期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
Safety effectiveness of roadway conversion with a two way left turn lane 被引量:1
1
作者 Subasish Das Xiaoduan Sun +1 位作者 Karen Dixon M.Ashifur Rahman 《Journal of Traffic and Transportation Engineering(English Edition)》 2018年第4期309-317,共9页
In urban or suburban areas with a large number of access points, four-lane undivided highways are prone to crashes due to left-turning and through movements in a single lane. Many studies recommended expensive counter... In urban or suburban areas with a large number of access points, four-lane undivided highways are prone to crashes due to left-turning and through movements in a single lane. Many studies recommended expensive countermeasures like conversion from undivided to divided road with physical separation. One inexpensive alternative is reconfiguring the existing roadways by either increasing or decreasing the number of lanes. This study investigated the safety impact of converting four lane undivided roadways (4U) to five lane undivided roadways (ST) with a two way left turn lane (TIkrLTL). This study used Empirical Bayes method to determine the safety impact of this inexpensive countermeasure. In this study, data from eight sites from Louisiana were collected for investigation, and site- specific crash modification factor (CMF) values were calculated. Although ST is usually not preferable due to its exposure of higher number of crashes in the existing literature, the findings of the current study indicated a positive safety impact. The benefit-cost ratio of this conversion ranges from 97 to 379. The current findings indicate that conversion of 4U to 5T is a feasible inexpensive solution for urban roadways with lower volume and a limited number of driveways. 展开更多
关键词 Lane restriping Two way left turn lane Empirical Bayes Crash modification factor Benefit cost ratio
原文传递
基于倒堆工艺的复合煤层回采对矿山生产能力影响
2
作者 马力 李克民 +2 位作者 丁小华 彭洪阁 肖双双 《煤炭工程》 北大核心 2014年第7期12-15,共4页
针对黑岱沟露天煤矿抛掷爆破—拉斗铲剥离工艺及生产能力高位运行的现状,为了解决现条件下9号煤无法采出的问题,提出了单铲逐层倒堆和追踪式变采宽开采两种可行方案,并分析了两种开采方案对生产能力的影响。结果表明:单铲逐层倒堆使设... 针对黑岱沟露天煤矿抛掷爆破—拉斗铲剥离工艺及生产能力高位运行的现状,为了解决现条件下9号煤无法采出的问题,提出了单铲逐层倒堆和追踪式变采宽开采两种可行方案,并分析了两种开采方案对生产能力的影响。结果表明:单铲逐层倒堆使设备效率降低,生产能力最高能达到24.46Mt/a;追踪式变采宽方案能达到的生产能力为28Mt/a左右,且当6号煤端帮到界后在端帮处舍弃长度为160m的9号煤时生产能力可达到30Mt/a的生产要求。 展开更多
关键词 露天煤矿 倒堆工艺 复合煤层 追踪式变采宽开采
下载PDF
倾斜薄煤层选采工艺在霍林河南露天矿的应用
3
作者 于海里 赵红泽 +2 位作者 李伟 李云峰 房新胜 《露天采矿技术》 CAS 2015年第9期12-14,18,共4页
霍林河南露天矿的煤层地质构造复杂,煤层多,断层发育,煤层倾角较大,倾斜薄煤层较多;由于夹矸较多,各煤层大部分为复合煤层,加上纵横断层切割,致使采煤工程难度较大,针对此情况提出了合理的选采方法,以供类似矿山借鉴。
关键词 倾斜薄煤层 选采 底部煤层倒堆工艺
下载PDF
单分散微球压敏胶的研究
4
作者 穆锐 邓爱民 邓玉海 《沈阳工业学院学报》 2001年第4期75-78,共4页
介绍了一种利用 SPG膜乳化法制造单分散性粘性微粒子的新方法 .与通常所使用的直接悬浮聚合法生产的粘性微粒子制成的压敏胶相比 。
关键词 SPG膜乳化 单分散粘性微粒子 再剥离性 压敏胶 粘合性能
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部