Synthetic zircon(ZrSiO_(4))ceramics are typically fabricated at elevated temperatures(over 1500℃),which would lead to high manufacturing cost.Meanwhile,reports about preparing ZrSiO_(4)-based ceramic composites via c...Synthetic zircon(ZrSiO_(4))ceramics are typically fabricated at elevated temperatures(over 1500℃),which would lead to high manufacturing cost.Meanwhile,reports about preparing ZrSiO_(4)-based ceramic composites via controlling the solid-state reaction between zirconia(ZrO_(2))and silica(SiO_(2))are limited.In this work,we proposed a low-temperature strategy to flexibly design and fabricate ZrSiO_(4)-based ceramic composites via doping and tuning the solid-state reaction.Two ceramic composites and ZrSiO_(4) ceramics were in-situ prepared by reactive fast hot pressing(FHP)at approximately 1250℃ based on the proposed strategy,i.e.,a ZrSiO_(4)-SiO_(2) dual-phase composite with bicontinuous interpenetrating and hierarchical microstructures,a ZrSiO_(4)-ZrO_(2) dual-phase composite with a microstructure of ZrO_(2) submicron-and nano-particles embedded in a micron ZrSiO_(4) matrix,and ZrSiO_(4) ceramics with a small amount of residual ZrO_(2) nanoparticles.The results showed that the phase compositions,microstructure configurations,mechanical properties,and wear resistance of the materials can be flexibly regulated by the proposed strategy.Hence,ZrSiO_(4)-based ceramic composites with different properties can be easily fabricated based on different application scenarios.These findings would offer useful guidance for researchers to flexibly fabricate ZrSiO_(4)-based ceramic composites at low temperatures and tailor their microstructures and properties through doping and tuning the solid-state reaction.展开更多
Herein,graphene oxide(GO)-encapsulated silica(SiO 2)hybrids(GO@SiO 2)were prepared via electrostatic self-assembly of the 3-aminopropyltriethoxysilane(APS)-modified SiO_(2) and GO.The as-prepared GO@SiO 2 was introduc...Herein,graphene oxide(GO)-encapsulated silica(SiO 2)hybrids(GO@SiO 2)were prepared via electrostatic self-assembly of the 3-aminopropyltriethoxysilane(APS)-modified SiO_(2) and GO.The as-prepared GO@SiO 2 was introduced into polydimethyl-siloxane(PDMS)elastomer to simultaneously increase the dielectric constant(k)and mechanical properties of PDMS.Then,the in situ thermal reduction of GO@SiO_(2)/PDMS composites was conducted at 180℃ for 2 h to increase the interfacial polariz-ability of GO@SiO_(2).As a result,the values of k at 1000 Hz are largely improved from 3.2 for PDMS to 13.3 for the reduced GO@SiO_(2)(RGO@SiO_(2))/PDMS elastomer.Meanwhile,the dielectric loss of the composites remains low(<0.2 at 1000 Hz).More importantly,the actuated strain at low electric field(5 kV/mm)obviously increases from 0.3%for pure PDMS to 2.59%for the composites with 60 phr of RGO@SiO_(2),an eightfold increase in the actuated strain.In addition,both the tensile strength and elastic modulus are obviously improved by adding 60 phr of RGO@SiO_(2),indicating a good reinforcing effect of RGO@SiO_(2) on PDMS.Our goal is to develop a simple and effective way to improve the actuated performance and mechanical strength of the PDMS dielectric elastomer for its wider application.展开更多
The influences of hydrophobic SiO_2 nanoparticles and the contents of glucose oxidase(GOD) upon the response current of enzyme electrode have been investigated by using the sol-gel method,in which polyvinylbutyryl(PVB...The influences of hydrophobic SiO_2 nanoparticles and the contents of glucose oxidase(GOD) upon the response current of enzyme electrode have been investigated by using the sol-gel method,in which polyvinylbutyryl(PVB)was used as a matrix.The influenoe of enzymatic activity was measured by electrochemical method.Experimental data demonstrated that hydrophobic SiO_2 particles can immobilize enzyme well,providing a good and simple method for preparing high quality GOD biosensor.The mechanism has been discussed.展开更多
基金the financial support of the National Natural Science Foundation of China(52102084)Natural Science Foundation of Hunan Province(2022JJ30718)+1 种基金the financial support of the Youth Innovation Promotion Association Chinese Academy of Sciences(CAS)(2022428)the Science Fund of Shandong Laboratory of Yantai Advanced Materials and Green Manufacturing(AMGM2021A08).
文摘Synthetic zircon(ZrSiO_(4))ceramics are typically fabricated at elevated temperatures(over 1500℃),which would lead to high manufacturing cost.Meanwhile,reports about preparing ZrSiO_(4)-based ceramic composites via controlling the solid-state reaction between zirconia(ZrO_(2))and silica(SiO_(2))are limited.In this work,we proposed a low-temperature strategy to flexibly design and fabricate ZrSiO_(4)-based ceramic composites via doping and tuning the solid-state reaction.Two ceramic composites and ZrSiO_(4) ceramics were in-situ prepared by reactive fast hot pressing(FHP)at approximately 1250℃ based on the proposed strategy,i.e.,a ZrSiO_(4)-SiO_(2) dual-phase composite with bicontinuous interpenetrating and hierarchical microstructures,a ZrSiO_(4)-ZrO_(2) dual-phase composite with a microstructure of ZrO_(2) submicron-and nano-particles embedded in a micron ZrSiO_(4) matrix,and ZrSiO_(4) ceramics with a small amount of residual ZrO_(2) nanoparticles.The results showed that the phase compositions,microstructure configurations,mechanical properties,and wear resistance of the materials can be flexibly regulated by the proposed strategy.Hence,ZrSiO_(4)-based ceramic composites with different properties can be easily fabricated based on different application scenarios.These findings would offer useful guidance for researchers to flexibly fabricate ZrSiO_(4)-based ceramic composites at low temperatures and tailor their microstructures and properties through doping and tuning the solid-state reaction.
基金We would like to express our sincere thanks to the National Natural Science Foundation of China[grant number 51173007],[grant number 51103090],[grant number 51221002]for financial support.
文摘Herein,graphene oxide(GO)-encapsulated silica(SiO 2)hybrids(GO@SiO 2)were prepared via electrostatic self-assembly of the 3-aminopropyltriethoxysilane(APS)-modified SiO_(2) and GO.The as-prepared GO@SiO 2 was introduced into polydimethyl-siloxane(PDMS)elastomer to simultaneously increase the dielectric constant(k)and mechanical properties of PDMS.Then,the in situ thermal reduction of GO@SiO_(2)/PDMS composites was conducted at 180℃ for 2 h to increase the interfacial polariz-ability of GO@SiO_(2).As a result,the values of k at 1000 Hz are largely improved from 3.2 for PDMS to 13.3 for the reduced GO@SiO_(2)(RGO@SiO_(2))/PDMS elastomer.Meanwhile,the dielectric loss of the composites remains low(<0.2 at 1000 Hz).More importantly,the actuated strain at low electric field(5 kV/mm)obviously increases from 0.3%for pure PDMS to 2.59%for the composites with 60 phr of RGO@SiO_(2),an eightfold increase in the actuated strain.In addition,both the tensile strength and elastic modulus are obviously improved by adding 60 phr of RGO@SiO_(2),indicating a good reinforcing effect of RGO@SiO_(2) on PDMS.Our goal is to develop a simple and effective way to improve the actuated performance and mechanical strength of the PDMS dielectric elastomer for its wider application.
文摘The influences of hydrophobic SiO_2 nanoparticles and the contents of glucose oxidase(GOD) upon the response current of enzyme electrode have been investigated by using the sol-gel method,in which polyvinylbutyryl(PVB)was used as a matrix.The influenoe of enzymatic activity was measured by electrochemical method.Experimental data demonstrated that hydrophobic SiO_2 particles can immobilize enzyme well,providing a good and simple method for preparing high quality GOD biosensor.The mechanism has been discussed.
