A novel carbon foam with microporous structure(CFMS),with the advantages of a simple fabrication process,low energy consumption,large specific surface area and high conductivity,has been prepared by a facile one-step ...A novel carbon foam with microporous structure(CFMS),with the advantages of a simple fabrication process,low energy consumption,large specific surface area and high conductivity,has been prepared by a facile one-step carbonization.In addition,the carbon foam possesses suitable interlayer spacing in short range which is flexible to accommodate the deformation of carbon layer caused by the ion insertion and deinsertion at the charge and discharge state.Furthermore,a low cost carbon-based symmetric potassium dual-ion capacitor(PDIC),which integrates the virtues of potassium ion capacitors and dual-ion batteries,is successfully established with CFMS as both the battery-type cathode and the capacitor-type anode.PDIC displays a superior rate performance,an ultra-long cycle life(90%retention after 10000 cycles),and a high power density of 7800 W kg^-1 at an energy density of 39Whkg^-1.The PDIC also exhibits excellent ultrafast charge and slow discharge properties,with a full charge in just 60 s and a discharge time of more than 3000 s.展开更多
The structure identification and carbonation characteristics of several potassium-based supported sorbents for CO2 capture were investigated with TGA,XRD,XRF,SEM and N2 adsorption method.Potassium-based sorbents were ...The structure identification and carbonation characteristics of several potassium-based supported sorbents for CO2 capture were investigated with TGA,XRD,XRF,SEM and N2 adsorption method.Potassium-based sorbents were prepared by impregnation with potassium carbonate on supports,such as cocoanut activated charcoal(AC1),coal active carbon(AC2),silica gel(SG)and diatomite(DT)using the iso-volume impregnation method.The results showed that the K2CO3 loading amounts of AC1,AC2,SG and DT were 24.1%,22.5%,21.7% and 19.1% respectively.The surface area and pore volume of K2CO3/AC1 and K2CO3/AC2 were larger than others.In contrast,those of K2CO3/DT were small.For K2CO3/SG,pore volume was large but surface area was small.K2CO3/AC1 and K2CO3/AC2 showed excellent carbonation capacity.However,the carbonation capacities of K2CO3/SG and K2CO3/DT were low.The difference in carbonation capacity of those sorbents were attributed to the difference in pore structure,leading to different supported sorbents.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.51672078 and 21473052)Hunan University State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Independent Research Project(No.71675004)+2 种基金the Fundamental Research Funds for the Central UniversitiesHunan Natural Science Foundation(2019JJ40031)Foundation of State Key Laboratory of Coal Conversion(Grant J1718-903)。
文摘A novel carbon foam with microporous structure(CFMS),with the advantages of a simple fabrication process,low energy consumption,large specific surface area and high conductivity,has been prepared by a facile one-step carbonization.In addition,the carbon foam possesses suitable interlayer spacing in short range which is flexible to accommodate the deformation of carbon layer caused by the ion insertion and deinsertion at the charge and discharge state.Furthermore,a low cost carbon-based symmetric potassium dual-ion capacitor(PDIC),which integrates the virtues of potassium ion capacitors and dual-ion batteries,is successfully established with CFMS as both the battery-type cathode and the capacitor-type anode.PDIC displays a superior rate performance,an ultra-long cycle life(90%retention after 10000 cycles),and a high power density of 7800 W kg^-1 at an energy density of 39Whkg^-1.The PDIC also exhibits excellent ultrafast charge and slow discharge properties,with a full charge in just 60 s and a discharge time of more than 3000 s.
文摘The structure identification and carbonation characteristics of several potassium-based supported sorbents for CO2 capture were investigated with TGA,XRD,XRF,SEM and N2 adsorption method.Potassium-based sorbents were prepared by impregnation with potassium carbonate on supports,such as cocoanut activated charcoal(AC1),coal active carbon(AC2),silica gel(SG)and diatomite(DT)using the iso-volume impregnation method.The results showed that the K2CO3 loading amounts of AC1,AC2,SG and DT were 24.1%,22.5%,21.7% and 19.1% respectively.The surface area and pore volume of K2CO3/AC1 and K2CO3/AC2 were larger than others.In contrast,those of K2CO3/DT were small.For K2CO3/SG,pore volume was large but surface area was small.K2CO3/AC1 and K2CO3/AC2 showed excellent carbonation capacity.However,the carbonation capacities of K2CO3/SG and K2CO3/DT were low.The difference in carbonation capacity of those sorbents were attributed to the difference in pore structure,leading to different supported sorbents.
