Aiming at the position and attitude tracking of coaxial rotor aircraft(CRA),this paper proposes a combinatorial control method of sliding mode control(SMC)coupled with proportional-integralderivative control(PIDC).Con...Aiming at the position and attitude tracking of coaxial rotor aircraft(CRA),this paper proposes a combinatorial control method of sliding mode control(SMC)coupled with proportional-integralderivative control(PIDC).Considering the complete description of flight dynamics,aerodynamics and airflow interference,the dynamical model of CRA is established.The dynamical model is simplified according to the actual flight,then the simplified dynamical model is divided into two subsystems:a fully-actuated subsystem and an under-actuated subsystem.The controller of the fully-actuated subsystem consists of a SMC controller coupled with a rate bounded PIDC controller,while the controller of the under-actuated subsystem is composed of a SMC controller.The sliding manifold is defined by combining the position and velocity tracking errors of the state variables for each subsystem.Lyapunov stability theory is used to verify the stability of the sliding mode controller,which ensures that all state trajectories of the system can reach and stay on the sliding mode surface,the uncertainty and external interference of the model are compensated.Simulation and experiment compared with the conventional PIDC are carried out,the results demonstrate the effectiveness and the robustness of the proposed control method of this paper.展开更多
In this paper, single, two-position, two-way proportional valve is used to carry out the positon control of asymmetrical hydraulic cylinder with two chambers connected. The system structure and the working princle are...In this paper, single, two-position, two-way proportional valve is used to carry out the positon control of asymmetrical hydraulic cylinder with two chambers connected. The system structure and the working princle are introduced. The dynamic model of the asymmetrical hydraulic cylinder system is established with power bond graphs method, and becomes a fundament for analyzing the system. Sliding mode controller is designed, and the stability of the control system is analyzed. The simulation results indicate that the sliding mode controller designed can actualize the position control of asymmetrical hydraulic cylinder system, and controller is superior to traditional PID controller when the load changes in some range.展开更多
In this study,a simple position synchronization control algorithm based on an integral sliding mode is developed for dualarm robotic manipulator systems.A first-order sliding surface is designed using cross-coupling e...In this study,a simple position synchronization control algorithm based on an integral sliding mode is developed for dualarm robotic manipulator systems.A first-order sliding surface is designed using cross-coupling error in order to ensure position synchronization of dual-arm manipulators.The design objective of the proposed controller is to ensure stability as well as to synchronize the movement of both arms while maintaining the trajectory as desired.The integral sliding mode eliminates the reaching phase and guarantees robustness throughout the whole operating period.Additionally,a low pass filter is used to smoothen the discontinuous element and minimize unwanted chattering.Lyapunov stability theory is utilized to prove the asymptotic stability of the controlled system.Simulation studies are performed to validate the proposed controller′s effectiveness.Also,to investigate the possibility of realizing the proposed dynamic control method in practical applications,experiments are conducted on a 14DoF coordinated links(COOL)dual-arm robotic manipulator system.Experimental evidence indicates adequate efficiency in trajectory tracking and guarantees robustness in the presence of parametric uncertainty and external disturbance.展开更多
Adaptive control of servo actuator with nonlinear friction compensation is addressed. LuGre dynamic friction model is adopted to characterize the nonlinear friction and a new kind of slid ing mode observer is designe...Adaptive control of servo actuator with nonlinear friction compensation is addressed. LuGre dynamic friction model is adopted to characterize the nonlinear friction and a new kind of slid ing mode observer is designed to estimate the internal immeasurable state of LuGre model. Based on the estimated friction state, adaptive laws are designed to identify the unknown model parameters and the external disturbances, and the system stability and asymptotic trajectory tracking perform ance are guaranteed by Lyapunov function. The position tracking performance is verified by the ex perimental results.展开更多
As a part of the new energy development trend,distributed power generation may fully utilize a variety of decentralized energy sources.Buildings close to the installation location,besides,may have a considerable impac...As a part of the new energy development trend,distributed power generation may fully utilize a variety of decentralized energy sources.Buildings close to the installation location,besides,may have a considerable impact on the wind turbines’operation.Using a combined vertical axis wind turbine with an S-shaped lift outer blade and-shaped drag inner blade,this paper investigates how a novel type of upstream wall interacts with the incident wind at various speeds,the influence region of the turbulent vortex,and performance variation.The results demonstrate that the building’s turbulence affects the wind’s horizontal and vertical direction,as well as its speed,in downstreamplaces.The wall’s effect on wind speed changing in the downstreamarea is thoroughly investigated.It turns out that while choosing an installation location,disturbing flow areas or low disturbing flow zones should be avoided to have the least impact on wind turbine performance.展开更多
基金supported by National Natural Science Founda-tion of china(Grant No.51774042).
文摘Aiming at the position and attitude tracking of coaxial rotor aircraft(CRA),this paper proposes a combinatorial control method of sliding mode control(SMC)coupled with proportional-integralderivative control(PIDC).Considering the complete description of flight dynamics,aerodynamics and airflow interference,the dynamical model of CRA is established.The dynamical model is simplified according to the actual flight,then the simplified dynamical model is divided into two subsystems:a fully-actuated subsystem and an under-actuated subsystem.The controller of the fully-actuated subsystem consists of a SMC controller coupled with a rate bounded PIDC controller,while the controller of the under-actuated subsystem is composed of a SMC controller.The sliding manifold is defined by combining the position and velocity tracking errors of the state variables for each subsystem.Lyapunov stability theory is used to verify the stability of the sliding mode controller,which ensures that all state trajectories of the system can reach and stay on the sliding mode surface,the uncertainty and external interference of the model are compensated.Simulation and experiment compared with the conventional PIDC are carried out,the results demonstrate the effectiveness and the robustness of the proposed control method of this paper.
基金the National Natural Science Foundation of China(No.50575202)
文摘In this paper, single, two-position, two-way proportional valve is used to carry out the positon control of asymmetrical hydraulic cylinder with two chambers connected. The system structure and the working princle are introduced. The dynamic model of the asymmetrical hydraulic cylinder system is established with power bond graphs method, and becomes a fundament for analyzing the system. Sliding mode controller is designed, and the stability of the control system is analyzed. The simulation results indicate that the sliding mode controller designed can actualize the position control of asymmetrical hydraulic cylinder system, and controller is superior to traditional PID controller when the load changes in some range.
文摘In this study,a simple position synchronization control algorithm based on an integral sliding mode is developed for dualarm robotic manipulator systems.A first-order sliding surface is designed using cross-coupling error in order to ensure position synchronization of dual-arm manipulators.The design objective of the proposed controller is to ensure stability as well as to synchronize the movement of both arms while maintaining the trajectory as desired.The integral sliding mode eliminates the reaching phase and guarantees robustness throughout the whole operating period.Additionally,a low pass filter is used to smoothen the discontinuous element and minimize unwanted chattering.Lyapunov stability theory is utilized to prove the asymptotic stability of the controlled system.Simulation studies are performed to validate the proposed controller′s effectiveness.Also,to investigate the possibility of realizing the proposed dynamic control method in practical applications,experiments are conducted on a 14DoF coordinated links(COOL)dual-arm robotic manipulator system.Experimental evidence indicates adequate efficiency in trajectory tracking and guarantees robustness in the presence of parametric uncertainty and external disturbance.
基金Supported by State Key Laboratory of Explosion Science and Technology(QNKT11-08)
文摘Adaptive control of servo actuator with nonlinear friction compensation is addressed. LuGre dynamic friction model is adopted to characterize the nonlinear friction and a new kind of slid ing mode observer is designed to estimate the internal immeasurable state of LuGre model. Based on the estimated friction state, adaptive laws are designed to identify the unknown model parameters and the external disturbances, and the system stability and asymptotic trajectory tracking perform ance are guaranteed by Lyapunov function. The position tracking performance is verified by the ex perimental results.
基金supported in part by the Provincial,Municipal and Autonomous Region Science and Technology Project Funds of China 2021GG0336 and 2016030331。
文摘As a part of the new energy development trend,distributed power generation may fully utilize a variety of decentralized energy sources.Buildings close to the installation location,besides,may have a considerable impact on the wind turbines’operation.Using a combined vertical axis wind turbine with an S-shaped lift outer blade and-shaped drag inner blade,this paper investigates how a novel type of upstream wall interacts with the incident wind at various speeds,the influence region of the turbulent vortex,and performance variation.The results demonstrate that the building’s turbulence affects the wind’s horizontal and vertical direction,as well as its speed,in downstreamplaces.The wall’s effect on wind speed changing in the downstreamarea is thoroughly investigated.It turns out that while choosing an installation location,disturbing flow areas or low disturbing flow zones should be avoided to have the least impact on wind turbine performance.
