提出了一种新型通带可控、损耗较低的四频带通滤波器结构。该滤波器的组成采用二阶新型多枝节加载四模谐振器。该谐振器有4个可单独控制的谐振模式,致使滤波器的中心频率可单独调控,通过控制两谐振器间的耦合系数,滤波器带宽可控。实验...提出了一种新型通带可控、损耗较低的四频带通滤波器结构。该滤波器的组成采用二阶新型多枝节加载四模谐振器。该谐振器有4个可单独控制的谐振模式,致使滤波器的中心频率可单独调控,通过控制两谐振器间的耦合系数,滤波器带宽可控。实验结果表明,该滤波器通带可控并满足小型化的要求,4个通频带中心频率是2.5/3.1/4/5.05 GHz,插入损耗为0.1/0.27/0.13/0.16 d B,每个通带的回波损耗都优于15 d B。实测结果与仿真结果一致。展开更多
The design of single-and quad-band Bandpass Filter(BPF)topology has been presented in this paper for next-generation Internet of Things(IoT)devices.The main topology is constructed using the Split Ring Resonator(SRR),...The design of single-and quad-band Bandpass Filter(BPF)topology has been presented in this paper for next-generation Internet of Things(IoT)devices.The main topology is constructed using the Split Ring Resonator(SRR),separated by the Anti-Parallel Coupled Line Structure(APCLS).A detailed analysis of APCLS has been presented,which is further used to construct the single-and quad-band BPF.The single-band BPF design consists of SRR loaded with APCLS.The developed single-band BPF displays a dual-mode response with a center frequency of 2.65 GHz and a measured fractional bandwidth of 17.17%.Moreover,a quad-band bandpass filter has been achieved using the same topology with minor modification in the SRR and APCLS electrical parameters.The developed quad-band BPF generates a dual-mode response having center frequencies of 1.2,2.4,3.5,and 4.7 GHz with the measured fractional bandwidth of 13%,26%,16%,and 5%,respectively.Two prototypes have been fabricated on the highfrequency substrate to validate the proposed topologies.Very high rejection in the stopbands region,little in-band insertion loss,and very selective passband have been measured for single-and quad-band BPFs.The measured and simulated results are well correlated.展开更多
In this paper a novel,compact,microstrip-fed,quad-band monopole antenna is presented for the application of Global System for Mobile communication(GSM 900),Worldwide Interoperability for Microwave Access(WiMAX)and Wir...In this paper a novel,compact,microstrip-fed,quad-band monopole antenna is presented for the application of Global System for Mobile communication(GSM 900),Worldwide Interoperability for Microwave Access(WiMAX)and Wireless Local Area Network(WLAN).The proposed antenna comprises of a sickle-shaped structure with four circular arc strips,and a modified rectangular ground plane.The four strips of the antenna are independently responsible for the four different resonant frequencies of the operating bands and can be tuned separately to control the radiation performance.The proposed quad-band antenna is designed to resonate at 940 MHz for GSM 900,2.5 and 3.5 GHz for WiMAX and 5.85 GHz for WLAN applications.At the four intended operating bands,the antenna exhibits impedance bandwidth of 60 MHz(905–965MHz),80 MHz(2.45–2.53 GHz),110 MHz(3.48–3.59 GHz)and 2.39 GHz(4.82–7.21 GHz),respectively.At the resonance frequency of the four bands,the gain of the proposed antenna is obtained as 4.2,2.5,1.7 and 1.9 dBi,respectively.A prototype of the designed antenna is fabricated and a good agreement between simulated and measured results is observed.Furthermore,the proposed antenna shows good radiation characteristics and gains at all the four operating bands.展开更多
In this paper, a novel Voltage-Controlled Oscillator （VCO） using the harmonic control circuit based on the quad-band Composite Right/Left-Handed （CRLH） Transmission Line （TL） is presented to reduce the phase noi...In this paper, a novel Voltage-Controlled Oscillator （VCO） using the harmonic control circuit based on the quad-band Composite Right/Left-Handed （CRLH） Transmission Line （TL） is presented to reduce the phase noise without the reduction of the frequeacy tuning range and miniaturizing the circuit size. The phase noise has been reduced by the quad-band harmonic control circuit which has the short impedance for the second- and third- and fourth- and fifth-hannonic components. The CRLH TL with two Left-Handed （LH） （backward） and two Right-Handed （RH） （forward） pass bands are used to design the quad-band harmonic control circuit. The high- Q resonator has been used to reduce the phase noise, but it has the problem of the frequency timing range reduction. However, the frequency tuning range of the proposed VCO has not reduced because the phase noise has reduced without the high-Q resonator. The miniaturization of the circuit size is achieved by using the quad-band CRLH TL instead of the conventional RH TL, The phase noise of VCO is - 124.43～ - 122.67 dBc/Hz at 100 kHz in the tuning range of 5. 729 ～5.934 GHz.展开更多
文摘提出了一种新型通带可控、损耗较低的四频带通滤波器结构。该滤波器的组成采用二阶新型多枝节加载四模谐振器。该谐振器有4个可单独控制的谐振模式,致使滤波器的中心频率可单独调控,通过控制两谐振器间的耦合系数,滤波器带宽可控。实验结果表明,该滤波器通带可控并满足小型化的要求,4个通频带中心频率是2.5/3.1/4/5.05 GHz,插入损耗为0.1/0.27/0.13/0.16 d B,每个通带的回波损耗都优于15 d B。实测结果与仿真结果一致。
文摘The design of single-and quad-band Bandpass Filter(BPF)topology has been presented in this paper for next-generation Internet of Things(IoT)devices.The main topology is constructed using the Split Ring Resonator(SRR),separated by the Anti-Parallel Coupled Line Structure(APCLS).A detailed analysis of APCLS has been presented,which is further used to construct the single-and quad-band BPF.The single-band BPF design consists of SRR loaded with APCLS.The developed single-band BPF displays a dual-mode response with a center frequency of 2.65 GHz and a measured fractional bandwidth of 17.17%.Moreover,a quad-band bandpass filter has been achieved using the same topology with minor modification in the SRR and APCLS electrical parameters.The developed quad-band BPF generates a dual-mode response having center frequencies of 1.2,2.4,3.5,and 4.7 GHz with the measured fractional bandwidth of 13%,26%,16%,and 5%,respectively.Two prototypes have been fabricated on the highfrequency substrate to validate the proposed topologies.Very high rejection in the stopbands region,little in-band insertion loss,and very selective passband have been measured for single-and quad-band BPFs.The measured and simulated results are well correlated.
基金The authors gracefully acknowledge the support provided by Visvesvaraya PhD scheme,Ministry of Electronics and Information Technology(MeiTy),Govt.of India,Grant No.PhD-MLA/4(29)/2015–16/01.
文摘In this paper a novel,compact,microstrip-fed,quad-band monopole antenna is presented for the application of Global System for Mobile communication(GSM 900),Worldwide Interoperability for Microwave Access(WiMAX)and Wireless Local Area Network(WLAN).The proposed antenna comprises of a sickle-shaped structure with four circular arc strips,and a modified rectangular ground plane.The four strips of the antenna are independently responsible for the four different resonant frequencies of the operating bands and can be tuned separately to control the radiation performance.The proposed quad-band antenna is designed to resonate at 940 MHz for GSM 900,2.5 and 3.5 GHz for WiMAX and 5.85 GHz for WLAN applications.At the four intended operating bands,the antenna exhibits impedance bandwidth of 60 MHz(905–965MHz),80 MHz(2.45–2.53 GHz),110 MHz(3.48–3.59 GHz)and 2.39 GHz(4.82–7.21 GHz),respectively.At the resonance frequency of the four bands,the gain of the proposed antenna is obtained as 4.2,2.5,1.7 and 1.9 dBi,respectively.A prototype of the designed antenna is fabricated and a good agreement between simulated and measured results is observed.Furthermore,the proposed antenna shows good radiation characteristics and gains at all the four operating bands.
文摘In this paper, a novel Voltage-Controlled Oscillator （VCO） using the harmonic control circuit based on the quad-band Composite Right/Left-Handed （CRLH） Transmission Line （TL） is presented to reduce the phase noise without the reduction of the frequeacy tuning range and miniaturizing the circuit size. The phase noise has been reduced by the quad-band harmonic control circuit which has the short impedance for the second- and third- and fourth- and fifth-hannonic components. The CRLH TL with two Left-Handed （LH） （backward） and two Right-Handed （RH） （forward） pass bands are used to design the quad-band harmonic control circuit. The high- Q resonator has been used to reduce the phase noise, but it has the problem of the frequency timing range reduction. However, the frequency tuning range of the proposed VCO has not reduced because the phase noise has reduced without the high-Q resonator. The miniaturization of the circuit size is achieved by using the quad-band CRLH TL instead of the conventional RH TL, The phase noise of VCO is - 124.43～ - 122.67 dBc/Hz at 100 kHz in the tuning range of 5. 729 ～5.934 GHz.
