The influence of quenching rate on microstructure and stress corrosion cracking （SCC） of 7085 aluminum alloy was investigated by tensile test, slow strain rate test （SSRT）, combined with scanning electron microsco...The influence of quenching rate on microstructure and stress corrosion cracking （SCC） of 7085 aluminum alloy was investigated by tensile test, slow strain rate test （SSRT）, combined with scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and electrochemical test. The results show that with decreasing the quenching rate, the size and inter-particle distance of the grain boundary precipitates as well as precipitation free zone width increase, but the copper content of grain boundary precipitates decreases. The SCC resistance of the samples increases first and then decreases, which is attributed to the copper content, size and distribution of grain boundary precipitates.展开更多
The effect of quenching rate on the aging precipitation behavior and properties of Al-Zn-Mg-Cu-Zr-Er alloy was investigated.The scanning electron microscopy,transmission electron microscopy,and atom probe tomography w...The effect of quenching rate on the aging precipitation behavior and properties of Al-Zn-Mg-Cu-Zr-Er alloy was investigated.The scanning electron microscopy,transmission electron microscopy,and atom probe tomography were used to study the characteristics of clusters and precipitates in the alloy.The quench-inducedηphase and a large number of clusters are formed in the air-cooled alloy with the slowest cooling rate,which contributes to an increment of hardness by 24%(HV 26)compared with that of the water-quenched one.However,the aging hardening response speed and peak-aged hardness of the alloy increase with the increase of quenching rate.Meanwhile,the water-quenched alloy after peak aging also has the highest strength,elongation,and corrosion resistance,which is due to the high driving force and increased number density of aging precipitates,and the narrowed precipitate free zones.展开更多
Nanoparticles and nanowires of LaPO 4: Eu phosphors were synthesized by hydrothermal method. Their luminescent properties including electronic transition, surface effect, and temperature-dependent luminescent charact...Nanoparticles and nanowires of LaPO 4: Eu phosphors were synthesized by hydrothermal method. Their luminescent properties including electronic transition, surface effect, and temperature-dependent luminescent characteristics were systemically studied and compared to the bulk powders. It can be concluded that in comparison with the bulk powders, the fluorescence intensity decreases in nanoparticles and nanowires, while the lifetime increases, indicating that the radiative transition rate decreases. The nonradiative transition rate in nanowires decreases than that in nanoparticles due to its decreased surface to volume ratio. The temperature-dependent experiments indicate that the thermal quenching in nanopowders becomes weaker than that in the bulk powders.展开更多
基金Projects (2010CB731701, 2012CB619502) supported by National Basic Research Program of ChinaProject (51021063) supported by the Creative Research Group of National Natural Science Foundation of China
文摘The influence of quenching rate on microstructure and stress corrosion cracking （SCC） of 7085 aluminum alloy was investigated by tensile test, slow strain rate test （SSRT）, combined with scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and electrochemical test. The results show that with decreasing the quenching rate, the size and inter-particle distance of the grain boundary precipitates as well as precipitation free zone width increase, but the copper content of grain boundary precipitates decreases. The SCC resistance of the samples increases first and then decreases, which is attributed to the copper content, size and distribution of grain boundary precipitates.
基金the financial supports from the National Natural Science Foundation of China(No.51871033)the Opening Project of State Key Laboratory for Advanced Metals and Materials,China(No.2020-ZD02)。
文摘The effect of quenching rate on the aging precipitation behavior and properties of Al-Zn-Mg-Cu-Zr-Er alloy was investigated.The scanning electron microscopy,transmission electron microscopy,and atom probe tomography were used to study the characteristics of clusters and precipitates in the alloy.The quench-inducedηphase and a large number of clusters are formed in the air-cooled alloy with the slowest cooling rate,which contributes to an increment of hardness by 24%(HV 26)compared with that of the water-quenched one.However,the aging hardening response speed and peak-aged hardness of the alloy increase with the increase of quenching rate.Meanwhile,the water-quenched alloy after peak aging also has the highest strength,elongation,and corrosion resistance,which is due to the high driving force and increased number density of aging precipitates,and the narrowed precipitate free zones.
文摘Nanoparticles and nanowires of LaPO 4: Eu phosphors were synthesized by hydrothermal method. Their luminescent properties including electronic transition, surface effect, and temperature-dependent luminescent characteristics were systemically studied and compared to the bulk powders. It can be concluded that in comparison with the bulk powders, the fluorescence intensity decreases in nanoparticles and nanowires, while the lifetime increases, indicating that the radiative transition rate decreases. The nonradiative transition rate in nanowires decreases than that in nanoparticles due to its decreased surface to volume ratio. The temperature-dependent experiments indicate that the thermal quenching in nanopowders becomes weaker than that in the bulk powders.
