This study is the result of long-term efforts of the authors’team to assess ground response of gob-side entry by roof cutting(GSERC)with hard main roof,aiming at scientific control for GSERC deformation.A comprehensi...This study is the result of long-term efforts of the authors’team to assess ground response of gob-side entry by roof cutting(GSERC)with hard main roof,aiming at scientific control for GSERC deformation.A comprehensive field measurement program was conducted to determine entry deformation,roof fracture zone,and anchor bolt(cable)loading.The results indicate that GSERC deformation presents asymmetric characteristics.The maximum convergence near roof cutting side is 458 mm during the primary use process and 1120 mm during the secondary reuse process.The entry deformation is closely associated with the primary development stage,primary use stage,and secondary reuse stage.The key block movement of roof cutting structure,a complex stress environment,and a mismatch in the supporting design scheme are the failure mechanism of GSERC.A controlling ideology for mining states,including regional and stage divisions,was proposed.Both dynamic and permanent support schemes have been implemented in the field.Engineering practice results indicate that the new support scheme can efficiently ensure long-term entry safety and could be a reliable approach for other engineering practices.展开更多
In order to study the mechanism of the dual side roof cutting technology on the composite disaster of gas and coal spontaneous combustion in goaf,a model for the evolution of porosity and permeability in the dual side...In order to study the mechanism of the dual side roof cutting technology on the composite disaster of gas and coal spontaneous combustion in goaf,a model for the evolution of porosity and permeability in the dual side roof cutting working face was constructed.The location of the occurrence of the compound disaster of gas explosion and coal spontaneous combustion under the double-sided roof cutting mode was studied,and the sensitivity of the evolution pattern of the compound disaster area to the amount of air supply and gas gush was summarized.The results indicate that the top cutting pressure relief technology significantly reduces the permeability of porous media,and the sensitivity of the goaf on the intake side to airflow disturbances is significantly reduced.As the volume of air supply increases,the distance between the gas explosion risk area and the coal spontaneous combustion risk area gradually decreases,and the probability of composite disaster areas is 0.The increase of air supply and gas emission makes the gas concentration in the middle and deep goaf increase in an exponential function,and the width of the gas explosion risk area increases gradually.When the outflow reaches 40 m^(3)/min,there is no composite disaster zone,indicating that the rapid increase in outflow inhibits the occurrence of composite disasters.展开更多
A novel pneumatic recovery method was proposed to curb the problem of high losses caused by side-cutting in a rapeseed combine harvester header.The influence of recovery method and material status changes on the recov...A novel pneumatic recovery method was proposed to curb the problem of high losses caused by side-cutting in a rapeseed combine harvester header.The influence of recovery method and material status changes on the recovery effect was studied via the CFD-DEM(computational fluid dynamic-discrete element method)coupling simulation.The effect of airflow action on the recovery effect was compared and analyzed,and the composite pneumatic recovery method was determined.In addition,the influence of material status changes and material feeding rate on the recovery effect was explored,and the critical condition of material blockage in the recovery device was configured.As such,the relationship model between air velocity and recovery rate was constructed and the air distribution ratio of the flow field in the device under this condition was optimized,had verified the rationality of this pneumatic recovery method was verified by a series of field tests.The average rapeseed recovery rate of 92.95%was achieved with the application of the recovery device,and the total loss rate of the header reduced by 52.26%,which is of great significance in reducing the total loss rate of the combine harvesters and improving the operation performance of machinery.The research results can provide a reference for the design of the header structure of a rape combine harvester.展开更多
The hole reaming and side cutting characteristics of offset one-cone bit and conventional one- cone bit were investigated on simulated drilling experimental equipment. The borehole diameter was a little larger than th...The hole reaming and side cutting characteristics of offset one-cone bit and conventional one- cone bit were investigated on simulated drilling experimental equipment. The borehole diameter was a little larger than the bit diameter due to side force. However, the reaming effect was not very apparent, whether drilling with an offset or conventional one-cone bit. The side cutting displacement increased gradually with increasing depth of drilling and side force. The side cutting displacement of offset onecone bits was larger than that of conventional ones under the same conditions of weight-on-bit （WOB）, rotary speed, side force and borehole depth.展开更多
基金Project(WPUKFJJ2019-19)supported by the Open Fund of State Key Laboratory of Water Resource Protection and Utilization in Coal Mining,ChinaProject(51974317)supported by the National Natural Science Foundation of China。
文摘This study is the result of long-term efforts of the authors’team to assess ground response of gob-side entry by roof cutting(GSERC)with hard main roof,aiming at scientific control for GSERC deformation.A comprehensive field measurement program was conducted to determine entry deformation,roof fracture zone,and anchor bolt(cable)loading.The results indicate that GSERC deformation presents asymmetric characteristics.The maximum convergence near roof cutting side is 458 mm during the primary use process and 1120 mm during the secondary reuse process.The entry deformation is closely associated with the primary development stage,primary use stage,and secondary reuse stage.The key block movement of roof cutting structure,a complex stress environment,and a mismatch in the supporting design scheme are the failure mechanism of GSERC.A controlling ideology for mining states,including regional and stage divisions,was proposed.Both dynamic and permanent support schemes have been implemented in the field.Engineering practice results indicate that the new support scheme can efficiently ensure long-term entry safety and could be a reliable approach for other engineering practices.
基金supported by the National Natural Science Foundation of China(No.52204090).
文摘In order to study the mechanism of the dual side roof cutting technology on the composite disaster of gas and coal spontaneous combustion in goaf,a model for the evolution of porosity and permeability in the dual side roof cutting working face was constructed.The location of the occurrence of the compound disaster of gas explosion and coal spontaneous combustion under the double-sided roof cutting mode was studied,and the sensitivity of the evolution pattern of the compound disaster area to the amount of air supply and gas gush was summarized.The results indicate that the top cutting pressure relief technology significantly reduces the permeability of porous media,and the sensitivity of the goaf on the intake side to airflow disturbances is significantly reduced.As the volume of air supply increases,the distance between the gas explosion risk area and the coal spontaneous combustion risk area gradually decreases,and the probability of composite disaster areas is 0.The increase of air supply and gas emission makes the gas concentration in the middle and deep goaf increase in an exponential function,and the width of the gas explosion risk area increases gradually.When the outflow reaches 40 m^(3)/min,there is no composite disaster zone,indicating that the rapid increase in outflow inhibits the occurrence of composite disasters.
基金This work was supported by the Key Research Program&Technology Innovation Program of Chinese Academy of Agricultural Sciences(CAAS-ZDRW202105)China Agriculture Research System of MOF and MARA(CARS-12)+1 种基金Synergistic Innovation Center of Jiangsu Modern Agricultural Equipment and Technology(4091600002)Central Public-interest Scientific Institution Basal Research Fund for Chinese Academy of Tropical Agricultural Sciences(S202102-02).
文摘A novel pneumatic recovery method was proposed to curb the problem of high losses caused by side-cutting in a rapeseed combine harvester header.The influence of recovery method and material status changes on the recovery effect was studied via the CFD-DEM(computational fluid dynamic-discrete element method)coupling simulation.The effect of airflow action on the recovery effect was compared and analyzed,and the composite pneumatic recovery method was determined.In addition,the influence of material status changes and material feeding rate on the recovery effect was explored,and the critical condition of material blockage in the recovery device was configured.As such,the relationship model between air velocity and recovery rate was constructed and the air distribution ratio of the flow field in the device under this condition was optimized,had verified the rationality of this pneumatic recovery method was verified by a series of field tests.The average rapeseed recovery rate of 92.95%was achieved with the application of the recovery device,and the total loss rate of the header reduced by 52.26%,which is of great significance in reducing the total loss rate of the combine harvesters and improving the operation performance of machinery.The research results can provide a reference for the design of the header structure of a rape combine harvester.
文摘The hole reaming and side cutting characteristics of offset one-cone bit and conventional one- cone bit were investigated on simulated drilling experimental equipment. The borehole diameter was a little larger than the bit diameter due to side force. However, the reaming effect was not very apparent, whether drilling with an offset or conventional one-cone bit. The side cutting displacement increased gradually with increasing depth of drilling and side force. The side cutting displacement of offset onecone bits was larger than that of conventional ones under the same conditions of weight-on-bit （WOB）, rotary speed, side force and borehole depth.
