A versatile wet chemistry method is developed for filling of subnanometer sized metal particles in carbon nanotubes with a diameter smaller than 1.5 nm. As an example, we showed that a confined bi-component Pd-V catal...A versatile wet chemistry method is developed for filling of subnanometer sized metal particles in carbon nanotubes with a diameter smaller than 1.5 nm. As an example, we showed that a confined bi-component Pd-V catalyst exhibit a higher benzene hydroxylation activity compared with that within multi-walled carbon nanotubes.展开更多
The adsorptions of rare-earth （RE） atoms on （6, 0） and （8, 0） single-walled carbon nanotubes （SWCNTs） have been investigated by using the first-principles pseudopotential plane wave method within density funct...The adsorptions of rare-earth （RE） atoms on （6, 0） and （8, 0） single-walled carbon nanotubes （SWCNTs） have been investigated by using the first-principles pseudopotential plane wave method within density functional theory （DFT）. The binding energy, Mulliken charge, magnetic properties, band structure and DOS were calculated and analyzed. Most of RE atoms including Nd, Sm and Eu have a magnetic ground state with a significant magnetic moment. Some electrons transfer between RE-5d, 6s and C-2p orbitals. Owing to the curvature effect, the values of binding energy for RE atoms doped （6, 0） SWCNT are lower than those of the same atoms on （8, 0） SWCNT. The pictures of DOS show that hybridizations between RE-5d, 6s states and C-2p orbitals and between RE-4f and C-2p orbitals appear near the Fermi level. Results indicate that the properties of SWCNTs can be modified by the adsorptions of RE atoms.展开更多
This paper describes a realizable fabrication method to manufacture chemical gas sensors by using singlewalled carbon nanotubes(SWCNTs).The sensors were tested for the monitoring of SF_6 decomposition gas produced by ...This paper describes a realizable fabrication method to manufacture chemical gas sensors by using singlewalled carbon nanotubes(SWCNTs).The sensors were tested for the monitoring of SF_6 decomposition gas produced by partial discharge(PD) in GIS tank.The results showed a superior sensitivity,favorable reliability and good reproducibility. For further clarifying the relativity between sensor response and partial discharge activity,the discharge in GIS tank was monitored simultaneously through conventional pulse current method and a SWCNTs gas sensor,and the measurement results were put together for comparative analysis in this paper.The sensor response showed a great dependence on partial discharge characteristics.The sensor response increased nearly linearly with limits when the energy of discharge was persistently accumulated.Partial discharge power had a great influence on the response rate and the time delay.With the increase of partial discharge power,the response rate augmented almost in proportion while the time delay gradually becomes shorter with limits.The results were quite favorable to assess the partial discharge intensity and duration to some extent.Compared with pulse current method,the sensor was predominant to detect partial discharge exposed to constantly high levels of noise.It was capable of detecting partial discharge which was too weak to be detected with pulse current method.However,the sensor response didn't show much dependency on the apparent discharge of partial discharge.展开更多
In this study, a model for dynamic instability of embedded single-walled car- bon nanotubes （SWCNTs） is presented. SWCNTs are modeled by the sinusoidal shear deformation beam theory （SSDBT）. The modified couple st...In this study, a model for dynamic instability of embedded single-walled car- bon nanotubes （SWCNTs） is presented. SWCNTs are modeled by the sinusoidal shear deformation beam theory （SSDBT）. The modified couple stress theory （MCST） is con- sidered in order to capture the size effects. The surrounding elastic medium is described by a visco-Pasternak foundation model, which accounts for normal, transverse shear, and damping loads. The motion equations are derived based on Hamilton＇s principle. The differential quadrature method （DQM） in conjunction with the Bolotin method is used in order to calculate the dynamic instability region （DIR） of SWCNTs. The effects of differ- ent parameters, such as nonlocal parameter, visco-Pasternak foundation, mode numbers, and geometrical parameters, are shown on the dynamic instability of SWCNTs. The re- sults depict that increasing the nonlocal parameter shifts the DIR to right. The results presented in this paper would be helpful in design and manufacturing of nano-electromechanical system （NEMS） and micro-electro-mechanical system （MEMS）.展开更多
The sonication-driven dispersion of single-walled carbon nanotubes (SWCNTs) in aqueous surfactant solution has been monitored by UV-vis-NIR spectroscopy and scanning electron microscopy. Dispersion of SWCNTs experimen...The sonication-driven dispersion of single-walled carbon nanotubes (SWCNTs) in aqueous surfactant solution has been monitored by UV-vis-NIR spectroscopy and scanning electron microscopy. Dispersion of SWCNTs experiments reveal that the maximum concentration of dispersed SWCNTs corresponds to the maximum UV-vis-NIR absorbance of the solution. With higher surfactant concentration the dispersion rate of SWCNTs increases and low temperature sonication is required to achieve maximum dispersion. Dispersion of higher SWCNT concentrations requires longer sonication time. For effective dispersion the optimal concentration of surfactant is 1.5 wt%, the concentration of SWCNTs that can be homogeneously dispersed in aqueous solution is about 0.4 mg/ml.展开更多
In this study, we presented the preparation of β-cyclodextrin (β-CD) covalently functionalized single-walled carbon nanotubes (SWCNTs) and its application in modifying the solid glass carbon electrode (GCE). Cyclic ...In this study, we presented the preparation of β-cyclodextrin (β-CD) covalently functionalized single-walled carbon nanotubes (SWCNTs) and its application in modifying the solid glass carbon electrode (GCE). Cyclic voltammetry (CV) method was employed to evaluate the performance of the modified GCE. Solubility experiment indicated the conjugation of SWCNTs and β-CD, SWCNTs-β-CD with 8 wt% β-CD content could be well dispersed in water. High-resolution transmission electron microscopy (HRTEM) demonstrated that the aggregated SWCNTs bundle were effectively exfoliated to small bundle, even individual tube. The β-CD component was grafted on the side walls as well as tips of SWCNTs, and the grafted β-CD component was not uniformly coated on the surface of SWCNTs. The CV measurements indicated the performance of the GCE modified by SWCNTs-β-CD was better than that of the GCE modified by the hybrid of SWCNTs/β-CD, where ascorbic acid (AA) and uric acid (UA) were selected as a prelimiltary substrate to evaluate it. The enhanced performance of the modified GCE should be ascribed to the integration of the excellent electrocatalytic property of SWCNTs with the inclusion ability of β-CD to analyte molecule.展开更多
Tungsten is one of the best candidates for plasma-facing components in fusion reactors owing to its unique properties. But disadvantages such as its brittleness and high ductile-to-brittle transition temperature have ...Tungsten is one of the best candidates for plasma-facing components in fusion reactors owing to its unique properties. But disadvantages such as its brittleness and high ductile-to-brittle transition temperature have restricted its fusion energy application. Single-walled carbon nanotubes （SWCNTs） have the potential to be used as reinforcements due to their excellent mechanical properties. A new method of modifying the properties of tungsten by doping with SWCNTs was introduced. An efficient way of dispersing SWCNTs into the tungsten matrix with strong interfaces by heterocoagulation and ultrasonication was employed, and hot explosive compaction （HEC） technology was selected to compact and sinter the composite powders. The sintering properties, microstructure, densification effect, thermal conductivity, hardness and fracture toughness of the obtained SWCNTs/W bulk samples were tested, and compared with pure tungsten. The influences of SWCNTs on these properties and the main toughening mechanism of SWCNTs in a tungsten matrix were discussed.展开更多
基金supported by the National Natural Science Foundation of China (Grant No 21173215, 21033009 and 11079005)
文摘A versatile wet chemistry method is developed for filling of subnanometer sized metal particles in carbon nanotubes with a diameter smaller than 1.5 nm. As an example, we showed that a confined bi-component Pd-V catalyst exhibit a higher benzene hydroxylation activity compared with that within multi-walled carbon nanotubes.
文摘The adsorptions of rare-earth （RE） atoms on （6, 0） and （8, 0） single-walled carbon nanotubes （SWCNTs） have been investigated by using the first-principles pseudopotential plane wave method within density functional theory （DFT）. The binding energy, Mulliken charge, magnetic properties, band structure and DOS were calculated and analyzed. Most of RE atoms including Nd, Sm and Eu have a magnetic ground state with a significant magnetic moment. Some electrons transfer between RE-5d, 6s and C-2p orbitals. Owing to the curvature effect, the values of binding energy for RE atoms doped （6, 0） SWCNT are lower than those of the same atoms on （8, 0） SWCNT. The pictures of DOS show that hybridizations between RE-5d, 6s states and C-2p orbitals and between RE-4f and C-2p orbitals appear near the Fermi level. Results indicate that the properties of SWCNTs can be modified by the adsorptions of RE atoms.
基金Supported by National Natural Science Foundation of China(50707023)
文摘This paper describes a realizable fabrication method to manufacture chemical gas sensors by using singlewalled carbon nanotubes(SWCNTs).The sensors were tested for the monitoring of SF_6 decomposition gas produced by partial discharge(PD) in GIS tank.The results showed a superior sensitivity,favorable reliability and good reproducibility. For further clarifying the relativity between sensor response and partial discharge activity,the discharge in GIS tank was monitored simultaneously through conventional pulse current method and a SWCNTs gas sensor,and the measurement results were put together for comparative analysis in this paper.The sensor response showed a great dependence on partial discharge characteristics.The sensor response increased nearly linearly with limits when the energy of discharge was persistently accumulated.Partial discharge power had a great influence on the response rate and the time delay.With the increase of partial discharge power,the response rate augmented almost in proportion while the time delay gradually becomes shorter with limits.The results were quite favorable to assess the partial discharge intensity and duration to some extent.Compared with pulse current method,the sensor was predominant to detect partial discharge exposed to constantly high levels of noise.It was capable of detecting partial discharge which was too weak to be detected with pulse current method.However,the sensor response didn't show much dependency on the apparent discharge of partial discharge.
文摘In this study, a model for dynamic instability of embedded single-walled car- bon nanotubes （SWCNTs） is presented. SWCNTs are modeled by the sinusoidal shear deformation beam theory （SSDBT）. The modified couple stress theory （MCST） is con- sidered in order to capture the size effects. The surrounding elastic medium is described by a visco-Pasternak foundation model, which accounts for normal, transverse shear, and damping loads. The motion equations are derived based on Hamilton＇s principle. The differential quadrature method （DQM） in conjunction with the Bolotin method is used in order to calculate the dynamic instability region （DIR） of SWCNTs. The effects of differ- ent parameters, such as nonlocal parameter, visco-Pasternak foundation, mode numbers, and geometrical parameters, are shown on the dynamic instability of SWCNTs. The re- sults depict that increasing the nonlocal parameter shifts the DIR to right. The results presented in this paper would be helpful in design and manufacturing of nano-electromechanical system （NEMS） and micro-electro-mechanical system （MEMS）.
文摘The sonication-driven dispersion of single-walled carbon nanotubes (SWCNTs) in aqueous surfactant solution has been monitored by UV-vis-NIR spectroscopy and scanning electron microscopy. Dispersion of SWCNTs experiments reveal that the maximum concentration of dispersed SWCNTs corresponds to the maximum UV-vis-NIR absorbance of the solution. With higher surfactant concentration the dispersion rate of SWCNTs increases and low temperature sonication is required to achieve maximum dispersion. Dispersion of higher SWCNT concentrations requires longer sonication time. For effective dispersion the optimal concentration of surfactant is 1.5 wt%, the concentration of SWCNTs that can be homogeneously dispersed in aqueous solution is about 0.4 mg/ml.
文摘In this study, we presented the preparation of β-cyclodextrin (β-CD) covalently functionalized single-walled carbon nanotubes (SWCNTs) and its application in modifying the solid glass carbon electrode (GCE). Cyclic voltammetry (CV) method was employed to evaluate the performance of the modified GCE. Solubility experiment indicated the conjugation of SWCNTs and β-CD, SWCNTs-β-CD with 8 wt% β-CD content could be well dispersed in water. High-resolution transmission electron microscopy (HRTEM) demonstrated that the aggregated SWCNTs bundle were effectively exfoliated to small bundle, even individual tube. The β-CD component was grafted on the side walls as well as tips of SWCNTs, and the grafted β-CD component was not uniformly coated on the surface of SWCNTs. The CV measurements indicated the performance of the GCE modified by SWCNTs-β-CD was better than that of the GCE modified by the hybrid of SWCNTs/β-CD, where ascorbic acid (AA) and uric acid (UA) were selected as a prelimiltary substrate to evaluate it. The enhanced performance of the modified GCE should be ascribed to the integration of the excellent electrocatalytic property of SWCNTs with the inclusion ability of β-CD to analyte molecule.
基金the Chinese National Magnetic Confnement Fusion Program (No.2010GB109000)the National Natural Science Foundation of China (No.51172016)the Opening Research Issues of Jiangxi Key Laboratory of Advanced Copper and Tungsten Materials (No.2010-WT-04)
文摘Tungsten is one of the best candidates for plasma-facing components in fusion reactors owing to its unique properties. But disadvantages such as its brittleness and high ductile-to-brittle transition temperature have restricted its fusion energy application. Single-walled carbon nanotubes （SWCNTs） have the potential to be used as reinforcements due to their excellent mechanical properties. A new method of modifying the properties of tungsten by doping with SWCNTs was introduced. An efficient way of dispersing SWCNTs into the tungsten matrix with strong interfaces by heterocoagulation and ultrasonication was employed, and hot explosive compaction （HEC） technology was selected to compact and sinter the composite powders. The sintering properties, microstructure, densification effect, thermal conductivity, hardness and fracture toughness of the obtained SWCNTs/W bulk samples were tested, and compared with pure tungsten. The influences of SWCNTs on these properties and the main toughening mechanism of SWCNTs in a tungsten matrix were discussed.
基金Project supported by the National Natural Science Foundation of China(Nos.21322702,21137003,and 41273125)the National Science&Technology Pillar Program of China(No.2013BAC01B01)+1 种基金the Zhejiang Provincial Natural Science Foundation of China(No.R5110004)the Fundamental Research Funds for the Central Universities(No.2014XZZX003-30),China
