Layered rock mass of significant strength changes for adjacent layers is frequently observed in underground excavation,and dynamic loading is a prevalent scenario generated during excavation.In order to improve the dr...Layered rock mass of significant strength changes for adjacent layers is frequently observed in underground excavation,and dynamic loading is a prevalent scenario generated during excavation.In order to improve the driving efficiency and reduce engineering accidents,dynamic compression characteristics of this kind of rock mass should be understood.The dynamic properties of a layered composite rock mass are investigated through a series of rock tests and numerical simulations.The rock mass is artificially made of various proportions of sand,cement and water to control the distinct strength variations at various composite layers separated by parallel bedding planes.All rock specimens are prefabricated in a specially designed mould and then cut into 50 mm in diameter and 50 mm in height for split Hopkinson pressure bar(SHPB)dynamic compression testing.The test results reveal that increasing strain rate causes the increases of peak strength,σ_p,and the corresponding failure strain,ε_p,while the dynamic elastic modulus,E_d,remains almost unchanged.Interestingly,under the same strain rates,Ed of the composite rock specimen is found to decline first and then increase as the dip angle of bedding plane increases.The obtained rock failure patterns due to various dip angles lead to failure modes that could be classified into four categories from our dynamic tests.Also,a series of counterpart numerical simulations has been undertaken,showing that dynamic responses are in good agreement with those obtained from the SHPB tests.The numerical analysis enables us to Iook into the dynamic characteristics of the composite rock mass subjected to a broader range of strain rates and dip angles than these being tested.展开更多
The irregularity of jointed network poses a challenge to the determination of field mechanical param-eters of columnar jointed rock mass(CJRM),and a reasonable prediction of deformation and strength characteristics of...The irregularity of jointed network poses a challenge to the determination of field mechanical param-eters of columnar jointed rock mass(CJRM),and a reasonable prediction of deformation and strength characteristics of CJRM is important for engineering construction.The Voronoi diagram and three-dimensional printing technology were used to make an irregular columnar jointed mold,and the irregular CJRM(ICJRM)specimens with different dip directions and dip angles were prepared.Uniaxial compression tests were performed,and the anisotropic strength and deformation characteristics of ICJRM were described.The failure modes and mechanisms were revealed in accordance with the final appearances of the ICJRM specimens.Based on the model test results,the empirical correlations for determining the field deformation and strength parameters of CJRM were derived using the dip angle and modified joint factor.The proposed empirical equations were used in the Baihetan Project,and the calculated mechanical parameters were compared with the field test results and those obtained from the tunneling quality index method.Results showed that the deformation parameters determined by the two proposed methods are all consistent with the field test results,and these two methods can also estimate the strength parameters effectively.展开更多
The most commonly used method for assessing the hydraulic erodibility of rock is Annandale's method.This method is based on a correlation between the erosive force of flowing water and the capacity of rock resista...The most commonly used method for assessing the hydraulic erodibility of rock is Annandale's method.This method is based on a correlation between the erosive force of flowing water and the capacity of rock resistance. This capacity is evaluated using Kirsten's index, which was initially developed to evaluate the excavatability of earth materials. For rocky material, this index is determined according to certain geomechanical factors related to intact rock and rock mass, such as compressive strength of intact rock, rock block size, discontinuity shear strength and relative block structure. To quantify the relative block structure, Kirsten(1982) developed a mathematical expression that accounts for the shape and orientation of the blocks relative to the direction of flow. Kirsten's initial concept for assessing the relative block structure considers that the geological formation is mainly fractured by two joint sets forming an orthogonally fractured system. An adjusted concept is proposed to determine the relative block structure when the fractured system is non-orthogonal where the angle between the planes of the two joint sets is greater or less than 90°. An analysis of the proposed relative block structure rating shows that considering a non-orthogonally fractured system has a significant effect on Kirsten's index and, as a consequence, on the assessment of the hydraulic erodibility of rock.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.51608174)the Programmes for Science and Technology Development of Henan Province,China(Grant No.192102310014)。
文摘Layered rock mass of significant strength changes for adjacent layers is frequently observed in underground excavation,and dynamic loading is a prevalent scenario generated during excavation.In order to improve the driving efficiency and reduce engineering accidents,dynamic compression characteristics of this kind of rock mass should be understood.The dynamic properties of a layered composite rock mass are investigated through a series of rock tests and numerical simulations.The rock mass is artificially made of various proportions of sand,cement and water to control the distinct strength variations at various composite layers separated by parallel bedding planes.All rock specimens are prefabricated in a specially designed mould and then cut into 50 mm in diameter and 50 mm in height for split Hopkinson pressure bar(SHPB)dynamic compression testing.The test results reveal that increasing strain rate causes the increases of peak strength,σ_p,and the corresponding failure strain,ε_p,while the dynamic elastic modulus,E_d,remains almost unchanged.Interestingly,under the same strain rates,Ed of the composite rock specimen is found to decline first and then increase as the dip angle of bedding plane increases.The obtained rock failure patterns due to various dip angles lead to failure modes that could be classified into four categories from our dynamic tests.Also,a series of counterpart numerical simulations has been undertaken,showing that dynamic responses are in good agreement with those obtained from the SHPB tests.The numerical analysis enables us to Iook into the dynamic characteristics of the composite rock mass subjected to a broader range of strain rates and dip angles than these being tested.
基金This work was supported by the Fundamental Research Funds for the Central Universities,the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX21_0487)the National Natural Science Foundation of China(Grant Nos.41831278,and 51579081).
文摘The irregularity of jointed network poses a challenge to the determination of field mechanical param-eters of columnar jointed rock mass(CJRM),and a reasonable prediction of deformation and strength characteristics of CJRM is important for engineering construction.The Voronoi diagram and three-dimensional printing technology were used to make an irregular columnar jointed mold,and the irregular CJRM(ICJRM)specimens with different dip directions and dip angles were prepared.Uniaxial compression tests were performed,and the anisotropic strength and deformation characteristics of ICJRM were described.The failure modes and mechanisms were revealed in accordance with the final appearances of the ICJRM specimens.Based on the model test results,the empirical correlations for determining the field deformation and strength parameters of CJRM were derived using the dip angle and modified joint factor.The proposed empirical equations were used in the Baihetan Project,and the calculated mechanical parameters were compared with the field test results and those obtained from the tunneling quality index method.Results showed that the deformation parameters determined by the two proposed methods are all consistent with the field test results,and these two methods can also estimate the strength parameters effectively.
基金the organizations that have funded this project:the Natural Sciences and Engineering Research Council of Canada(Grant No.498020-16)Hydro-Quebec(NC-525700)Mitacs Accelerate Program(Grant Ref.IT10008)
文摘The most commonly used method for assessing the hydraulic erodibility of rock is Annandale's method.This method is based on a correlation between the erosive force of flowing water and the capacity of rock resistance. This capacity is evaluated using Kirsten's index, which was initially developed to evaluate the excavatability of earth materials. For rocky material, this index is determined according to certain geomechanical factors related to intact rock and rock mass, such as compressive strength of intact rock, rock block size, discontinuity shear strength and relative block structure. To quantify the relative block structure, Kirsten(1982) developed a mathematical expression that accounts for the shape and orientation of the blocks relative to the direction of flow. Kirsten's initial concept for assessing the relative block structure considers that the geological formation is mainly fractured by two joint sets forming an orthogonally fractured system. An adjusted concept is proposed to determine the relative block structure when the fractured system is non-orthogonal where the angle between the planes of the two joint sets is greater or less than 90°. An analysis of the proposed relative block structure rating shows that considering a non-orthogonally fractured system has a significant effect on Kirsten's index and, as a consequence, on the assessment of the hydraulic erodibility of rock.
