The multi-roller straightening process of section steel is analyzed by the springback theory of small curva- ture plane bending. The theoretical analysis results prove the curvature unification in straightening proces...The multi-roller straightening process of section steel is analyzed by the springback theory of small curva- ture plane bending. The theoretical analysis results prove the curvature unification in straightening process and clear- ly reveal the principle of the multi-roller straightening process. The principle can be described as~ the initial curva- tures are reduced by several times anti-bendingl meanwhile the initial curvature differences are diminished and the residual curvatures are unified~ finally, the member after curvature unification is straightened by the last anti-ben- ding. With the plastic region ratios becoming larger, the initial curvatures are more easily unified in straightening process. Based on the plastic region ratios and the required number of roller systems for unifying the initial curva- tures, the large deformation straightening strategy and the small deformation straightening strategy are redefined. The new definition provides an important theoretical basis for setting reliable reduction rules. Through the theoretical analysis results, a new straightener design philosophy is proposed to improve the straightening quality and further increase the adjustment precision as well as the flexibility of the last roller system. The adjustable end roller emerges as the times required, achieving a good effect in practical application.展开更多
In a round-oval-round pass rolling sequence, the cross-section profile of an outgoing workpiece was predicted first after getting the maximum spread. The concept ＂critical point on the contact boundary＂ was proposed...In a round-oval-round pass rolling sequence, the cross-section profile of an outgoing workpiece was predicted first after getting the maximum spread. The concept ＂critical point on the contact boundary＂ was proposed and the coordinates of the critical point were solved. The equivalent contact section area was represented and the mean roll radius was determined. The validity of this model was examined by alloy bar rolling experiment and rigid-plastic FEM simulation. Compared with the existing models, the mean roll radius obtained by this model is similar to experiment data.展开更多
In order to meet the demand of prehardened steel for large section plastic mould and save energy, a nonquenched prehardened （NQP） steel is developed. The temperature field of a large block is researched by finite el...In order to meet the demand of prehardened steel for large section plastic mould and save energy, a nonquenched prehardened （NQP） steel is developed. The temperature field of a large block is researched by finite element method simulation and 9 test steels are designed in the laboratory. Their microstructures and hardness are investigated when they are air cooled and control cooled at cooling rate similar to the simulation. The result shows that the hardness uniformity through section is closely correlated to bainitic hardenability for the NQP steel, and the hardness of one test steel （0.27C-1.95Mn-1.04Cr-0.45Mo-0.1V） fluctuates between HRC 40 and 43 under both cooling conditions. The test steel has better machinability compared with C45 steel, and the NQP steel is produced successfully in the factory based on the laboratory results. Its microstructure is bainite, and it is distributed uniformly through the size of 460 mm×800 mm×3 200 mm.展开更多
基金Item Sponsored by National Natural Science Foundation of China(51178452)
文摘The multi-roller straightening process of section steel is analyzed by the springback theory of small curva- ture plane bending. The theoretical analysis results prove the curvature unification in straightening process and clear- ly reveal the principle of the multi-roller straightening process. The principle can be described as~ the initial curva- tures are reduced by several times anti-bendingl meanwhile the initial curvature differences are diminished and the residual curvatures are unified~ finally, the member after curvature unification is straightened by the last anti-ben- ding. With the plastic region ratios becoming larger, the initial curvatures are more easily unified in straightening process. Based on the plastic region ratios and the required number of roller systems for unifying the initial curva- tures, the large deformation straightening strategy and the small deformation straightening strategy are redefined. The new definition provides an important theoretical basis for setting reliable reduction rules. Through the theoretical analysis results, a new straightener design philosophy is proposed to improve the straightening quality and further increase the adjustment precision as well as the flexibility of the last roller system. The adjustable end roller emerges as the times required, achieving a good effect in practical application.
文摘In a round-oval-round pass rolling sequence, the cross-section profile of an outgoing workpiece was predicted first after getting the maximum spread. The concept ＂critical point on the contact boundary＂ was proposed and the coordinates of the critical point were solved. The equivalent contact section area was represented and the mean roll radius was determined. The validity of this model was examined by alloy bar rolling experiment and rigid-plastic FEM simulation. Compared with the existing models, the mean roll radius obtained by this model is similar to experiment data.
基金Item Sponsored by Shanghai Leading Academic Discipline Project (T0101)
文摘In order to meet the demand of prehardened steel for large section plastic mould and save energy, a nonquenched prehardened （NQP） steel is developed. The temperature field of a large block is researched by finite element method simulation and 9 test steels are designed in the laboratory. Their microstructures and hardness are investigated when they are air cooled and control cooled at cooling rate similar to the simulation. The result shows that the hardness uniformity through section is closely correlated to bainitic hardenability for the NQP steel, and the hardness of one test steel （0.27C-1.95Mn-1.04Cr-0.45Mo-0.1V） fluctuates between HRC 40 and 43 under both cooling conditions. The test steel has better machinability compared with C45 steel, and the NQP steel is produced successfully in the factory based on the laboratory results. Its microstructure is bainite, and it is distributed uniformly through the size of 460 mm×800 mm×3 200 mm.
