土石混合体介质具有高度非均质性、显著的结构效应与尺寸效应等特点,这使其物理力学特性及其复杂。本文针对土石混合体在剪切过程中剪切带的变形性状与影响因素,采用自主研发的RSM–1000型电机伺服控制大型土工抗剪强度试验系统,考虑不...土石混合体介质具有高度非均质性、显著的结构效应与尺寸效应等特点,这使其物理力学特性及其复杂。本文针对土石混合体在剪切过程中剪切带的变形性状与影响因素,采用自主研发的RSM–1000型电机伺服控制大型土工抗剪强度试验系统,考虑不同含石量(0,30%,50%,70%)、上覆压力(50,200,300,400 k Pa)、块石尺寸(L1,L2,L3)3个主要结构控制因素,进行土石混合体剪切变形试验,通过在试样内部钻孔设置铝丝与干灰的方法,监测剪切带特征变化规律。研究结果表明:当含石量小于30%时,块石对试样的变形影响较小,强度主要依赖于砂土强度;当含石量达到50%时,试样内已形成骨架结构,变形受块石的影响突显,强度由块石和砂土共同作用;当含石量达到70%时,试样内已形成块石架空结构。在高含石量与大粒径块石条件下,含贯穿剪切面的块石试样随剪切变形发展,块石发生挤压、翻转现象;剪切面附近分布块石的试样,随剪切变形发展,块石以剪胀作用为主,块石发生挤压、棱角剪断与错动重分布。试样的剪切变形现象可类比由后向前变形的推移式滑坡或由前后向中间变形的复合式滑坡的破坏特征,即后缘坡顶在主动土压力作用下产生裂隙,随之下沉挤密、失稳起滑;前缘坡脚蠕滑变形推移;坡中岩土体发生剪切错动至滑动面渐进扩展破坏,最终剪切面贯通,形成整体破坏。该研究成果对揭示土石混合体滑坡剪切带形成演化规律、破坏模式及土石混合体滑坡的防灾减灾具有重要意义。展开更多
The engraving process of a projectile rotating band is one of the most basic research aspects in interior ballistics,which has not been thoroughly understood thus far.An understanding of this process is of great impor...The engraving process of a projectile rotating band is one of the most basic research aspects in interior ballistics,which has not been thoroughly understood thus far.An understanding of this process is of great importance from the viewpoints of optimal design,manufacturing,use,and maintenance of gun and projectile.In this paper,the interaction of copper and nylon rotating bands with a CrNiMo gun barrel during engraving was studied under quasi‐static and dynamic loading conditions.The quasi‐static engraving tests were performed on a CSS‐88500 electronic universal testing machine(EUTM)and a special gas‐gun‐based test rig was designed for dynamic impact engraving of the rotating bands.The mechanical behaviors of copper and nylon were investigated under strain rates of 10^(−3) s^(−1) and 2×10^(3) s^(−1) using an MTS 810 and a split Hopkinson pressure bar(SHPB),respectively.Morphologies of the worn surfaces and cross‐sectional microstructures were observed with scanning electron microscope(SEM)and optical microscope(OM).It was found that large deformation and severe friction occur during engraving.The surface layer is condensed and correlated with a hardness gradient along the depth from the top worn surface.The structure of the rotating band and gun bore,band material,and loading rate have great effects on band engraving.The flow stress‐strain of the copper strongly depends on the applied strain rate.It is suggested that strain rate and temperature play significant roles in the deformation mechanism of rotating bands.展开更多
文摘土石混合体介质具有高度非均质性、显著的结构效应与尺寸效应等特点,这使其物理力学特性及其复杂。本文针对土石混合体在剪切过程中剪切带的变形性状与影响因素,采用自主研发的RSM–1000型电机伺服控制大型土工抗剪强度试验系统,考虑不同含石量(0,30%,50%,70%)、上覆压力(50,200,300,400 k Pa)、块石尺寸(L1,L2,L3)3个主要结构控制因素,进行土石混合体剪切变形试验,通过在试样内部钻孔设置铝丝与干灰的方法,监测剪切带特征变化规律。研究结果表明:当含石量小于30%时,块石对试样的变形影响较小,强度主要依赖于砂土强度;当含石量达到50%时,试样内已形成骨架结构,变形受块石的影响突显,强度由块石和砂土共同作用;当含石量达到70%时,试样内已形成块石架空结构。在高含石量与大粒径块石条件下,含贯穿剪切面的块石试样随剪切变形发展,块石发生挤压、翻转现象;剪切面附近分布块石的试样,随剪切变形发展,块石以剪胀作用为主,块石发生挤压、棱角剪断与错动重分布。试样的剪切变形现象可类比由后向前变形的推移式滑坡或由前后向中间变形的复合式滑坡的破坏特征,即后缘坡顶在主动土压力作用下产生裂隙,随之下沉挤密、失稳起滑;前缘坡脚蠕滑变形推移;坡中岩土体发生剪切错动至滑动面渐进扩展破坏,最终剪切面贯通,形成整体破坏。该研究成果对揭示土石混合体滑坡剪切带形成演化规律、破坏模式及土石混合体滑坡的防灾减灾具有重要意义。
基金This work was financially supported by the National Natural Science Foundation of China(NSFC)under Grant No.51175512.
文摘The engraving process of a projectile rotating band is one of the most basic research aspects in interior ballistics,which has not been thoroughly understood thus far.An understanding of this process is of great importance from the viewpoints of optimal design,manufacturing,use,and maintenance of gun and projectile.In this paper,the interaction of copper and nylon rotating bands with a CrNiMo gun barrel during engraving was studied under quasi‐static and dynamic loading conditions.The quasi‐static engraving tests were performed on a CSS‐88500 electronic universal testing machine(EUTM)and a special gas‐gun‐based test rig was designed for dynamic impact engraving of the rotating bands.The mechanical behaviors of copper and nylon were investigated under strain rates of 10^(−3) s^(−1) and 2×10^(3) s^(−1) using an MTS 810 and a split Hopkinson pressure bar(SHPB),respectively.Morphologies of the worn surfaces and cross‐sectional microstructures were observed with scanning electron microscope(SEM)and optical microscope(OM).It was found that large deformation and severe friction occur during engraving.The surface layer is condensed and correlated with a hardness gradient along the depth from the top worn surface.The structure of the rotating band and gun bore,band material,and loading rate have great effects on band engraving.The flow stress‐strain of the copper strongly depends on the applied strain rate.It is suggested that strain rate and temperature play significant roles in the deformation mechanism of rotating bands.
