The computer aided engineering analysis and design optimization of rotary tillage tool on the basis of finite element method and simulation method is done by using CAD-software for the structural analysis.The differen...The computer aided engineering analysis and design optimization of rotary tillage tool on the basis of finite element method and simulation method is done by using CAD-software for the structural analysis.The different tillage tool parts of rotary tillage tools are geometrically constructed as a solid model.The actual field performance rating parameters along with boundary conditions are set in the software for 35 hp and 45 hp tractor.The estimated forces acting on soil-tool interface are fed into software as a loading condition.The resultant effects of loading condition on tillage blade and whole rotavator assembly were obtained from stress distribution and deformations plots.The proposed working results in identifying sufficient tolerance in changing the dimensions of rotavator frame sections and side gear box for removing the excess weight in a solid section and also to raise the weight of blade for a reliable strength.The present working model with tillage blade is analysed to new design constraints with change of its geometry for the maximum weed removal efficiency by presenting its practical results from the field performance.展开更多
This experiment was conducted in silty clay loam soil and cultivated with previous season wheat. Tillage for experiment field was applied using moldboard plow with 0.22-0.24 m depth, the rate of tractor velocity was 2...This experiment was conducted in silty clay loam soil and cultivated with previous season wheat. Tillage for experiment field was applied using moldboard plow with 0.22-0.24 m depth, the rate of tractor velocity was 2.45 km hf^-1, as a tillage velocity. Two rates of tractor velocities （first factor） were applied： 3.24 km hr^-1, for the first velocity, and 4.71 km hr^-1 for the second, Three types of tillers （second factor） were used： disk harrow, rotavator tiller, and spring spike tooth harrow. The first velocity rate was： 2.51 km hr-l（with disk harrow as a machinery unit）, 2.92 km hr^-1 （with rotivator）, and 3.06 km hrl（with spring spike tooth harrow）, while the second velocity rate was： 3.19 km hr-1 （with disk harrow as a machinery unit）, 4.05 km hrl（with rotivator）, and 4.26 km hrl（with spring spike tooth harrow）. Split plot design in RCBD with three replicates was used at the constant of soil moisture 11%-13%. Results were analyzed statistically and means were tested with LSD. The results showed the significant differences between both two experiment factors and their interaction for all study parameters which included： slippage percentage, practical productivity, numbers of masses 〉 5 cm m^-2, and the implement width. At the constant of pulverization equipment types, the higher percentage of slippage was 16.45%, the higher rate of practical productivity was 0.677 h hr1, and the higher rate of implement width was 2.05 m, while the rate of masses 〉 5 cm m-2 decreased to 13.8 mass m2. At the constant of velocity, disk harrow achieved higher slippage percentage 17.69%, spring spike tooth harrow tiller achieved higher practical productivity 0.858 h hr^-1 and higher rate of implement width 2.73 m, and the rotivator achieved the lower rate of masses 〉 5 cm m2 and 4.1 mass m2. The comparison among the three pulverization equipment typess was the purpose of this study to give the best studied indexes under two different velocities.展开更多
文摘The computer aided engineering analysis and design optimization of rotary tillage tool on the basis of finite element method and simulation method is done by using CAD-software for the structural analysis.The different tillage tool parts of rotary tillage tools are geometrically constructed as a solid model.The actual field performance rating parameters along with boundary conditions are set in the software for 35 hp and 45 hp tractor.The estimated forces acting on soil-tool interface are fed into software as a loading condition.The resultant effects of loading condition on tillage blade and whole rotavator assembly were obtained from stress distribution and deformations plots.The proposed working results in identifying sufficient tolerance in changing the dimensions of rotavator frame sections and side gear box for removing the excess weight in a solid section and also to raise the weight of blade for a reliable strength.The present working model with tillage blade is analysed to new design constraints with change of its geometry for the maximum weed removal efficiency by presenting its practical results from the field performance.
文摘This experiment was conducted in silty clay loam soil and cultivated with previous season wheat. Tillage for experiment field was applied using moldboard plow with 0.22-0.24 m depth, the rate of tractor velocity was 2.45 km hf^-1, as a tillage velocity. Two rates of tractor velocities （first factor） were applied： 3.24 km hr^-1, for the first velocity, and 4.71 km hr^-1 for the second, Three types of tillers （second factor） were used： disk harrow, rotavator tiller, and spring spike tooth harrow. The first velocity rate was： 2.51 km hr-l（with disk harrow as a machinery unit）, 2.92 km hr^-1 （with rotivator）, and 3.06 km hrl（with spring spike tooth harrow）, while the second velocity rate was： 3.19 km hr-1 （with disk harrow as a machinery unit）, 4.05 km hrl（with rotivator）, and 4.26 km hrl（with spring spike tooth harrow）. Split plot design in RCBD with three replicates was used at the constant of soil moisture 11%-13%. Results were analyzed statistically and means were tested with LSD. The results showed the significant differences between both two experiment factors and their interaction for all study parameters which included： slippage percentage, practical productivity, numbers of masses 〉 5 cm m^-2, and the implement width. At the constant of pulverization equipment types, the higher percentage of slippage was 16.45%, the higher rate of practical productivity was 0.677 h hr1, and the higher rate of implement width was 2.05 m, while the rate of masses 〉 5 cm m-2 decreased to 13.8 mass m2. At the constant of velocity, disk harrow achieved higher slippage percentage 17.69%, spring spike tooth harrow tiller achieved higher practical productivity 0.858 h hr^-1 and higher rate of implement width 2.73 m, and the rotivator achieved the lower rate of masses 〉 5 cm m2 and 4.1 mass m2. The comparison among the three pulverization equipment typess was the purpose of this study to give the best studied indexes under two different velocities.
