Recently,high-and medium-entropy alloys(HEAs and MEAs) have been found to exhibit excellent cryogenic mechanical properties,but most of them contain high-priced Co element.Therefore,developing HEAs or MEAs with high s...Recently,high-and medium-entropy alloys(HEAs and MEAs) have been found to exhibit excellent cryogenic mechanical properties,but most of them contain high-priced Co element.Therefore,developing HEAs or MEAs with high strength and ductility and relatively low cost is urgent.In this work,novel Cofree Fex Mn(75-x) Ni(10)Cr(15)(x=50 and 55 at.%) MEAs were developed,which exhibit a good combination of low cost,high strength and ductility at cryogenic temperature.It was found that the Fe(50)Mn(25)Ni(10)Cr(15)MEA exhibits a combination of cryogenic tensile strength of^0.98 GPa and ductility of^83 %.The excellent cryogenic mechanical properties were attributed to joint of twinning-induced plasticity(TWIP) and transformation-induced plasticity(TRIP) effects.The present study sheds light on developing low cost MEAs with high perfo rmance for cryogenic-tempe rature applications.展开更多
Intercritical annealing（IA） at various temperatures followed by quenching and partitioning（IAQP） treatments was conducted on a cold-rolled Fe-0.2C-1.42Si-l.87Mn（wt%） sheet steel.Optimized microstructure and enha...Intercritical annealing（IA） at various temperatures followed by quenching and partitioning（IAQP） treatments was conducted on a cold-rolled Fe-0.2C-1.42Si-l.87Mn（wt%） sheet steel.Optimized microstructure and enhanced mechanical properties were achieved through appropriate adjustment of IA temperatures.The steel which was annealed at1,033 K for 600 s,then quenched to 573 K and partitioned at 693 K for 20 min,designated as 1033 QP steel,exhibits maximum 16.3 vol% retained austenite（RA） with good mechanical properties（ultimate tensile strength 886 MPa and total elongation 27%）.It was found that the thermal and mechanical stabilities of RA are mainly influenced by the combined effect of its average carbon content and amount of adjacent martensite.Furthermore,the transformation-induced plasticity effect increased the peak n-values observed at the second stage of the work hardening of IAQP steels.展开更多
An ultrafine-grained(UFG) low-carbon medium-manganese steel was fabricated by the heavily warm rolling(HWR) and subsequent quenching, and the effects of annealing temperatures on microstructure and mechanical properti...An ultrafine-grained(UFG) low-carbon medium-manganese steel was fabricated by the heavily warm rolling(HWR) and subsequent quenching, and the effects of annealing temperatures on microstructure and mechanical properties of the UFG HWRed steel were investigated. The results show that the HWRed steel exhibits simultaneous improvements in strength,uniform elongation and work hardening, which is mainly attributed to the refinement of martensitic microstructures. The HWRed steels comprise only a-phase when annealing at lower temperatures below to 550 °C and at higher temperatures above to 700 °C. Whereas, UFG c-austenite is formed by reverse transformation when the HWRed steel was annealed at intermediate temperatures from 550 to 700 °C and the volume fraction increases with increasing annealing temperatures,consequently resulting in a dramatic increase in ductility of the annealed HWRed steels. It was found that the transformed UFG austenite and ferrite remained ～500 nm and ～800 nm in size when the HWRed steel was annealed at 650 and700 °C for 1 h, respectively, showing an excellent thermal stability. Moreover, the HWRed steel annealed at 650 °C exhibits high strength-ductility combinations with a yield strength of 906 MPa, ultimate tensile strength(UTS) of1011 MPa, total elongation(TEL) of 51% and product of strength and elongation(PSE: UTS 9 TEL) of 52 GPa%. It is believed that these excellent comprehensive mechanical properties are closely associated with the UFG austenite formation by reverse transformation and principally attributed to the transformation-induced plasticity(TRIP) effect.展开更多
A new type of high strength steel containing a significant amount of stable retained austenite was obtained by austempering immediately after intercritical annealing.This sort of low carbon steel only contains alloyin...A new type of high strength steel containing a significant amount of stable retained austenite was obtained by austempering immediately after intercritical annealing.This sort of low carbon steel only contains alloying elements of silicon and manganese rather than nickel and chromium.Its mechanical properties were enhanced considerably due to strain-induced martensite transformation and transformation-induced plasticity(TRIP)of retained austenite when it was strained at temperatures between Msand Md,because retained austenite was moderately stabilized due to carbon enrichment by austempering.Austempering was carried out at different temperatures and 400 ℃ was found to be optimal.Tensile strength,total elongation and strength-ductility balance reached the maximum values and the product of tensile strength and total elongation exceeded 30 135 MPa % when the TRIP steel was held at 400 ℃ and strained at 350 ℃.展开更多
The effect of nitrogen on microstructural evolution and tensile properties of transformation-induced plasticity(TRIP)Fe_(50)Mn_(30)Co_(10)Cr_(10)HEAs was investigated.Nitrogen was fully introduced in solid solution by...The effect of nitrogen on microstructural evolution and tensile properties of transformation-induced plasticity(TRIP)Fe_(50)Mn_(30)Co_(10)Cr_(10)HEAs was investigated.Nitrogen was fully introduced in solid solution by pressure-induced melting technique.Nitrogen addition turned the TRIP alloy to a twinning-induced plasticity(TWIP)alloy,and simultaneously improved the strength and elongation.For the nitrogen-doped HEA,the high yield strength is mainly resulted from the friction stress via interstitial strengthening effect,and the high ductility is originated from retained high strain-hardening capability via the successive onset of dislocation accumulation and deformation twinning.The strain-hardening behavior and microstructural evolution at specified strains were revealed.展开更多
Effects of Cr addition(0,3,and 6 wt%) on Charpy impact properties of Fe-C-Mn-Cr-based steels were studied by conducting dynamic compression tests at room and cryogenic temperatures.At room temperature,deformation mech...Effects of Cr addition(0,3,and 6 wt%) on Charpy impact properties of Fe-C-Mn-Cr-based steels were studied by conducting dynamic compression tests at room and cryogenic temperatures.At room temperature,deformation mechanisms of Charpy impacted specimens were observed as twinning induced plasticity(TWIP) without any transfo rmation induced plasticity(TRIP) in all the steels.At cryogenic temperature,many twins were populated in the Cr-added steels,but,interestingly,fine ε-martensite was found in the OCr steel,satisfying the Shoji-Nishiyama(S-N) orientation relationship,{111}γ//{0002}ε and <101>γ//<1120>ε.Even though the cryogenic-temperature staking fault energies(SFEs) of the three steel were situated in the TWIP regime,the martensitic transformation was induced by Mn-and Cr-segregated bands.In the OCr steel,SFEs of low-(Mn,Cr) bands lay between the TWIP and TRIP regimes which were sensitively affected by a small change of SFE.The dynamic compressive test results well showed the relation between segregation bands and the SFEs.Effects of Cr were known as not only increasing the SFE but also promoting the carbide precipitation.In order to identify the possibility of carbide formation,a precipitation kinetics simulation was conducted,and the predicted fractions of precipitated M23C6 were negligible,0.4-1.1×10-5,even at the low cooling rate of 10℃/s.展开更多
The microstructure, mechanical properties and retained austenite stability of CMnAlSi-TRIP steels were investigated. Optical microscopy and X-ray diffractometry were used to analyze the microstructure, volume fraction...The microstructure, mechanical properties and retained austenite stability of CMnAlSi-TRIP steels were investigated. Optical microscopy and X-ray diffractometry were used to analyze the microstructure, volume fraction and carbon concentration of retained austenite, while the tensile tests were performed to study the retained austenite stability against strain-induced martensitic transformation. The results show that the mechanical properties of the CMnAlSi cold-rolled TRIP-aided steels fabricated by proper heat treatment display good combination of strength and ductility after isothermal bainitic transformation (IBT) treatment at 420-450 ℃ for 60-120 s. The austenite transformation kinetics is influenced significantly by the IBT temperature, and the high mechanical stability of retained austenite, governed by its carbon concentration, and determines high strain hardening during deformation.展开更多
High-strength bainitic steels have created a lot of interest in recent times because of their excellent combination of strength,ductility,toughness,and high ballistic mass efficiency.Bainitic steels have great potenti...High-strength bainitic steels have created a lot of interest in recent times because of their excellent combination of strength,ductility,toughness,and high ballistic mass efficiency.Bainitic steels have great potential in the fabrication of steel armor plates.Although various approaches and methods have been conducted to utilize the retained austenite(RA)in the bainitic matrix to control mechanical properties,very few attempts have been conducted to improve ballistic performance utilizing transformationinduced plasticity(TRIP)mechanism.In this study,high-strength bainitic steels were designed by controlling the time of austempering process to have various volume fractions and stability of RA while maintaining high hardness.The dynamic compressive and ballistic impact tests were conducted,and the relation between the effects of TRIP on ballistic performance and the adiabatic shear band(ASB)formation was analyzed.Our results show for the first time that an active TRIP mechanism achieved from a large quantity of metastable RA can significantly enhance the ballistic performance of high-strength bainitic steels because of the improved resistance to ASB formation.Thus,the ballistic performance can be effectively improved by a very short austempering time,which suggests that the utilization of active TRIP behavior via tuning RA acts as a primary mechanism for significantly enhancing the ballistic performance of high-strength bainitic steels.展开更多
基金financially supported by the National Natural Science Foundation of China (Nos. U1832203, 11975202, U1704159 and 51701183)the Key Research & Development and Promotion of Special Project of Henan Province (Science & Technology) (No. 192102210006)。
文摘Recently,high-and medium-entropy alloys(HEAs and MEAs) have been found to exhibit excellent cryogenic mechanical properties,but most of them contain high-priced Co element.Therefore,developing HEAs or MEAs with high strength and ductility and relatively low cost is urgent.In this work,novel Cofree Fex Mn(75-x) Ni(10)Cr(15)(x=50 and 55 at.%) MEAs were developed,which exhibit a good combination of low cost,high strength and ductility at cryogenic temperature.It was found that the Fe(50)Mn(25)Ni(10)Cr(15)MEA exhibits a combination of cryogenic tensile strength of^0.98 GPa and ductility of^83 %.The excellent cryogenic mechanical properties were attributed to joint of twinning-induced plasticity(TWIP) and transformation-induced plasticity(TRIP) effects.The present study sheds light on developing low cost MEAs with high perfo rmance for cryogenic-tempe rature applications.
基金financially supported by the National Natural Science Foundation of China (No. 51174251)the National Basic Research Program of China (No. 2010CB630803)
文摘Intercritical annealing（IA） at various temperatures followed by quenching and partitioning（IAQP） treatments was conducted on a cold-rolled Fe-0.2C-1.42Si-l.87Mn（wt%） sheet steel.Optimized microstructure and enhanced mechanical properties were achieved through appropriate adjustment of IA temperatures.The steel which was annealed at1,033 K for 600 s,then quenched to 573 K and partitioned at 693 K for 20 min,designated as 1033 QP steel,exhibits maximum 16.3 vol% retained austenite（RA） with good mechanical properties（ultimate tensile strength 886 MPa and total elongation 27%）.It was found that the thermal and mechanical stabilities of RA are mainly influenced by the combined effect of its average carbon content and amount of adjacent martensite.Furthermore,the transformation-induced plasticity effect increased the peak n-values observed at the second stage of the work hardening of IAQP steels.
基金financially supported by the National Major Science and Technology Project of China (No. 2014ZX07214-002)
文摘An ultrafine-grained(UFG) low-carbon medium-manganese steel was fabricated by the heavily warm rolling(HWR) and subsequent quenching, and the effects of annealing temperatures on microstructure and mechanical properties of the UFG HWRed steel were investigated. The results show that the HWRed steel exhibits simultaneous improvements in strength,uniform elongation and work hardening, which is mainly attributed to the refinement of martensitic microstructures. The HWRed steels comprise only a-phase when annealing at lower temperatures below to 550 °C and at higher temperatures above to 700 °C. Whereas, UFG c-austenite is formed by reverse transformation when the HWRed steel was annealed at intermediate temperatures from 550 to 700 °C and the volume fraction increases with increasing annealing temperatures,consequently resulting in a dramatic increase in ductility of the annealed HWRed steels. It was found that the transformed UFG austenite and ferrite remained ～500 nm and ～800 nm in size when the HWRed steel was annealed at 650 and700 °C for 1 h, respectively, showing an excellent thermal stability. Moreover, the HWRed steel annealed at 650 °C exhibits high strength-ductility combinations with a yield strength of 906 MPa, ultimate tensile strength(UTS) of1011 MPa, total elongation(TEL) of 51% and product of strength and elongation(PSE: UTS 9 TEL) of 52 GPa%. It is believed that these excellent comprehensive mechanical properties are closely associated with the UFG austenite formation by reverse transformation and principally attributed to the transformation-induced plasticity(TRIP) effect.
基金Sponsored by National Natural Science Foundation of China(50334010)
文摘A new type of high strength steel containing a significant amount of stable retained austenite was obtained by austempering immediately after intercritical annealing.This sort of low carbon steel only contains alloying elements of silicon and manganese rather than nickel and chromium.Its mechanical properties were enhanced considerably due to strain-induced martensite transformation and transformation-induced plasticity(TRIP)of retained austenite when it was strained at temperatures between Msand Md,because retained austenite was moderately stabilized due to carbon enrichment by austempering.Austempering was carried out at different temperatures and 400 ℃ was found to be optimal.Tensile strength,total elongation and strength-ductility balance reached the maximum values and the product of tensile strength and total elongation exceeded 30 135 MPa % when the TRIP steel was held at 400 ℃ and strained at 350 ℃.
基金financially supported by the National Natural Science Foundation of China(Nos.U1960203,51774074,51434004 and U1435205)the Fundamental Research Funds for the Central Universities(No.N180204015)+1 种基金the Shanxi Municipal Major Science&Technology Project(No.20181101014)the Fundamental Research Funds for the Central Universities(No.N172512033)。
文摘The effect of nitrogen on microstructural evolution and tensile properties of transformation-induced plasticity(TRIP)Fe_(50)Mn_(30)Co_(10)Cr_(10)HEAs was investigated.Nitrogen was fully introduced in solid solution by pressure-induced melting technique.Nitrogen addition turned the TRIP alloy to a twinning-induced plasticity(TWIP)alloy,and simultaneously improved the strength and elongation.For the nitrogen-doped HEA,the high yield strength is mainly resulted from the friction stress via interstitial strengthening effect,and the high ductility is originated from retained high strain-hardening capability via the successive onset of dislocation accumulation and deformation twinning.The strain-hardening behavior and microstructural evolution at specified strains were revealed.
基金supported financially by the Korea University Grant for the eighth author, the Ministry of Knowledge Economy (No. 10044574-2013-45)Brain Korea 21 Plus Project for Center for Creative Industrial materialsKorea Institute for Advancement of Technology (KIAT) grant funded by the Korea Government (MOTIE) (No. P0002020, The Competency Development Program for Industry Specialist)。
文摘Effects of Cr addition(0,3,and 6 wt%) on Charpy impact properties of Fe-C-Mn-Cr-based steels were studied by conducting dynamic compression tests at room and cryogenic temperatures.At room temperature,deformation mechanisms of Charpy impacted specimens were observed as twinning induced plasticity(TWIP) without any transfo rmation induced plasticity(TRIP) in all the steels.At cryogenic temperature,many twins were populated in the Cr-added steels,but,interestingly,fine ε-martensite was found in the OCr steel,satisfying the Shoji-Nishiyama(S-N) orientation relationship,{111}γ//{0002}ε and <101>γ//<1120>ε.Even though the cryogenic-temperature staking fault energies(SFEs) of the three steel were situated in the TWIP regime,the martensitic transformation was induced by Mn-and Cr-segregated bands.In the OCr steel,SFEs of low-(Mn,Cr) bands lay between the TWIP and TRIP regimes which were sensitively affected by a small change of SFE.The dynamic compressive test results well showed the relation between segregation bands and the SFEs.Effects of Cr were known as not only increasing the SFE but also promoting the carbide precipitation.In order to identify the possibility of carbide formation,a precipitation kinetics simulation was conducted,and the predicted fractions of precipitated M23C6 were negligible,0.4-1.1×10-5,even at the low cooling rate of 10℃/s.
基金Project(2008BS04023) supported by the Science Foundation for Excellent Young Scientist of Shandong Province, China
文摘The microstructure, mechanical properties and retained austenite stability of CMnAlSi-TRIP steels were investigated. Optical microscopy and X-ray diffractometry were used to analyze the microstructure, volume fraction and carbon concentration of retained austenite, while the tensile tests were performed to study the retained austenite stability against strain-induced martensitic transformation. The results show that the mechanical properties of the CMnAlSi cold-rolled TRIP-aided steels fabricated by proper heat treatment display good combination of strength and ductility after isothermal bainitic transformation (IBT) treatment at 420-450 ℃ for 60-120 s. The austenite transformation kinetics is influenced significantly by the IBT temperature, and the high mechanical stability of retained austenite, governed by its carbon concentration, and determines high strain hardening during deformation.
基金supported by the Agency for Defense Development(grant No.UE161030GD)the Korea University Grant for Dr.S.S.Sohnthe BK21 Plus Project for Center for Creative Industrial Materials。
文摘High-strength bainitic steels have created a lot of interest in recent times because of their excellent combination of strength,ductility,toughness,and high ballistic mass efficiency.Bainitic steels have great potential in the fabrication of steel armor plates.Although various approaches and methods have been conducted to utilize the retained austenite(RA)in the bainitic matrix to control mechanical properties,very few attempts have been conducted to improve ballistic performance utilizing transformationinduced plasticity(TRIP)mechanism.In this study,high-strength bainitic steels were designed by controlling the time of austempering process to have various volume fractions and stability of RA while maintaining high hardness.The dynamic compressive and ballistic impact tests were conducted,and the relation between the effects of TRIP on ballistic performance and the adiabatic shear band(ASB)formation was analyzed.Our results show for the first time that an active TRIP mechanism achieved from a large quantity of metastable RA can significantly enhance the ballistic performance of high-strength bainitic steels because of the improved resistance to ASB formation.Thus,the ballistic performance can be effectively improved by a very short austempering time,which suggests that the utilization of active TRIP behavior via tuning RA acts as a primary mechanism for significantly enhancing the ballistic performance of high-strength bainitic steels.
