Optimization of mapping rule of bit-interleaved Turbo coded modulation with 16 quadrature amplitude modulation (QAM) is investigated based on different impacts of various encoded bits sequence on Turbo decoding perfor...Optimization of mapping rule of bit-interleaved Turbo coded modulation with 16 quadrature amplitude modulation (QAM) is investigated based on different impacts of various encoded bits sequence on Turbo decoding performance. Furthermore, bit-interleaved in-phase and quadrature phase (I-Q) Turbo coded modulation scheme are designed similarly with I-Q trellis coded modulation (TCM). Through performance evaluation and analysis, it can be seen that the novel mapping rule outperforms traditional one and the I-Q Turbo coded modulation can not achieve good performance as expected. Therefore, there is not obvious advantage in using I-Q method in bit-interleaved Turbo coded modulation.展开更多
With the successful demonstration of terahertz(THz)high-speed wireless data transmission,the THz frequencies are now becoming a worth candidate for post-5G wireless communications.On the other hand,to bring THz commun...With the successful demonstration of terahertz(THz)high-speed wireless data transmission,the THz frequencies are now becoming a worth candidate for post-5G wireless communications.On the other hand,to bring THz communications a step closer to real scenario application,solving high data rate realtime transmission is also an important issue.This paper describes a 220-GHz solid-state dual-carrier wireless link whose maximum transmission real-time data rates are 20.8 Gbps(10.4 Gbps per channel).By aggregating two carrier signals in the THz band,the contradiction between high real-time data rate communication and low sampling rate analog-to-digital(ADC)and digital-to-analog converter(DAC)is alleviated.The transmitting and receiving front-ends consist of 220-GHz diplexers,220-GHz sub-harmonic mixers based on anti-parallel Schottky barrier diodes,G-band low-noise amplifiers(LNA),WR-4.3 band high-gain Cassegrain antennas,high data rates dual-DAC and-ADC baseband platform and other components.The low-density parity-check(LDPC)encoding is also realized to improve the bit error rate(BER)of the received signal.Modulated signals are centered at 214.4 GHz and 220.6 GHz with-11.9 dBm and-13.4 dBm output power for channel 1 and 2,respectively.This link is demonstrated to achieve 20.8-Gbps real-time data transmission using 16-QAM modulation over a distance of 1030 m.The measured signal to noise ratio(SNR)is 17.3 dB and 16.5 dB,the corresponding BER is 8.6e-7 and 3.8e-7,respectively.Furthermore,4K video transmission is also carried out which is clear and free of stutter.The successful transmission of aggregated channels in this wireless link shows the great potential of THz communication for future wireless high-rate real-time data transmission applications.展开更多
基于Vi t erbi-Vi t erbi算法原理,提出了一种适用于Square m-QAM相干光通信系统载波相位估计的改进算法,能够充分利用所有符号的相位信息进行载波相位估计。仿真分析表明,改进算法比现有其它算法复杂度更低,相位噪声容限更大,当BER=10-...基于Vi t erbi-Vi t erbi算法原理,提出了一种适用于Square m-QAM相干光通信系统载波相位估计的改进算法,能够充分利用所有符号的相位信息进行载波相位估计。仿真分析表明,改进算法比现有其它算法复杂度更低,相位噪声容限更大,当BER=10-3、SNR代价为2dB时,16-QAM和64-QAM允许的激光线宽分别为1.1MHz和0.25MHz。展开更多
文摘Optimization of mapping rule of bit-interleaved Turbo coded modulation with 16 quadrature amplitude modulation (QAM) is investigated based on different impacts of various encoded bits sequence on Turbo decoding performance. Furthermore, bit-interleaved in-phase and quadrature phase (I-Q) Turbo coded modulation scheme are designed similarly with I-Q trellis coded modulation (TCM). Through performance evaluation and analysis, it can be seen that the novel mapping rule outperforms traditional one and the I-Q Turbo coded modulation can not achieve good performance as expected. Therefore, there is not obvious advantage in using I-Q method in bit-interleaved Turbo coded modulation.
基金the National Natural Science Foundation of China(NSFC)under Grant 91738102,Grant 61771116,and Grant 62022022。
文摘With the successful demonstration of terahertz(THz)high-speed wireless data transmission,the THz frequencies are now becoming a worth candidate for post-5G wireless communications.On the other hand,to bring THz communications a step closer to real scenario application,solving high data rate realtime transmission is also an important issue.This paper describes a 220-GHz solid-state dual-carrier wireless link whose maximum transmission real-time data rates are 20.8 Gbps(10.4 Gbps per channel).By aggregating two carrier signals in the THz band,the contradiction between high real-time data rate communication and low sampling rate analog-to-digital(ADC)and digital-to-analog converter(DAC)is alleviated.The transmitting and receiving front-ends consist of 220-GHz diplexers,220-GHz sub-harmonic mixers based on anti-parallel Schottky barrier diodes,G-band low-noise amplifiers(LNA),WR-4.3 band high-gain Cassegrain antennas,high data rates dual-DAC and-ADC baseband platform and other components.The low-density parity-check(LDPC)encoding is also realized to improve the bit error rate(BER)of the received signal.Modulated signals are centered at 214.4 GHz and 220.6 GHz with-11.9 dBm and-13.4 dBm output power for channel 1 and 2,respectively.This link is demonstrated to achieve 20.8-Gbps real-time data transmission using 16-QAM modulation over a distance of 1030 m.The measured signal to noise ratio(SNR)is 17.3 dB and 16.5 dB,the corresponding BER is 8.6e-7 and 3.8e-7,respectively.Furthermore,4K video transmission is also carried out which is clear and free of stutter.The successful transmission of aggregated channels in this wireless link shows the great potential of THz communication for future wireless high-rate real-time data transmission applications.
文摘基于Vi t erbi-Vi t erbi算法原理,提出了一种适用于Square m-QAM相干光通信系统载波相位估计的改进算法,能够充分利用所有符号的相位信息进行载波相位估计。仿真分析表明,改进算法比现有其它算法复杂度更低,相位噪声容限更大,当BER=10-3、SNR代价为2dB时,16-QAM和64-QAM允许的激光线宽分别为1.1MHz和0.25MHz。
