Segregation and mixing of granular materials are complex processes and are not fully understood. Motivated by industrial need, we performed a simulation using the discrete element method to study size segregation of a...Segregation and mixing of granular materials are complex processes and are not fully understood. Motivated by industrial need, we performed a simulation using the discrete element method to study size segregation of a binary mixture of granular particles in a horizontal rotating drum. Particles of two dif- ferent sizes were poured into the drum until it was 50% full. Shear-driven segregation was induced by rotating the side-plates of the drum in the opposite direction to that of the cylindrical wall. We found that radial segregation diminished in these systems but did not completely vanish. In an ordinary rotating drum, a radial core of smaller particles is formed in the center of the drum, surrounded by larger revolving particles. In our system, however, the smaller particles were found to migrate toward the side-plates. The shear from anti-spinning side-plates reduces the voidage and increases the bulk density. As such, smaller particles in the mixer tend to move to denser regions. We varied the shear by changing the coefficient of friction on the side-plates to study the influence of shear rate on this migration. We also compared the extent of radial segregation with stationary side-plates and with side-plates moving in different angular directions.展开更多
A model is presented of particle advection near groynes in an open channel. Open channel hydrodynamics is modelled using the shallow water equations, obtained as the depth-averaged form of Reynolds-averaged continuity...A model is presented of particle advection near groynes in an open channel. Open channel hydrodynamics is modelled using the shallow water equations, obtained as the depth-averaged form of Reynolds-averaged continuity and Navier-Stokes momentum equations. A Lagrangian particle-tracking model is used to predict trajectories of tracer particles advected by the flow field, with bilinear interpolation representing the continuous flow field. The particle-tracking model is verified for chaotic advection in an alternating flow field of a pair of blinking vortices. The combined shallow flow and Lagrangian particle-tracking model is applied to the simulation of tracer advection in flow past a pair of side-wall cavities separated by a groyne, and in an open rectangular channel containing a pair of parallel groynes oriented normal to the channel wall. The study is potentially useful in understanding mixing processes in shallow flow fields near hydraulic structures in wide rivers.展开更多
A ducted Darrieus-type turbine has been proposed for hydropower utilization of extra-low head less than 2 m.Though the hydro turbine system,in general,might consist of an intake,runner casing section and a draft tube ...A ducted Darrieus-type turbine has been proposed for hydropower utilization of extra-low head less than 2 m.Though the hydro turbine system,in general,might consist of an intake,runner casing section and a draft tube for higher efficiency operation,it was clarified in previous experiment that there was no need of the side-walls of runner casing section and a draft-tube for keeping the efficiency high in the case of duct with an inlet nozzle.This would yield a simplification of the structure of the turbine system.In order to reconfirm this result for large-sized turbine with 560 mm×300 mm duct,instead of small-sized one with 400 mm×200 mm duct,the side-wall effect on turbine performance was experimentally investigated for three-or four-bladed runner.In the present paper,the experimental results are shown with considering flow behaviors in the runner section.展开更多
Although the solid-state lighting market is growing rapidly, it is still difficult to obtain ultra-high brightness white light emitting diodes(LEDs). V-pits are inevitably introduced during the metalorganic chemical v...Although the solid-state lighting market is growing rapidly, it is still difficult to obtain ultra-high brightness white light emitting diodes(LEDs). V-pits are inevitably introduced during the metalorganic chemical vapor deposition(MOCVD)growth of multiple quantum wells(MQWs) in Ⅲ–nitride LEDs, and thus affecting the carrier dynamics of the LEDs.Specifically designed structures are fabricated to study the influence of the V-pits on the hole transportation and efficiency droop, and double quantum wells(QWs) are used to monitor the transportation and distribution of holes based on their emission intensity. It is found that when compared with the planar QWs, the injection of holes into the QWs through the side walls of the V-pits changes the distribution of holes among the MQWs. This results in a higher probability of hole injection into the middle QWs and enhanced emission therein, and, consequently, a lower efficiency droop.展开更多
文摘Segregation and mixing of granular materials are complex processes and are not fully understood. Motivated by industrial need, we performed a simulation using the discrete element method to study size segregation of a binary mixture of granular particles in a horizontal rotating drum. Particles of two dif- ferent sizes were poured into the drum until it was 50% full. Shear-driven segregation was induced by rotating the side-plates of the drum in the opposite direction to that of the cylindrical wall. We found that radial segregation diminished in these systems but did not completely vanish. In an ordinary rotating drum, a radial core of smaller particles is formed in the center of the drum, surrounded by larger revolving particles. In our system, however, the smaller particles were found to migrate toward the side-plates. The shear from anti-spinning side-plates reduces the voidage and increases the bulk density. As such, smaller particles in the mixer tend to move to denser regions. We varied the shear by changing the coefficient of friction on the side-plates to study the influence of shear rate on this migration. We also compared the extent of radial segregation with stationary side-plates and with side-plates moving in different angular directions.
基金University of Edinburgh which partly funded this research
文摘A model is presented of particle advection near groynes in an open channel. Open channel hydrodynamics is modelled using the shallow water equations, obtained as the depth-averaged form of Reynolds-averaged continuity and Navier-Stokes momentum equations. A Lagrangian particle-tracking model is used to predict trajectories of tracer particles advected by the flow field, with bilinear interpolation representing the continuous flow field. The particle-tracking model is verified for chaotic advection in an alternating flow field of a pair of blinking vortices. The combined shallow flow and Lagrangian particle-tracking model is applied to the simulation of tracer advection in flow past a pair of side-wall cavities separated by a groyne, and in an open rectangular channel containing a pair of parallel groynes oriented normal to the channel wall. The study is potentially useful in understanding mixing processes in shallow flow fields near hydraulic structures in wide rivers.
文摘A ducted Darrieus-type turbine has been proposed for hydropower utilization of extra-low head less than 2 m.Though the hydro turbine system,in general,might consist of an intake,runner casing section and a draft tube for higher efficiency operation,it was clarified in previous experiment that there was no need of the side-walls of runner casing section and a draft-tube for keeping the efficiency high in the case of duct with an inlet nozzle.This would yield a simplification of the structure of the turbine system.In order to reconfirm this result for large-sized turbine with 560 mm×300 mm duct,instead of small-sized one with 400 mm×200 mm duct,the side-wall effect on turbine performance was experimentally investigated for three-or four-bladed runner.In the present paper,the experimental results are shown with considering flow behaviors in the runner section.
基金Project supported by the National Key Research and Development Project of China(Grant No.2017YFB0403303)the Key Technologies Research and Development Program of Tianjin,China(Grant Nos.18YFZCGX00760 and 18YFZCGX00400)
文摘Although the solid-state lighting market is growing rapidly, it is still difficult to obtain ultra-high brightness white light emitting diodes(LEDs). V-pits are inevitably introduced during the metalorganic chemical vapor deposition(MOCVD)growth of multiple quantum wells(MQWs) in Ⅲ–nitride LEDs, and thus affecting the carrier dynamics of the LEDs.Specifically designed structures are fabricated to study the influence of the V-pits on the hole transportation and efficiency droop, and double quantum wells(QWs) are used to monitor the transportation and distribution of holes based on their emission intensity. It is found that when compared with the planar QWs, the injection of holes into the QWs through the side walls of the V-pits changes the distribution of holes among the MQWs. This results in a higher probability of hole injection into the middle QWs and enhanced emission therein, and, consequently, a lower efficiency droop.
