To improve the cruise flight performance of aircraft, two new configurations of plasma actuators(grid-type and super-dense array) were investigated to reduce the turbulent skin friction drag of a low-speed airfoil. Th...To improve the cruise flight performance of aircraft, two new configurations of plasma actuators(grid-type and super-dense array) were investigated to reduce the turbulent skin friction drag of a low-speed airfoil. The induced jet characteristics of the two actuators in quiescent air were diagnosed with high-speed particle image velocimetry(PIV), and their drag reduction efficiencies were examined under different operating conditions in a wind tunnel. The results showed that the grid-type plasma actuator was capable of producing a wall-normal jet array(peak magnitude: 1.07 m/s) similar to that generated in a micro-blowing technique, while the superdense array plasma actuator created a wavy wall-parallel jet(magnitude: 0.94 m/s) due to the discrete spanwise electrostatic forces. Under a comparable electrical power consumption level,the super-dense array plasma actuator array significantly outperformed the grid-type configuration,reducing the total airfoil friction drag by approximately 22% at a free-stream velocity of 20 m/s.The magnitude of drag reduction was proportional to the dimensionless jet velocity ratio(r), and a threshold r = 0.014 existed under which little impact on airfoil drag could be discerned.展开更多
It is a very difficult task to develop a method of reducing turbulent boundary layer drag.However,in recent years,plasma flow control technology has demonstrated huge potential in friction drag reduction.To further in...It is a very difficult task to develop a method of reducing turbulent boundary layer drag.However,in recent years,plasma flow control technology has demonstrated huge potential in friction drag reduction.To further investigate this issue,a smooth plate model was designed as a testing object arranged with a bidirectional dielectric-barrier-discharge(DBD)plasma actuator.In addition,measurement of skin friction drag was achieved by applying hot wire anemometry to obtain the velocity distribution of the turbulent boundary layer.A method of quantifying the friction drag effect was adopted based on the Spalding formula fitted with the experiment data.When plasma actuation was conducted,a velocity defect occurred at the two measuring positions,compared with the no plasma control condition;this means that the DBD plasma actuation could reduce the drag successfully in the downstream of the actuator.Moreover,drag reduction caused by backward actuation was slightly more efficient than that caused by forward actuation.With an increasing distance from plasma actuation,the drag-reduction effect could become weaker.Experimental results also show that the improvement of drag-reduction efficiency using a DBD plasma actuator can achieve about 8.78%in the local region of the experimental flat model.展开更多
Large Eddy Simulation(LES)is first used to investigate the drag reduction effect of an array-based configuration of Plasma Synthetic Jet Actuators(PSJAs)on a hemisphere in supersonic inflow,and analyze the effect of e...Large Eddy Simulation(LES)is first used to investigate the drag reduction effect of an array-based configuration of Plasma Synthetic Jet Actuators(PSJAs)on a hemisphere in supersonic inflow,and analyze the effect of energy allocation and array angle on the drag reduction performance of opposing Plasma Synthetic Jet(PSJ)in this paper.Numerical simulation results have been compared with experimental data,confirming the validity of the simulation method.The results show that different energy allocations have a significant effect on the drag of the hemisphere.However,the effect of the change in array angle on the drag of the hemisphere is not as noticeable as the effect caused by energy allocation.Interference regions between the two PSJAs occur,which undermine the effectiveness of drag reduction.High Turbulent Kinetic Energy(TKE)regions primarily concentrate on the core region of the jet and downstream of the bow shock.The influence of the array angle on TKE is most evident in the downstream region of the exits of the PSJs on both sides.Temporal evolution of the coherent structures reveals that as the PSJ intensity decreases,the largescale vortices progressively break up into smaller-scale vortices,and energy is also transferred from large-scale structures to small-scale structures.展开更多
Shock wave is a detriment in the development of supersonic aircrafts;it increases flow drag as well as surface heating from additional friction;it also initiates sonic boom on the ground which precludes supersonic jet...Shock wave is a detriment in the development of supersonic aircrafts;it increases flow drag as well as surface heating from additional friction;it also initiates sonic boom on the ground which precludes supersonic jetliner to fly overland. A shock wave mitigation technique is demonstrated by experiments conducted in a Mach 2.5 wind tunnel. Non-thermal air plasma generated symmetrically in front of a wind tunnel model and upstream of the shock, by on-board 60 Hz periodic electric arc discharge, works as a plasma deflector, it deflects incoming flow to transform the shock from a well-defined attached shock into a highly curved shock structure. In a sequence with increasing discharge intensity, the transformed curve shock increases shock angle and moves upstream to become detached with increasing standoff distance from the model. It becomes diffusive and disappears near the peak of the discharge. The flow deflection increases the equivalent cone angle of the model, which in essence, reduces the equivalent Mach number of the incoming flow, manifesting the reduction of the shock wave drag on the cone. When this equivalent cone angle exceeds a critical angle, the shock becomes detached and fades away. This shock wave mitigation technique helps drag reduction as well as eliminates sonic boom.展开更多
The interaction of laser-induced plasma and bow shock over a blunt body is inves- tigated numerically in an M∞ =6.5 supersonic flow. A ray-tracing method is used for simulating the process of laser focusing. The gas ...The interaction of laser-induced plasma and bow shock over a blunt body is inves- tigated numerically in an M∞ =6.5 supersonic flow. A ray-tracing method is used for simulating the process of laser focusing. The gas located at the focused zone is ionized and broken down and transformed into plasma. In a supersonic flow the plasma moves downstream and begins to interact with the bow shock when it approaches the surface of the blunt body. The parameters of flowfield and blunt body surface are changed due to the interaction. By analyzing phenomena occurring in the complex unsteady flowfield during the interaction in detail, we can better under- stand the change of pressure on the blunt body surface and the mechanism of drag reduction by laser energy deposition. The results show that the bow shock is changed into an oblique shock due to the interaction of the laser-induced low-density zone with the bow shock, so the wave drag of the blunt body is reduced.展开更多
报道了利用飞秒激光产生的等离子体冲击波对高超声速飞行的钝体飞行器进行减阻的研究。通过模拟计算了距离地球表面30 km、来流马赫数为5的大气环境中,飞秒激光能量注入后产生的等离子体冲击波与钝体飞行器头部正激波相互耦合的演化过程...报道了利用飞秒激光产生的等离子体冲击波对高超声速飞行的钝体飞行器进行减阻的研究。通过模拟计算了距离地球表面30 km、来流马赫数为5的大气环境中,飞秒激光能量注入后产生的等离子体冲击波与钝体飞行器头部正激波相互耦合的演化过程,分析了飞秒激光等离子体减阻的机理。通过求解Navier-Stokes方程,计算了飞秒激光能量对飞行器减阻效果的影响。结果发现,利用飞秒激光产生的等离子体冲击波比纳秒激光等离子体冲击波对飞行器的减阻效果更明显。当飞秒激光能量为0.06 m J时,能使飞行器所受的阻力减小98%,飞秒激光能量越高,减阻比越高,低阻力持续的时间越长,减阻效果越好。采用3个飞秒激光能量点源沉积的方式能够更好地实现飞行器的减阻,提高了最佳减阻比,节省了激光能量。展开更多
基金supported by National Natural Science Foundation of China (Nos.12002384, U2341277,and 52025064)Foundation Strengthening Program (No.2021JJ-0786)。
文摘To improve the cruise flight performance of aircraft, two new configurations of plasma actuators(grid-type and super-dense array) were investigated to reduce the turbulent skin friction drag of a low-speed airfoil. The induced jet characteristics of the two actuators in quiescent air were diagnosed with high-speed particle image velocimetry(PIV), and their drag reduction efficiencies were examined under different operating conditions in a wind tunnel. The results showed that the grid-type plasma actuator was capable of producing a wall-normal jet array(peak magnitude: 1.07 m/s) similar to that generated in a micro-blowing technique, while the superdense array plasma actuator created a wavy wall-parallel jet(magnitude: 0.94 m/s) due to the discrete spanwise electrostatic forces. Under a comparable electrical power consumption level,the super-dense array plasma actuator array significantly outperformed the grid-type configuration,reducing the total airfoil friction drag by approximately 22% at a free-stream velocity of 20 m/s.The magnitude of drag reduction was proportional to the dimensionless jet velocity ratio(r), and a threshold r = 0.014 existed under which little impact on airfoil drag could be discerned.
文摘It is a very difficult task to develop a method of reducing turbulent boundary layer drag.However,in recent years,plasma flow control technology has demonstrated huge potential in friction drag reduction.To further investigate this issue,a smooth plate model was designed as a testing object arranged with a bidirectional dielectric-barrier-discharge(DBD)plasma actuator.In addition,measurement of skin friction drag was achieved by applying hot wire anemometry to obtain the velocity distribution of the turbulent boundary layer.A method of quantifying the friction drag effect was adopted based on the Spalding formula fitted with the experiment data.When plasma actuation was conducted,a velocity defect occurred at the two measuring positions,compared with the no plasma control condition;this means that the DBD plasma actuation could reduce the drag successfully in the downstream of the actuator.Moreover,drag reduction caused by backward actuation was slightly more efficient than that caused by forward actuation.With an increasing distance from plasma actuation,the drag-reduction effect could become weaker.Experimental results also show that the improvement of drag-reduction efficiency using a DBD plasma actuator can achieve about 8.78%in the local region of the experimental flat model.
基金supported by the National Science and Technology Major Project of China (No. J2019-Ⅲ-00100054)the National Natural Science Foundation of China (Nos. 52075538, 12202488, 92271110)+1 种基金the Natural Science Foundation of Hunan Province, China (No. 2023JJ30622)the Natural Science Program of National University of Defense Technology, China (No. ZK22-30)
文摘Large Eddy Simulation(LES)is first used to investigate the drag reduction effect of an array-based configuration of Plasma Synthetic Jet Actuators(PSJAs)on a hemisphere in supersonic inflow,and analyze the effect of energy allocation and array angle on the drag reduction performance of opposing Plasma Synthetic Jet(PSJ)in this paper.Numerical simulation results have been compared with experimental data,confirming the validity of the simulation method.The results show that different energy allocations have a significant effect on the drag of the hemisphere.However,the effect of the change in array angle on the drag of the hemisphere is not as noticeable as the effect caused by energy allocation.Interference regions between the two PSJAs occur,which undermine the effectiveness of drag reduction.High Turbulent Kinetic Energy(TKE)regions primarily concentrate on the core region of the jet and downstream of the bow shock.The influence of the array angle on TKE is most evident in the downstream region of the exits of the PSJs on both sides.Temporal evolution of the coherent structures reveals that as the PSJ intensity decreases,the largescale vortices progressively break up into smaller-scale vortices,and energy is also transferred from large-scale structures to small-scale structures.
文摘Shock wave is a detriment in the development of supersonic aircrafts;it increases flow drag as well as surface heating from additional friction;it also initiates sonic boom on the ground which precludes supersonic jetliner to fly overland. A shock wave mitigation technique is demonstrated by experiments conducted in a Mach 2.5 wind tunnel. Non-thermal air plasma generated symmetrically in front of a wind tunnel model and upstream of the shock, by on-board 60 Hz periodic electric arc discharge, works as a plasma deflector, it deflects incoming flow to transform the shock from a well-defined attached shock into a highly curved shock structure. In a sequence with increasing discharge intensity, the transformed curve shock increases shock angle and moves upstream to become detached with increasing standoff distance from the model. It becomes diffusive and disappears near the peak of the discharge. The flow deflection increases the equivalent cone angle of the model, which in essence, reduces the equivalent Mach number of the incoming flow, manifesting the reduction of the shock wave drag on the cone. When this equivalent cone angle exceeds a critical angle, the shock becomes detached and fades away. This shock wave mitigation technique helps drag reduction as well as eliminates sonic boom.
基金supported by National Natural Science Foundation of China(No.90916015)
文摘The interaction of laser-induced plasma and bow shock over a blunt body is inves- tigated numerically in an M∞ =6.5 supersonic flow. A ray-tracing method is used for simulating the process of laser focusing. The gas located at the focused zone is ionized and broken down and transformed into plasma. In a supersonic flow the plasma moves downstream and begins to interact with the bow shock when it approaches the surface of the blunt body. The parameters of flowfield and blunt body surface are changed due to the interaction. By analyzing phenomena occurring in the complex unsteady flowfield during the interaction in detail, we can better under- stand the change of pressure on the blunt body surface and the mechanism of drag reduction by laser energy deposition. The results show that the bow shock is changed into an oblique shock due to the interaction of the laser-induced low-density zone with the bow shock, so the wave drag of the blunt body is reduced.
文摘报道了利用飞秒激光产生的等离子体冲击波对高超声速飞行的钝体飞行器进行减阻的研究。通过模拟计算了距离地球表面30 km、来流马赫数为5的大气环境中,飞秒激光能量注入后产生的等离子体冲击波与钝体飞行器头部正激波相互耦合的演化过程,分析了飞秒激光等离子体减阻的机理。通过求解Navier-Stokes方程,计算了飞秒激光能量对飞行器减阻效果的影响。结果发现,利用飞秒激光产生的等离子体冲击波比纳秒激光等离子体冲击波对飞行器的减阻效果更明显。当飞秒激光能量为0.06 m J时,能使飞行器所受的阻力减小98%,飞秒激光能量越高,减阻比越高,低阻力持续的时间越长,减阻效果越好。采用3个飞秒激光能量点源沉积的方式能够更好地实现飞行器的减阻,提高了最佳减阻比,节省了激光能量。
