In this work,we put forward a scheme to exquisitely design and selectively synthesize the core@shell structured MSe_(2)/FeSe_(2)@MoSe_(2)(M=Co,Ni)flower-like multicomponent nanocomposites(MCNCs)through a simple two-st...In this work,we put forward a scheme to exquisitely design and selectively synthesize the core@shell structured MSe_(2)/FeSe_(2)@MoSe_(2)(M=Co,Ni)flower-like multicomponent nanocomposites(MCNCs)through a simple two-step hydrothermal reaction on the surfaces of MFe_(2)O_4 nanospheres with the certain amounts of Mo and Se sources.With increasing the amounts of Mo and Se sources,the obtained core@shell structured MSe_(2)/FeSe_(2)@MoSe_(2)(M=Co,Ni)MCNCs with the enhanced content of MoSe_(2)and improved flower-like geometry morphology could be produced on a large scale.The obtained results revealed that the as-prepared samples displayed improved comprehensive microwave absorption properties(CMAPs)with the increased amounts of Mo and Se sources.The as-prepared CoSe_(2)/FeSe_(2)@MoSe_(2)and NiSe_(2)/FeSe_(2)@MoSe_(2)MCNCs with the well-defined flower-like morphology could simultaneously present the outstanding CMAPs in terms of strong absorption capability,wide absorption bandwidth,and thin matching thicknesses,which mainly originated from the conduction loss and flower-like geometry morphology.Therefore,the findings not only develop the very desirable candidates for high-performance microwave absorption materials but also pave a new way for optimizing the CMAPs through tailoring morphology engineering.展开更多
The nano era demands the synthesis of new nanostructured materials,if possible by simplified techniques,with remarkable properties and versatile applications.Here,we demonstrate a new single-step reproducible melt-que...The nano era demands the synthesis of new nanostructured materials,if possible by simplified techniques,with remarkable properties and versatile applications.Here,we demonstrate a new single-step reproducible melt-quench methodology to fabricate core-shell bimetallic(Au0 Ag0)nanoparticles(2889 nm)embedded glasses(dielectrics)by the use of a new reducing glass matrix,K_(2)O B_(2)O_(3) Sb_(2)O_(3)(KBS)without applying any external reducing agent or multiple processing steps.The surface plasmon resonance(SPR)band of these nanocomposites embedded in KBS glass is tunable in the range 554-681 nm.More remarkably,taking advantage of the selective reduction capability of Sb_(2)O_(3),this single-step methodology is used to fabricate inter-metallic:rare-earth ions co-embedded(AuAg:Sm^(3+))dielectric(glass)-based-dnanocomposites and study the effect of enhanced local fi eld on the red upconversion fl uorescence of Sm^(3+)ions at 636 nm.The enhancement is found to be about 2 folds.This single-step in-situ selective reduction approach can be used to fabricate a variety of hybrid-nanocomposite devices for laser based applications(see supplementary information).展开更多
We reported an approach to reconstruct the complex phase morphology of impact polypropylene copolymer （IPC） with core-shell dispersed particles and to optimize its toughness in approximate shear condition. The molte...We reported an approach to reconstruct the complex phase morphology of impact polypropylene copolymer （IPC） with core-shell dispersed particles and to optimize its toughness in approximate shear condition. The molten-state annealing results indicate that the phase structure with core-shell dispersed particles is unstable and could be completely destroyed by static annealing, resulting in the degradation of impact strength. By using a co-rotating twin screw extruder, we found that the dispersed particle with core-shell structure could be rebuilt in appropriate condition with the recovery of excellent impact strength due to both the huge interfacial tension during solidification and the great difference in viscosity of components. Results reveal that almost all the extruded IPCs show the impact strength 60%-90% higher than that of annealed IPCs at room temperature. And the twice-extruded IPC shows the highest impact strength, 446% higher than that of IPC annealed for 30 min. As for low temperature tests, the impact strength of extruded IPCs also increases by 33%-58%. According to adjusting the processing conditions including extrusion speed, extrusion frequency and temperature, an optimization of toughness was well established.展开更多
Chitin is the second most abundant polysaccharide,produced mainly as an industrial waste stream during crustacean processing.Chitin can be derived into chitosan through the deacetylation process.Conversion of shrimp w...Chitin is the second most abundant polysaccharide,produced mainly as an industrial waste stream during crustacean processing.Chitin can be derived into chitosan through the deacetylation process.Conversion of shrimp waste into chitosan via the deacetylation process could be considered a practical approach for shell waste remediation.In this study,chitosan’s physicochemical characteristics extracted from two types of Pacific white leg shrimp,L.vannamei’s shell(i.e.,rough and smooth),were compared with commercial chitosan.The yield,moisture,ash,solubility,water and fat binding capacity were measured.The degree of deacetylation(DDA)was calculated using FTIR,and their chemical Structure was confirmed using XRD and SEM-EDS.Both extracted chitosan showed no significant difference in yield,moisture,ash,solubility and water binding capacity but showed a significant difference with commercial chitosan.Moreover,the fat binding capacity of commercial chitosan showed the lowest percentage(408.34±0.83%)as compared to extracted chitosan(smooth shell 549.59±12.48%;rough shell 500.55±12.10%).The DDA indicated that extracted chitosan from the smooth and rough shell was considered good chitosan as compared to commercial chitosan with 84.08±1.27%,80.78±0.79%and 74.99±1.48%,respectively.Additionally,the presence of hydroxyl and amino groups from FTIR and a good crystallinity index was recorded using XRD of extracted chitosan.Based on observed characteristics,shrimp shell waste from L.vannamei can achieve chitosan standard quality as a biopolymer and highly potential to be applied in various industrial applications.展开更多
Three-layer core/shell latex particles with various shell crosslinking level and shell thickness were prepared by multistep emulsion polymerization, and the hollow latex particles with different morphologies were then...Three-layer core/shell latex particles with various shell crosslinking level and shell thickness were prepared by multistep emulsion polymerization, and the hollow latex particles with different morphologies were then obtained after alkali post-treatment. Influences of divinyl benzene （DVB） content and the core/shell mass ratio on emulsion polymerization and particle morphology were investigated. Results showed that with the increase of DVB content, the percentage of total amount of --COOH on the particle surface and free in aqueous phase （PSFa） decreased, and the morphology of the post-treated particles underwent evolution from cracked, intact hollow to deficient swelling structure. Decreasing the core/shell mass ratio could not only make more carboxyl groups encapsulated by the shell, but also increase the shell resistance to the swelling of the core. The uniform hollow latex particles with intact morphology were obtained when the DVB content was 3.54 wt% and the core/shell mass ratio was 1/6.展开更多
基金financially supported by the Fund of Fok Ying Tung Education Foundationthe Major Research Project of innovative Group of Guizhou province(2018–013)+2 种基金the Open Fund from Henan University of Science and Technologythe National Science Foundation of China(Nos.11964006 and 11774156)the Foundation of the National Key Project for Basic Research(No.2012CB932304)。
文摘In this work,we put forward a scheme to exquisitely design and selectively synthesize the core@shell structured MSe_(2)/FeSe_(2)@MoSe_(2)(M=Co,Ni)flower-like multicomponent nanocomposites(MCNCs)through a simple two-step hydrothermal reaction on the surfaces of MFe_(2)O_4 nanospheres with the certain amounts of Mo and Se sources.With increasing the amounts of Mo and Se sources,the obtained core@shell structured MSe_(2)/FeSe_(2)@MoSe_(2)(M=Co,Ni)MCNCs with the enhanced content of MoSe_(2)and improved flower-like geometry morphology could be produced on a large scale.The obtained results revealed that the as-prepared samples displayed improved comprehensive microwave absorption properties(CMAPs)with the increased amounts of Mo and Se sources.The as-prepared CoSe_(2)/FeSe_(2)@MoSe_(2)and NiSe_(2)/FeSe_(2)@MoSe_(2)MCNCs with the well-defined flower-like morphology could simultaneously present the outstanding CMAPs in terms of strong absorption capability,wide absorption bandwidth,and thin matching thicknesses,which mainly originated from the conduction loss and flower-like geometry morphology.Therefore,the findings not only develop the very desirable candidates for high-performance microwave absorption materials but also pave a new way for optimizing the CMAPs through tailoring morphology engineering.
基金the Council of Scientific and Industrial Research(CSIR),New Delhi in the form of NET-SRF under sanction number 31/015(0060)/2007-EMR-1。
文摘The nano era demands the synthesis of new nanostructured materials,if possible by simplified techniques,with remarkable properties and versatile applications.Here,we demonstrate a new single-step reproducible melt-quench methodology to fabricate core-shell bimetallic(Au0 Ag0)nanoparticles(2889 nm)embedded glasses(dielectrics)by the use of a new reducing glass matrix,K_(2)O B_(2)O_(3) Sb_(2)O_(3)(KBS)without applying any external reducing agent or multiple processing steps.The surface plasmon resonance(SPR)band of these nanocomposites embedded in KBS glass is tunable in the range 554-681 nm.More remarkably,taking advantage of the selective reduction capability of Sb_(2)O_(3),this single-step methodology is used to fabricate inter-metallic:rare-earth ions co-embedded(AuAg:Sm^(3+))dielectric(glass)-based-dnanocomposites and study the effect of enhanced local fi eld on the red upconversion fl uorescence of Sm^(3+)ions at 636 nm.The enhancement is found to be about 2 folds.This single-step in-situ selective reduction approach can be used to fabricate a variety of hybrid-nanocomposite devices for laser based applications(see supplementary information).
基金financially supported by the National Natural Science Foundation of China(Nos.51173157 and 51173165)the Fundamental Research Funds for the Central Universities(No.2013QNA4048)
文摘We reported an approach to reconstruct the complex phase morphology of impact polypropylene copolymer （IPC） with core-shell dispersed particles and to optimize its toughness in approximate shear condition. The molten-state annealing results indicate that the phase structure with core-shell dispersed particles is unstable and could be completely destroyed by static annealing, resulting in the degradation of impact strength. By using a co-rotating twin screw extruder, we found that the dispersed particle with core-shell structure could be rebuilt in appropriate condition with the recovery of excellent impact strength due to both the huge interfacial tension during solidification and the great difference in viscosity of components. Results reveal that almost all the extruded IPCs show the impact strength 60%-90% higher than that of annealed IPCs at room temperature. And the twice-extruded IPC shows the highest impact strength, 446% higher than that of IPC annealed for 30 min. As for low temperature tests, the impact strength of extruded IPCs also increases by 33%-58%. According to adjusting the processing conditions including extrusion speed, extrusion frequency and temperature, an optimization of toughness was well established.
基金funded by The Ministry of Higher Education(MOHE)Malaysia,under The Higher Institution Centre of Excellence(HICoE)Institute of Tropical Aquaculture and Fisheries(AKUATROP)Program[Vot.No.63933,JPT.S(BPKI)2000/016/018/015 Jld.3(23)and Vot.No.56050,UMT/PPPI/2-2/5 Jld.2(24)].This work was also funded by the Long-Term Research Grant Scheme 1/2018,LRGS(LRGS/2018/USM-UKM/EWS/01).
文摘Chitin is the second most abundant polysaccharide,produced mainly as an industrial waste stream during crustacean processing.Chitin can be derived into chitosan through the deacetylation process.Conversion of shrimp waste into chitosan via the deacetylation process could be considered a practical approach for shell waste remediation.In this study,chitosan’s physicochemical characteristics extracted from two types of Pacific white leg shrimp,L.vannamei’s shell(i.e.,rough and smooth),were compared with commercial chitosan.The yield,moisture,ash,solubility,water and fat binding capacity were measured.The degree of deacetylation(DDA)was calculated using FTIR,and their chemical Structure was confirmed using XRD and SEM-EDS.Both extracted chitosan showed no significant difference in yield,moisture,ash,solubility and water binding capacity but showed a significant difference with commercial chitosan.Moreover,the fat binding capacity of commercial chitosan showed the lowest percentage(408.34±0.83%)as compared to extracted chitosan(smooth shell 549.59±12.48%;rough shell 500.55±12.10%).The DDA indicated that extracted chitosan from the smooth and rough shell was considered good chitosan as compared to commercial chitosan with 84.08±1.27%,80.78±0.79%and 74.99±1.48%,respectively.Additionally,the presence of hydroxyl and amino groups from FTIR and a good crystallinity index was recorded using XRD of extracted chitosan.Based on observed characteristics,shrimp shell waste from L.vannamei can achieve chitosan standard quality as a biopolymer and highly potential to be applied in various industrial applications.
文摘Three-layer core/shell latex particles with various shell crosslinking level and shell thickness were prepared by multistep emulsion polymerization, and the hollow latex particles with different morphologies were then obtained after alkali post-treatment. Influences of divinyl benzene （DVB） content and the core/shell mass ratio on emulsion polymerization and particle morphology were investigated. Results showed that with the increase of DVB content, the percentage of total amount of --COOH on the particle surface and free in aqueous phase （PSFa） decreased, and the morphology of the post-treated particles underwent evolution from cracked, intact hollow to deficient swelling structure. Decreasing the core/shell mass ratio could not only make more carboxyl groups encapsulated by the shell, but also increase the shell resistance to the swelling of the core. The uniform hollow latex particles with intact morphology were obtained when the DVB content was 3.54 wt% and the core/shell mass ratio was 1/6.
