To study the effect of the contact angle and helix angle on slide-roll ratio at the ball contact points under the accelerated motion state of ball screw mechanisrm(B S M),the curve theory in differential geometry a d ...To study the effect of the contact angle and helix angle on slide-roll ratio at the ball contact points under the accelerated motion state of ball screw mechanisrm(B S M),the curve theory in differential geometry a d the homogeneous transformation matrix ae used to establish the acceleration kinematics model of BSM.The model can be used to describe the accelerated motion relationships among the screw,balls and nut,calculate the acceleration of relative motion at the contact points between the balls and raceways,and analyze five accelerated motion rules between the balls and raceways.It also conducts a simulation analysis of the slide-roll ratio relationship between the accelerations at the ball center and the contact point of ball under different contact angles and helix angles.As shownby the analysis,with the increase in the BSM’s contact angle,the slide-roll ratio at the contact points decreases,and the contact angle has a relatively significant effect on the slide-roll ratio.However,with the decrease in the BSM’helix angle,the slide-roll ratio at the contact points decreases,and the helix angle has a relatively insignificant effect on the slide-roll ratio.By measuring the accelerations of both the screw and nut under the accelerated motion state,it also verifies the existence of the slide-roll mixed motion at the ball contact point A between the ball and the screw racewayand pure rolling at the ball contact point B between the ball and the nut raceway during the accelerated motion.展开更多
In this paper,the detailed analysis of the influence of thermal and non-Newtonian aspects of lubricant(couple stress fluid)on EHL line contact as a function of slide-roll ratio is presented.The novel low complexity FA...In this paper,the detailed analysis of the influence of thermal and non-Newtonian aspects of lubricant(couple stress fluid)on EHL line contact as a function of slide-roll ratio is presented.The novel low complexity FAS(full approximation scheme),of the multigrid scheme,with Jacobi dipole and Gauss Seidel relaxation is used for the solution of coupled equations viz.modified Reynolds equation,film thickness equation and energy equation satisfying appropriate boundary conditions.The analysis reveals the combined influence of non-Newtonian,thermal and slide-roll ratio(of bearing moving with different speeds)on pressure,film thickness and pressure spike covering a wide range of physical parameters of interest.Results show that pressure spike is strongly influenced by thermal,slide-roll ratio and non-Newtonian character of lubricant with negligible effect on the overall pressure distribution.Also,the minimum film thickness is slightly altered and it increases with the increase in the couple stress parameter.These findings confirm the importance of non-Newtonian and thermal effects in the study of EHL.展开更多
The effects of reduction ratio during roll bonding on the microstructural evolution at interface and subsequent mechanical properties of roll-bonded Al/Cu 2-ply sheets were investigated. The interface microstructures ...The effects of reduction ratio during roll bonding on the microstructural evolution at interface and subsequent mechanical properties of roll-bonded Al/Cu 2-ply sheets were investigated. The interface microstructures for several Al/Cu 2-ply sheets fabricated under different reduction ratios between 30% and 65% were verified by transmission electron microscopy(TEM). Taking the difference of interface microstructure into consideration, 3-point bending and peel tests were performed for obtaining flexural and bonding strengths for Al/Cu 2-ply sheets. The effect of the quantified areas of metallurgical bonding at interfaces on the bonding strength was also discussed. The results show that both the bonding and flexural strengths for Al/Cu 2-ply sheets are reduced by decreasing the reduction ratio during the roll bonding process, which is strongly correlated with the interface microstructure. This was especially verified by observing the interface delamination from the 3-point bent samples.展开更多
基金The National Natural Science Foundation of China(No.51575014,51505012)the Natural Science Foundation of Beijing(No.KZ201410005010)+1 种基金China Postdoctoral Science Foundation(No.2016M591033)Beijing Postdoctoral Research Foundation(No.2015ZZ-13)
文摘To study the effect of the contact angle and helix angle on slide-roll ratio at the ball contact points under the accelerated motion state of ball screw mechanisrm(B S M),the curve theory in differential geometry a d the homogeneous transformation matrix ae used to establish the acceleration kinematics model of BSM.The model can be used to describe the accelerated motion relationships among the screw,balls and nut,calculate the acceleration of relative motion at the contact points between the balls and raceways,and analyze five accelerated motion rules between the balls and raceways.It also conducts a simulation analysis of the slide-roll ratio relationship between the accelerations at the ball center and the contact point of ball under different contact angles and helix angles.As shownby the analysis,with the increase in the BSM’s contact angle,the slide-roll ratio at the contact points decreases,and the contact angle has a relatively significant effect on the slide-roll ratio.However,with the decrease in the BSM’helix angle,the slide-roll ratio at the contact points decreases,and the helix angle has a relatively insignificant effect on the slide-roll ratio.By measuring the accelerations of both the screw and nut under the accelerated motion state,it also verifies the existence of the slide-roll mixed motion at the ball contact point A between the ball and the screw racewayand pure rolling at the ball contact point B between the ball and the nut raceway during the accelerated motion.
文摘In this paper,the detailed analysis of the influence of thermal and non-Newtonian aspects of lubricant(couple stress fluid)on EHL line contact as a function of slide-roll ratio is presented.The novel low complexity FAS(full approximation scheme),of the multigrid scheme,with Jacobi dipole and Gauss Seidel relaxation is used for the solution of coupled equations viz.modified Reynolds equation,film thickness equation and energy equation satisfying appropriate boundary conditions.The analysis reveals the combined influence of non-Newtonian,thermal and slide-roll ratio(of bearing moving with different speeds)on pressure,film thickness and pressure spike covering a wide range of physical parameters of interest.Results show that pressure spike is strongly influenced by thermal,slide-roll ratio and non-Newtonian character of lubricant with negligible effect on the overall pressure distribution.Also,the minimum film thickness is slightly altered and it increases with the increase in the couple stress parameter.These findings confirm the importance of non-Newtonian and thermal effects in the study of EHL.
基金Project(10037273) supported by the Ministry of Knowledge Economy,Korea
文摘The effects of reduction ratio during roll bonding on the microstructural evolution at interface and subsequent mechanical properties of roll-bonded Al/Cu 2-ply sheets were investigated. The interface microstructures for several Al/Cu 2-ply sheets fabricated under different reduction ratios between 30% and 65% were verified by transmission electron microscopy(TEM). Taking the difference of interface microstructure into consideration, 3-point bending and peel tests were performed for obtaining flexural and bonding strengths for Al/Cu 2-ply sheets. The effect of the quantified areas of metallurgical bonding at interfaces on the bonding strength was also discussed. The results show that both the bonding and flexural strengths for Al/Cu 2-ply sheets are reduced by decreasing the reduction ratio during the roll bonding process, which is strongly correlated with the interface microstructure. This was especially verified by observing the interface delamination from the 3-point bent samples.
