将由室内试验总结得到的岩石微观胶结模型嵌入离散元软件,对Lac du Bonnet花岗岩石进行预制单裂隙单轴压缩试验DEM数值模拟,分析了压缩过程中裂隙试样中应力的分布,并与理论计算结果进行对比分析,同时对各种断裂判据中裂纹起裂角的预测...将由室内试验总结得到的岩石微观胶结模型嵌入离散元软件,对Lac du Bonnet花岗岩石进行预制单裂隙单轴压缩试验DEM数值模拟,分析了压缩过程中裂隙试样中应力的分布,并与理论计算结果进行对比分析,同时对各种断裂判据中裂纹起裂角的预测值进行了适用性的对比分析。结果表明,离散元模拟试样破坏形态与试验结果相近;离散元分析得到的应力分布与理论解在定性上相似;当预制角度较小时,侧向应力都处于拉压状态;由于裂隙左右两端压应变的集中造成了裂隙上下面拉应变的产生,造成了裂隙周围特殊的应力分布;当裂隙角度较大时,应力集中现象已不明显,因而,理论值与试验值有偏差;在断裂判据中最大周应力准则和最大能量释放率准则得到的裂纹扩展角与室内试验与DEM结果中的数值较为吻合。展开更多
Crack closure is one of the reasons inducing changes of P-wave velocity of rocks under compression.In this context,a method is proposed to investigate the relationships among P-wave velocity,pre-existing cracks,and co...Crack closure is one of the reasons inducing changes of P-wave velocity of rocks under compression.In this context,a method is proposed to investigate the relationships among P-wave velocity,pre-existing cracks,and confining pressure based on the discrete element method(DEM).Pre-existing open cracks inside the rocks are generated by the initial gap of the flat-joint model.The validity of the method is evaluated by comparing the P-wave velocity tested on a sandstone specimen with numerical result.As the crack size is determined by the diameter of particles,the effects of three factors,i.e.number,aspect ratio,and orientation of cracks on the P-wave velocity are discussed.The results show that P-wave velocity is controlled by the(i.e.number) of open micro-cracks,while the closure pressure is determined by the aspect ratio of crack.The reason accounting for the anisotropy of P-wave velocity is the difference in crack number in measurement paths.Both of the number and aspect ratio of cracks can affect the responses of P-wave velocity to the applied confining pressure.Under confining pressure,the number of open cracks inside rocks will dominate the lowest P-wave velocity,and the P-wave velocity of the rock containing narrower cracks is more sensitive to the confining pressure.In this sense,crack density is difficult to be back-calculated merely by P-wave velocity.The proposed method offers a means to analyze the effect of pre-existing cracks on P-wave velocity.展开更多
In order to further study the damage and failure mechanism for rock similar materials,this study investigated the mechanical properties and failure characteristics,law of damage space development,and damage evolution ...In order to further study the damage and failure mechanism for rock similar materials,this study investigated the mechanical properties and failure characteristics,law of damage space development,and damage evolution characteristics for rock similar materials with pre-existing cracks of varying length under uniaxial compression load.The equipment used in this study is the self-developed YYW-Ⅱ strain controlled unconfined compression apparatus and the PCIE-8 acoustic emission monitoring system.Results show that,as the length of pre-existing crack increases:(1) the peak and residual strength reduces,and the peak axial strain and the strain during the initial compression phase increases;(2) the major failure mode is changed from shear failure to tensile failure along a vertical plane that passes the middle of the pre-existing crack;(3) The damage increases during the stable and accelerated development stage,and the effect of the pre-existing cracks is more during the accelerated development stage than the stable development stage.展开更多
文摘将由室内试验总结得到的岩石微观胶结模型嵌入离散元软件,对Lac du Bonnet花岗岩石进行预制单裂隙单轴压缩试验DEM数值模拟,分析了压缩过程中裂隙试样中应力的分布,并与理论计算结果进行对比分析,同时对各种断裂判据中裂纹起裂角的预测值进行了适用性的对比分析。结果表明,离散元模拟试样破坏形态与试验结果相近;离散元分析得到的应力分布与理论解在定性上相似;当预制角度较小时,侧向应力都处于拉压状态;由于裂隙左右两端压应变的集中造成了裂隙上下面拉应变的产生,造成了裂隙周围特殊的应力分布;当裂隙角度较大时,应力集中现象已不明显,因而,理论值与试验值有偏差;在断裂判据中最大周应力准则和最大能量释放率准则得到的裂纹扩展角与室内试验与DEM结果中的数值较为吻合。
基金partially supported by the National Natural Science Foundation of China(Grant Nos.41872210 and 51674238)the Open Research Fund of the State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.Z017006)。
文摘Crack closure is one of the reasons inducing changes of P-wave velocity of rocks under compression.In this context,a method is proposed to investigate the relationships among P-wave velocity,pre-existing cracks,and confining pressure based on the discrete element method(DEM).Pre-existing open cracks inside the rocks are generated by the initial gap of the flat-joint model.The validity of the method is evaluated by comparing the P-wave velocity tested on a sandstone specimen with numerical result.As the crack size is determined by the diameter of particles,the effects of three factors,i.e.number,aspect ratio,and orientation of cracks on the P-wave velocity are discussed.The results show that P-wave velocity is controlled by the(i.e.number) of open micro-cracks,while the closure pressure is determined by the aspect ratio of crack.The reason accounting for the anisotropy of P-wave velocity is the difference in crack number in measurement paths.Both of the number and aspect ratio of cracks can affect the responses of P-wave velocity to the applied confining pressure.Under confining pressure,the number of open cracks inside rocks will dominate the lowest P-wave velocity,and the P-wave velocity of the rock containing narrower cracks is more sensitive to the confining pressure.In this sense,crack density is difficult to be back-calculated merely by P-wave velocity.The proposed method offers a means to analyze the effect of pre-existing cracks on P-wave velocity.
基金This paper is an extended version of a published conference paper Li et al.(2017)this paper gets its funding from Project(51734007)+1 种基金supported by National Natural Science Foundation of ChinaWe would also like to acknowledge the editor-in-chief,editors and the anonymous reviewers for their valuable comments,which have greatly improved this paper.
文摘In order to further study the damage and failure mechanism for rock similar materials,this study investigated the mechanical properties and failure characteristics,law of damage space development,and damage evolution characteristics for rock similar materials with pre-existing cracks of varying length under uniaxial compression load.The equipment used in this study is the self-developed YYW-Ⅱ strain controlled unconfined compression apparatus and the PCIE-8 acoustic emission monitoring system.Results show that,as the length of pre-existing crack increases:(1) the peak and residual strength reduces,and the peak axial strain and the strain during the initial compression phase increases;(2) the major failure mode is changed from shear failure to tensile failure along a vertical plane that passes the middle of the pre-existing crack;(3) The damage increases during the stable and accelerated development stage,and the effect of the pre-existing cracks is more during the accelerated development stage than the stable development stage.
