The pneumatic precision seed-metering devices used in combination with negative air pressure to suck seed and positive air flow to drop seed could overcome the problem of rapeseed precision planting.However,these devi...The pneumatic precision seed-metering devices used in combination with negative air pressure to suck seed and positive air flow to drop seed could overcome the problem of rapeseed precision planting.However,these devices can only plant a single row at a time or need high airflow pressure,which complicates the seed-metering system and the seeder structure,deteriorate the working reliability and have high power consumption.To overcome above shortcomings,a novel prototype of pneumatic precision centralized seed-metering device with seed inside-filling,sowing six rows at a time,was developed.The main structure and working principle of the prototype were described and the technical parameters were given.Experiments were conducted to investigate the influences of positive pressure,negative pressure,and rotating speed on the seeding performance.The stability of each row and the consistency between all rows associated with the seeding precision were analyzed to evaluate the performance of the prototype.The results indicated that the prototype can meet the requirements of precision seeding and the seed keep intact without any obvious damage.The performance of the prototype was no significant difference when the positive pressure was fluctuated from 200 Pa to 1200 Pa.The best seeding precision parameters in one row of the prototype was 92.48%of the qualified seeding index(Iqs)and 2.55%of the miss-seeding index(Imiss),when the rotating speed was 16 r/min,the positive pressure was 200 Pa and the negative pressure was–1600 Pa.When the rotating speed was 16 r/min,the positive pressure was 200 Pa,and the negative pressure was–1400 Pa or–1600 Pa,the Iqs of six rows were above 86.5%,the stability coefficient of variation(CV)of each row were below 4.6%,and the consistency CV were below 0.9%.Further field experiment showed that the rapeseed sowed by the prototype had acceptable seeding precision.The CV of the numbers of rapeseed seedlings in the field of the total and each row were 6.17%and 6.32%respectively.The research conf展开更多
Since the low seed filling speed of mechanical seed metering devices reduces the low qualified rate of seed spacing during high-speed practices,it is significant to design agitated seed metering devices with horizonta...Since the low seed filling speed of mechanical seed metering devices reduces the low qualified rate of seed spacing during high-speed practices,it is significant to design agitated seed metering devices with horizontal seed filling that are suitable for high-speed practices.The combination of horizontal seed filling and agitated seed filling can accelerate the seed filling of mechanical seed metering devices,and improve the qualified rate of seed spacing during high-speed practices.In this study,theoretical analysis,discrete element method-based simulation and indoor bench test verification were conducted to investigate how key parameters of the agitated seed metering device with horizontal seed filling(angles,installation position and number of agitating plates,diameters of convex spoons)would affect the characteristics of soybean seed movement,seed number and seeding performance(qualified index,multiple index,missing seeding index)under different working speeds.Computer-based simulation,test design and regression analysis were combined to analyze the population moving rules and optimize the design parameters of seed metering devices.Based on the test scheme as designed,simulations were conducted on Fluent EDEM,and the optimal angle of the agitating plates was determined by analyzing the population migrating rules.Regression equations were established through the regression of test results,and used to find out the optimal design parameters(diameter of convex spoon,positions and number of agitating plates)of seed metering devices.Then the optimal parameter combination among different working conditions was determined that the angle,position and number of agitating plates were 30°,24.4 mm,and 13,respectively,and the diameter of convex spoon was 11.0 mm.With the optimal parameter combination and at the seeding speed of 12 km/h,the qualified index,multiple index and missing seeding index were 93.1%,2.1%and 4.8%,respectively.Under high-speed practices,the new seed metering device was not significantly different from展开更多
In this work,we show for the first time that high-silica zeolites(MFI,TON,MTT,and*MRE)could be synthesized from a combined strategy of both zeolite seeding and alcohol filling in the absence of organic structure-direc...In this work,we show for the first time that high-silica zeolites(MFI,TON,MTT,and*MRE)could be synthesized from a combined strategy of both zeolite seeding and alcohol filling in the absence of organic structure-directing agents(OSDAs).High-silica ZSM-5 zeolites with Si/Al ratios ranging from 38 to 240(TF-Al-ZSM-5)could be synthesized via this route.The key to the success of this technique was the employment of an aluminosilicate precursor with a fully 4-coordinated aluminum species as the initial source,wherein the rearrangement and condensation of the silicate species,rather than the aluminate species,occurred during zeolite crystallization.In addition,heteroatoms,such as Fe and B,could be incorporated into the zeolite frameworks.Catalytic tests for the methanol-to-propylene(MTP)reaction exhibited good catalytic performance for TF-Al-ZSM-5,which was comparable to that of the aluminosilicate ZSM-5 zeolite synthesized with OSDAs.Hence,this method offers viable opportunities for the industrial production and catalytic application of high-silica zeolites in the future.展开更多
基金the National Natural Science Foundation of China(5140518)Modern Agro-industry Technology Research Systems(CARS-13)Scientific Research Outstanding Talent and Innovation Team Foundation of Ministry of Agriculture of China,and the Key Project of Hubei Province(2014070504020240).
文摘The pneumatic precision seed-metering devices used in combination with negative air pressure to suck seed and positive air flow to drop seed could overcome the problem of rapeseed precision planting.However,these devices can only plant a single row at a time or need high airflow pressure,which complicates the seed-metering system and the seeder structure,deteriorate the working reliability and have high power consumption.To overcome above shortcomings,a novel prototype of pneumatic precision centralized seed-metering device with seed inside-filling,sowing six rows at a time,was developed.The main structure and working principle of the prototype were described and the technical parameters were given.Experiments were conducted to investigate the influences of positive pressure,negative pressure,and rotating speed on the seeding performance.The stability of each row and the consistency between all rows associated with the seeding precision were analyzed to evaluate the performance of the prototype.The results indicated that the prototype can meet the requirements of precision seeding and the seed keep intact without any obvious damage.The performance of the prototype was no significant difference when the positive pressure was fluctuated from 200 Pa to 1200 Pa.The best seeding precision parameters in one row of the prototype was 92.48%of the qualified seeding index(Iqs)and 2.55%of the miss-seeding index(Imiss),when the rotating speed was 16 r/min,the positive pressure was 200 Pa and the negative pressure was–1600 Pa.When the rotating speed was 16 r/min,the positive pressure was 200 Pa,and the negative pressure was–1400 Pa or–1600 Pa,the Iqs of six rows were above 86.5%,the stability coefficient of variation(CV)of each row were below 4.6%,and the consistency CV were below 0.9%.Further field experiment showed that the rapeseed sowed by the prototype had acceptable seeding precision.The CV of the numbers of rapeseed seedlings in the field of the total and each row were 6.17%and 6.32%respectively.The research conf
基金supported by the 13th Five-Year Plan for National Science and Technology(Grant No.2016YFD0700302)National Natural Science Foundation of China(51705194)(JJKH20170811KJ).
文摘Since the low seed filling speed of mechanical seed metering devices reduces the low qualified rate of seed spacing during high-speed practices,it is significant to design agitated seed metering devices with horizontal seed filling that are suitable for high-speed practices.The combination of horizontal seed filling and agitated seed filling can accelerate the seed filling of mechanical seed metering devices,and improve the qualified rate of seed spacing during high-speed practices.In this study,theoretical analysis,discrete element method-based simulation and indoor bench test verification were conducted to investigate how key parameters of the agitated seed metering device with horizontal seed filling(angles,installation position and number of agitating plates,diameters of convex spoons)would affect the characteristics of soybean seed movement,seed number and seeding performance(qualified index,multiple index,missing seeding index)under different working speeds.Computer-based simulation,test design and regression analysis were combined to analyze the population moving rules and optimize the design parameters of seed metering devices.Based on the test scheme as designed,simulations were conducted on Fluent EDEM,and the optimal angle of the agitating plates was determined by analyzing the population migrating rules.Regression equations were established through the regression of test results,and used to find out the optimal design parameters(diameter of convex spoon,positions and number of agitating plates)of seed metering devices.Then the optimal parameter combination among different working conditions was determined that the angle,position and number of agitating plates were 30°,24.4 mm,and 13,respectively,and the diameter of convex spoon was 11.0 mm.With the optimal parameter combination and at the seeding speed of 12 km/h,the qualified index,multiple index and missing seeding index were 93.1%,2.1%and 4.8%,respectively.Under high-speed practices,the new seed metering device was not significantly different from
文摘In this work,we show for the first time that high-silica zeolites(MFI,TON,MTT,and*MRE)could be synthesized from a combined strategy of both zeolite seeding and alcohol filling in the absence of organic structure-directing agents(OSDAs).High-silica ZSM-5 zeolites with Si/Al ratios ranging from 38 to 240(TF-Al-ZSM-5)could be synthesized via this route.The key to the success of this technique was the employment of an aluminosilicate precursor with a fully 4-coordinated aluminum species as the initial source,wherein the rearrangement and condensation of the silicate species,rather than the aluminate species,occurred during zeolite crystallization.In addition,heteroatoms,such as Fe and B,could be incorporated into the zeolite frameworks.Catalytic tests for the methanol-to-propylene(MTP)reaction exhibited good catalytic performance for TF-Al-ZSM-5,which was comparable to that of the aluminosilicate ZSM-5 zeolite synthesized with OSDAs.Hence,this method offers viable opportunities for the industrial production and catalytic application of high-silica zeolites in the future.
