H13-mod steel developed after optimizing the composition and heat treatment process exhibits good hardness and impact toughness and can be used as a shield machine hob.Based on the Avrami equation,the dynamic recrysta...H13-mod steel developed after optimizing the composition and heat treatment process exhibits good hardness and impact toughness and can be used as a shield machine hob.Based on the Avrami equation,the dynamic recrystallization(DRX)behaviour of H13-mod steel during hot compression was studied in the temperature of 900-1150°C and strain rate ranges of 0.01-10 s^-1.A DRX model and finite element software were used to study DRX behaviour of H13-mod steel.Significant DRX was found at both low and high strain rates.Electron backscatter diffraction and optical microscopy analyses found different DRX nucleation mechanisms at low and high strain rates under different deformations.At a low strain rate,the nucleation was dominated by the strain-induced grain boundary migration,whereas the subgrain coalescence mechanism was dominant at a high strain rate.Moreover,dynamic recovery occurred in both processes.In addition,it was easier to obtain small and uniform equiaxed grains at high strain rates than at low strain rates.展开更多
Nanoparticles in solution offer unique electrical, mechanical and thermal properties due to their physical presence and interac- tion with the state of dispersion. This work is aimed to study the effects of hydroxyapa...Nanoparticles in solution offer unique electrical, mechanical and thermal properties due to their physical presence and interac- tion with the state of dispersion. This work is aimed to study the effects of hydroxyapatite （HA） nanoparticles on the behavior of devitrification and recrystallization of glycerol （60% w/w） and PEG-600 （50% w/w） solutions during warming. HA nano- particles of different sizes （20, 40, 60 nm） and concentrations （0.1%, 0.5%, w/w） were incorporated into solutions, and were studied by calorimetric analysis coupled with cryomicroscopy. The presence of HA nanoparticles has little effect on the devit- rification end temperatures, but affects the devitrification onset temperatures of glycerol and PEG-600 solutions. The investi- gation with the cryomicroscope observed that the ice morphologies of glycerol and PEG-600 solutions are dendritic and spher- ic respectively. The ice fraction of glycerol solution containing 0.1% HA with the size of 60 nm decreased to 2/5 of that of the solution without nanoparticles at -45℃. The ice fractions of PEG-600 solutions increased signifcantly between -64℃ and -54℃, and the ice fraction of PEG-600 solution without nanoparticles increased by 92% within the temperature range. The findings have significant implications for biomaterial cryopreservation, cryosurgery, and food manufacturing. The complexity of ice crystal growth kinetics in nanoparticle-containing solutions awaits further study.展开更多
Bridge steel has been widely used in recent years for its excellent performance. Understanding the high-temperature Dynamic Recrystallization (DRX) behavior of high-performance bridge steel plays an important role in ...Bridge steel has been widely used in recent years for its excellent performance. Understanding the high-temperature Dynamic Recrystallization (DRX) behavior of high-performance bridge steel plays an important role in guiding the thermomechanical processing process. In the present study, the hot deformation behavior of Q370qE bridge steel was investigated by hot compression tests conducted on a Gleeble 3800-GTC thermal-mechanical physical simulation system at temperatures ranging from 900 ℃ to 1100 ℃ and strain rates ranging from 0.01 s^(−1) to 10 s^(−1). The obtained results were used to plot the true stress-strain and work-hardening rate curves of the experimental steel, with the latter curves used to determine the critical strains for the initiation of DRX. The Zener-Hollomon equation was subsequently applied to establish the correspondence between temperature and strain rate during the high-temperature plastic deformation of bridge steel. In terms of the DRX volume fraction solution, a new method for establishing DRX volume fraction was proposed based on two theoretical models. The good weathering and corrosion resistance of bridge steel lead to difculties in microstructure etching. To solve this, the MTEX technology was used to further develop EBSD data to characterize the original microstructure of Q370qE bridge steel. This paper lays the theoretical foundation for studying the DRX behavior of Q370qE bridge steel.展开更多
基金This work was supported by National Natural Science Foundation of China(Grant No.51571066)Guizhou Science and Technology Project(Grant Nos.20165654 and 20162326).
文摘H13-mod steel developed after optimizing the composition and heat treatment process exhibits good hardness and impact toughness and can be used as a shield machine hob.Based on the Avrami equation,the dynamic recrystallization(DRX)behaviour of H13-mod steel during hot compression was studied in the temperature of 900-1150°C and strain rate ranges of 0.01-10 s^-1.A DRX model and finite element software were used to study DRX behaviour of H13-mod steel.Significant DRX was found at both low and high strain rates.Electron backscatter diffraction and optical microscopy analyses found different DRX nucleation mechanisms at low and high strain rates under different deformations.At a low strain rate,the nucleation was dominated by the strain-induced grain boundary migration,whereas the subgrain coalescence mechanism was dominant at a high strain rate.Moreover,dynamic recovery occurred in both processes.In addition,it was easier to obtain small and uniform equiaxed grains at high strain rates than at low strain rates.
基金supported by the National Natural Science Foundation of China(Grant No.51076108)the Doctoral Program(Grant No.20103120110005)the Shanghai Dongfang Scholars Program
文摘Nanoparticles in solution offer unique electrical, mechanical and thermal properties due to their physical presence and interac- tion with the state of dispersion. This work is aimed to study the effects of hydroxyapatite （HA） nanoparticles on the behavior of devitrification and recrystallization of glycerol （60% w/w） and PEG-600 （50% w/w） solutions during warming. HA nano- particles of different sizes （20, 40, 60 nm） and concentrations （0.1%, 0.5%, w/w） were incorporated into solutions, and were studied by calorimetric analysis coupled with cryomicroscopy. The presence of HA nanoparticles has little effect on the devit- rification end temperatures, but affects the devitrification onset temperatures of glycerol and PEG-600 solutions. The investi- gation with the cryomicroscope observed that the ice morphologies of glycerol and PEG-600 solutions are dendritic and spher- ic respectively. The ice fraction of glycerol solution containing 0.1% HA with the size of 60 nm decreased to 2/5 of that of the solution without nanoparticles at -45℃. The ice fractions of PEG-600 solutions increased signifcantly between -64℃ and -54℃, and the ice fraction of PEG-600 solution without nanoparticles increased by 92% within the temperature range. The findings have significant implications for biomaterial cryopreservation, cryosurgery, and food manufacturing. The complexity of ice crystal growth kinetics in nanoparticle-containing solutions awaits further study.
基金Supported by Regional Joint Funds of National Natural Science Foundation of China(Grant No.U20A20289)Hebei Provincial Innovative Research Groups Project of Natural Science Foundation of China(Grant No.E2021203011)+2 种基金General Program of National Natural Science Foundation of China(Grant Nos.52075471,52075473)Hebei Provincial Excellent Youth Science Foundation of China(Grant No.E2021203190)Hebei Provincial Innovative Capacity Cultivation Funding Project for Postgraduates of China(Grant No.CXZZSS2023040).
文摘Bridge steel has been widely used in recent years for its excellent performance. Understanding the high-temperature Dynamic Recrystallization (DRX) behavior of high-performance bridge steel plays an important role in guiding the thermomechanical processing process. In the present study, the hot deformation behavior of Q370qE bridge steel was investigated by hot compression tests conducted on a Gleeble 3800-GTC thermal-mechanical physical simulation system at temperatures ranging from 900 ℃ to 1100 ℃ and strain rates ranging from 0.01 s^(−1) to 10 s^(−1). The obtained results were used to plot the true stress-strain and work-hardening rate curves of the experimental steel, with the latter curves used to determine the critical strains for the initiation of DRX. The Zener-Hollomon equation was subsequently applied to establish the correspondence between temperature and strain rate during the high-temperature plastic deformation of bridge steel. In terms of the DRX volume fraction solution, a new method for establishing DRX volume fraction was proposed based on two theoretical models. The good weathering and corrosion resistance of bridge steel lead to difculties in microstructure etching. To solve this, the MTEX technology was used to further develop EBSD data to characterize the original microstructure of Q370qE bridge steel. This paper lays the theoretical foundation for studying the DRX behavior of Q370qE bridge steel.
