A power-configurable high performance preamplifier was implemented in standard 180-nm CMOS technology for 12 × 10 Gb/s high-density ultra-high speed parallel optical communication system. With critical limitation...A power-configurable high performance preamplifier was implemented in standard 180-nm CMOS technology for 12 × 10 Gb/s high-density ultra-high speed parallel optical communication system. With critical limitations on power consumption, area and fabrication cost, the preamplifier achieves high performance, e.g. high bandwidth, high trans-impedance gain, low noise and high stability. A novel feed-forward common gate （FCG） stage is adopted to alleviate contradictions on trans-impedance gain and bandwidth by using a low headroom con- suming approach to isolate a large input capacitance and using complex pole peaking techniques to substitute induc- tors to achieve bandwidth extension. A multi-supply power-configurable scheme was employed to avoid wasteful power caused by a pessimistic estimation of process-voltage-temperature （PVT） variation. Two representative sam- ples provide a trans-impedance gain of 53.9 dBf2, a 3-dB bandwidth of 6.8 GHz, a power dissipation of 6.26 mW without power-configuration and a trans-impedance gain of 52.1 dBg2, a 3-dB bandwidth of 8.1 GHz, a power dis- sipation of 6.35 mW with power-configuration, respectively. The measured average input-referred noise-current spectral density is no more than 28 pA/√Hz. The chip area is only 0.08 x 0.08 mm2.展开更多
A single die 1.2 V multi-stage noise shaping（Mash） 2-2 delta sigma analog to digital converter（ADC）for wide applications is implemented. The configurable Mash 2-2 modulator with a new decimation filter design is p...A single die 1.2 V multi-stage noise shaping（Mash） 2-2 delta sigma analog to digital converter（ADC）for wide applications is implemented. The configurable Mash 2-2 modulator with a new decimation filter design is presented to achieve wide and high dynamic range（DR） for multiple practical applications. The novel modulator can be configured as a Mash 2-2 modulator for high precision or a 2-order modulator for low DR. The decimation filter is designed to select the OSR flexibly among cascaded integrator comb（CIC） filter and two half-band filters（HBF）. The serial peripheral interface（SPI） can be used to adjust the sampling frequency and the oversampling ratio（OSR）. The design was fabricated in a 0.13 m CMOS process with an area of 0.91 mm2and a total power of 5.2 mW. The measurement results show that the dynamic range（DR） of the proposed ADC can change from 55to 95 dB with the configurable OSR from 16 to 256. The spurious free dynamic range（SFDR） and signal-to-noise distortion ratio（SNDR） can get 99 dB and 86.5 dB, respectively.展开更多
基金Project supported by the National Natural Science Foundation of China(No.61106024)the Natural Science Foundation of Jiangsu Provice,China(No.BK2010411)
文摘A power-configurable high performance preamplifier was implemented in standard 180-nm CMOS technology for 12 × 10 Gb/s high-density ultra-high speed parallel optical communication system. With critical limitations on power consumption, area and fabrication cost, the preamplifier achieves high performance, e.g. high bandwidth, high trans-impedance gain, low noise and high stability. A novel feed-forward common gate （FCG） stage is adopted to alleviate contradictions on trans-impedance gain and bandwidth by using a low headroom con- suming approach to isolate a large input capacitance and using complex pole peaking techniques to substitute induc- tors to achieve bandwidth extension. A multi-supply power-configurable scheme was employed to avoid wasteful power caused by a pessimistic estimation of process-voltage-temperature （PVT） variation. Two representative sam- ples provide a trans-impedance gain of 53.9 dBf2, a 3-dB bandwidth of 6.8 GHz, a power dissipation of 6.26 mW without power-configuration and a trans-impedance gain of 52.1 dBg2, a 3-dB bandwidth of 8.1 GHz, a power dis- sipation of 6.35 mW with power-configuration, respectively. The measured average input-referred noise-current spectral density is no more than 28 pA/√Hz. The chip area is only 0.08 x 0.08 mm2.
基金Project supported by the National Natural Science Foundation of China(No.60976026)the Guangdong Industry University Research Cooperation Project(No.2011A090200106)+1 种基金the Guangdong Industry University High-Tech Development Guidance(No.2011B010700065)the Second Batch of Strategic Development Special Fund(No.2011912004)
文摘A single die 1.2 V multi-stage noise shaping（Mash） 2-2 delta sigma analog to digital converter（ADC）for wide applications is implemented. The configurable Mash 2-2 modulator with a new decimation filter design is presented to achieve wide and high dynamic range（DR） for multiple practical applications. The novel modulator can be configured as a Mash 2-2 modulator for high precision or a 2-order modulator for low DR. The decimation filter is designed to select the OSR flexibly among cascaded integrator comb（CIC） filter and two half-band filters（HBF）. The serial peripheral interface（SPI） can be used to adjust the sampling frequency and the oversampling ratio（OSR）. The design was fabricated in a 0.13 m CMOS process with an area of 0.91 mm2and a total power of 5.2 mW. The measurement results show that the dynamic range（DR） of the proposed ADC can change from 55to 95 dB with the configurable OSR from 16 to 256. The spurious free dynamic range（SFDR） and signal-to-noise distortion ratio（SNDR） can get 99 dB and 86.5 dB, respectively.
