air cooling after the last step showed drop in elongation, up to 32 %. On contrast, the samples with high per- centage of tramp elements （Cu, Pb, and Sn） in the billet, which were rolled and subjected to Tempcore process, did not show drop in elongation or failure in bending test （especially for rebar with diameter less than 32 mm）; however, copper must be less than 0.35 mass% to prevent the precipitation of Cu-rich zones of critical size in 32 mm. When quench- ing was applied, the tramp elements remained in the interstitial supersaturated solid solution positions inside the grains and would not have the chance to diffuse and form precipitates, hindering the copper precipitates from reac- hing the critical size necessary for impairing the properties. This would hinder the occurrence of the harmful effect of the tramp elements on the elongation or the hot shortness after rolling.展开更多
基金supported by the National Natural Science Foundation of China(51374059,51304042)the Fundamental Research Funds for the Central Universities of China(N130402020)the Key Science and Technology Program of Liaoning Province(2012221013)
文摘The conventional mould fluxes can not be applied to the continuous casting of RE alloyed heat resistant steel, because severe slag-metal interface reactions occur generally in the mold. To restrain the interface reaction and improve conditions for continuous casting, a new mould flux based on aluminate system was devised. The viscous properties were investigated. Scanning electron microscopy and X-ray diffraction were applied to detect and characterize the crystalline phases in the continuous cooling process. The results showed that appropriate addition of CeOcould avoid the precipitation of CaO and decrease the viscosity of the mould flux. Increasing the mass ratio of CaO /AlO, especially to a value exceeding 1, could worsen the stability of the mould flux. With a content of less than 14 wt.%, LiO could reduce the viscosity and breaking temperature, but its effect could be weakened for the promoted precipitation of LiAlO. To obtain a mould flux with stable viscous properties, such as viscosity and breaking temperature, appropriate contents of CeOand LiO should be controlled to around 10 wt.% and 14 wt.%, while the mass ratio of CaO /AlOshould not be more than 1.
基金financially supported by National Natural Science Foundation of China(Nos.U1908223 and U1960203)Fundamental Research Funds for the Central Universities(Grant No.N2125017)Talent Project of Revitalizing Liaoning(Grant No.XLYC1902046).
文摘A 2D axisymmetric numerical model was established to investigate the variations of molten pool with different melt rates during the vacuum arc remelting of 8Cr4Mo4V high-strength steel,and the ingot growth was simulated by dynamic mesh techniques.The results show that as the ingot grows,the molten pool profile changes from shallow and flat to V-shaped,and both the molten pool depth and the mushy width increase.Meanwhile,the variation of both the molten pool shape and the mushy width melt rate is clarified by the thermal equilibrium analysis.As melt rate increases,both the molten pool depth and the mushy width increase.It is caused by the increment in sensible heat stored in the ingot due to the limitation of the cooling capacity of the mold.The nonlinear increment in sensible heat leads to a nonlinear increase in the mushy width.In addition,as melt rate increases,the local solidification time(LST)of ingot decreases obviously at first and then increases.When melt rate is controlled in a suitable range,LST is the lowest and the secondary dendrite arm spacing of the ingot is the smallest,which can effectively improve the compactness degree of 8Cr4Mo4V high-strength steel.
文摘The effect of tramp elements in the steel was intensively studied. It was found that the solubility of tramp elements decreased as the temperature decreased under normal cooling conditions. The tramp elements （Cu, Pb, and Sn） diffused toward the grain boundaries, and intermetallic compounds or rich phases which have low melting points were formed, causing reduction in ductility and failure during the bending test. Rebars with Cu content which were left to air cooling after the last step showed drop in elongation, up to 32 %. On contrast, the samples with high per- centage of tramp elements （Cu, Pb, and Sn） in the billet, which were rolled and subjected to Tempcore process, did not show drop in elongation or failure in bending test （especially for rebar with diameter less than 32 mm）; however, copper must be less than 0.35 mass% to prevent the precipitation of Cu-rich zones of critical size in 32 mm. When quench- ing was applied, the tramp elements remained in the interstitial supersaturated solid solution positions inside the grains and would not have the chance to diffuse and form precipitates, hindering the copper precipitates from reac- hing the critical size necessary for impairing the properties. This would hinder the occurrence of the harmful effect of the tramp elements on the elongation or the hot shortness after rolling.
